habitat 4010106 Cassidy 5 Shelf Shoe Storage Cabinet Instruction Manual

June 9, 2024
habitat

habitat-LOGO

habitat 4010106 Cassidy 5 Shelf Shoe Storage Cabinet

Product Details
Cassidy oak shoe storage cabinet 4010106
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.

  • Keep children and animals away from the work area, small parts could choke if swallowed.
  • Make sure you have enough space to layout the parts before starting.
  • This product has been constructed to be used in the domestic environment only and not for commercial purposes.
  • Assemble the item as close to its final position(in the same room) as possible.
  • Assemble on a soft level surface to avoid damaging the unit or your floor.
  • We do not recommend the use of power drill/drivers for inserting screws as this could damage the unit. Only use hand screwdrivers.
  • Parts of the assembly will be easier with 2 people.
  • Dispose of all packaging carefully and responsibly.

Care and maintenance

  • Only clean using a damp cloth and mild detergent. Do not use abrasive cleaners.
  • Use a dry cloth to clean the product, furniture polish is not recommended.
  • From time to time check that there are no loose screws, nuts or bolts. If there are please re-tighten.
  • This product should not be discarded with household waste. Take to your local authority waste disposal centre.

Additional Guidance

  • Assemble all parts and bolts loosely during assembly, only once the product is complete should you fully tighten the bolts.
  • Regularly check and ensure that all bolts and fittings are tightened properly.
  • Maximum loading weight 45kg/per layer.
  • This product is compliant with EN14749, BS4875-7.
  • Any additional or replacement parts are obtained from the manufacturer.

Fittings

(Shown to scale)

Bag 1

habitat-4010106-Cassidy-5-Shelf-Shoe-Storage-Cabinet-
FIG-1

Tools required

habitat-4010106-Cassidy-5-Shelf-Shoe-Storage-Cabinet-
FIG-2

Panels

habitat-4010106-Cassidy-5-Shelf-Shoe-Storage-Cabinet-
FIG-2

INSTALLATION INSTRUCTION

habitat-4010106-Cassidy-5-Shelf-Shoe-Storage-
Cabinet-FIG-4 habitat-4010106-Cassidy-5-Shelf-Shoe-Storage-Cabinet-
FIG-5 habitat-4010106-Cassidy-5-Shelf-Shoe-Storage-Cabinet-
FIG-6 habitat-4010106-Cassidy-5-Shelf-Shoe-Storage-Cabinet-
FIG-7 habitat-4010106-Cassidy-5-Shelf-Shoe-Storage-Cabinet-
FIG-8 habitat-4010106-Cassidy-5-Shelf-Shoe-Storage-Cabinet-
FIG-9 habitat-4010106-Cassidy-5-Shelf-Shoe-Storage-Cabinet-
FIG-10 habitat-4010106-Cassidy-5-Shelf-Shoe-Storage-Cabinet-
FIG-11

WARNING!

In order to prevent overturning this product must be used with the wall attachment device provided. Serious or fatal crushing injuries can occur from furniture tipping over. To help prevent topple over :-

  • Use the wall attachment devices provided
  • Never allow children to climb or hang on drawers
  • Do not overload the drawer beyond maximum recommended loading.
  • Place heaviest items in the lower drawers or shelves.
  • Unless specifically designed to accommodate, do not set TV’s or other heavy objects on top of this product
  • Never open more than one drawer at a time
  • An attachment device is provided with your product, however you will need to source suitable fixings for your wall type.
  • If in doubt consult a qualified trades person.
  • Always ensure that the wall to be drilled into is free from hidden electrical wires, water and gas pipes.

habitat-4010106-Cassidy-5-Shelf-Shoe-Storage-Cabinet-
FIG-13

A Guide to – Wall Mounting & Fixings

Important note:

If plastic wall plugs are supplied with your product:

  • these are only suitable for use in masonry walls.
  • If you are in any doubt about the correct wall plugs for your wall, seek professional advice.
  • Failure of the product due to using incorrect fixings is the responsibility of the installer.
  • Important: When drilling into walls always check that there are no hidden wires or pipes etc.
  • Make sure that the screws and wall plugs being used are suitable for supporting your unit.
  • Consult a qualified tradesperson if you are unsure.

Hints:

  1. General rule: & Always use a larger screw and wall plug if you are not sure.
  2. Ensure you use the recommended drill bit to match the wall plug and hole size.
  3. Ensure you drill the hole horizontally, do not force the drill or enlarge the hole.
  4. Take extra care when drilling high walls, ceilings and ceramic tiles. Ensure wall plugs are inserted beyond the thickness of the ceramic tiles to avoid the tiles splitting or cracking.
  5. Ensure wall plugs are well fitted and are a tight fit in the drilled hole.

Types of walls

You can use one of the following types of wall plug if your walls are made of brick, breeze block, concrete, stone or wood. habitat-4010106-Cassidy-5
-Shelf-Shoe-Storage-Cabinet-FIG-16

  • Generally aerated blocks should not be used to support heavy loads, use a specialist fitting in this case. For light loads, general purpose wall plugs can be used.
  • For use with plasterboard partitions or hollow wooden doors.
  • For use with walls stuck with plasterboard. The hammer fixing allows it to be fixed to the wall rather than the plasterboard. Always check the fixing is secure to the retaining wall.
  • For use when attaching light loads on to plasterboard partitions.
  • For use when fitting or supporting heavy loads such as shelving, wall cabinets and coat racks.
  • For use with heavier loads such as lV & HiFi speakers and satelite dishes etc.
  • Safety : Always check the fitting and location to ensure your safety m and around the home.
  • Fitting: From time to time check the fitting to ensure the wall plugs or screws do not become loose.

Spare Parts

Documents / Resources

| habitat 4010106 Cassidy 5 Shelf Shoe Storage Cabinet [pdf] Instruction Manual
4010106 Cassidy 5 Shelf Shoe Storage Cabinet, 4010106, Cassidy 5 Shelf Shoe Storage Cabinet, Shoe Storage Cabinet, Storage Cabinet
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals