habitat 3415960 Nel Deep Oak Veneer Bookcase Instruction Manual
- June 9, 2024
- habitat
Table of Contents
3415960 Nel Deep Oak Veneer Bookcase
Instruction Manual
**** Safety and Care Advice
Product Details
Nel bookcase oak 3415960
Nel bookcase black 2158541
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
-
Keep children and animals away from the work area, small parts could choke if swallowed.
-
Make sure you have enough space to layout the parts before starting.
-
This product has been constructed to be used in the domestic environment only and not for commercial purposes.
-
Assemble the item as close to its final position(in the same room) as possible.
-
Assemble on a soft level surface to avoid damaging the unit or your floor.
-
We do not recommend the use of power drill/drivers for inserting screws as this could damage the unit.
Only use hand screwdrivers. -
Parts of the assembly will be easier with 2 people.
-
Dispose of all packaging carefully and responsibly.
Care and maintenance
- Only clean using a damp cloth and mild detergent. Do not use abrasive cleaners.
- Use a dry cloth to clean the product, furniture polish is not recommended.
- From time to time check that there are no loose screws, nuts or bolts. If there are please re-tighten.
- This product should not be discarded with household waste. Take to your local authority waste disposal centre.
Additional Guidance
- Assemble all parts and bolts loosely during assembly, only once the product is complete should you fully tighten the bolts.
- Regularly check and ensure that all bolts and fittings are tightend properly.
- Maximum loading weight 45kg/per layer.
- This product is compliant EN14749, BS4875-7.
- Any additional or replacement parts are obtained from the manufacturer.
Made in China for Habitat. Argos Limited, 489-499 Avebury Boulevard, Milton Keynes, MK9 2NW. Argos (N.I.) Ltd, Forestside Shopping Centre, Upper Galwally, Belfast, United Kingdom, BT8 6FX. Argos Distributors (Ireland) Limited, Unit 7, Ashbourne Retail Park, Ballybin Road, Ashbourne, County Meath, Ireland.
Fittings (Shown to scale)
Bag 1
Tools required
Panels
Warning!
Please do not fully tighten the bolts in this step.
Warning!
Fully tighten all the bolts.
STEP 1: Loose the screw to adjust the bracket position
STEP 2: Make a mark on the wall through the bracket
STEP 3: Drill a hole in the wall and insert the plug.
STEP 4: Fix the bracket to wall and tighten the screw on leg frame
WARNING!
IN ORDER TO PREVENT OVERTURNING THIS PRODUCT MUST BE USED WITH THE WALL
ATTACHMENT DEVICE PROVIDED
- WARNING: To prevent possible overbalancing this unit must be secured to a wall using the overbalance protector kit supplied.
- A unit that is allowed to topple can cause serious or fatal injury. In addition to wall fixing the unit, place heavy items on the lower shelves. do not put any heavy objects on top of the unit and never allow children to climb or hang on drawers, doors or shelves.
Assembly is complete.
A Guide to – Wall Mounting & Fixings
Important note:
If plastic wall plugs are supplied with your product:
– these are only suitable for use in masonry walls.
If you are in any doubt about the correct wall plugs for your wall, seek
professional advice.
Failure of the product due to using incorrect fixings is the responsibility of
the installer.
Important: When drilling into walls always check that there are no hidden
wires or pipes etc.
Make sure that the screws and wall plugs being used are suitable for
supporting your unit. Consult a qualified tradesperson if you are unsure.
Hints:
- General rule: **** Always use a larger screw and wall plug if you are not sure.
- Ensure you use the recommended drill bit to match the wall plug and hole size.
- Ensure you drill the hole horizontally, do not force the drill or enlarge the hole.
- Take extra care when drilling high walls, ceilings and ceramic tiles. Ensure wall plugs are inserted beyond the thickness of the ceramic tiles to avoid the tiles splitting or cracking.
- Ensure wall plugs are well fitted and are a tight fit in the drilled hole.
Types of walls
You can use one of the following types of wall plug if your walls are made of
brick, breeze block, concrete, stone or wood.
No.1 “General Purpose” wall plug
Generally aerated blocks should not be used to support heavy loads, use a
specialist fitting in this case. For light loads, general purpose wall plugs
can be used.
No.2 “Plasterboard” wall plug
For use when attaching light loads on to plasterboard partitions.
No.3 “Cavity Fixing” wall plug
For use with plasterboard partitions or hollow wooden doors.
No.4 “Cavity Fixing-Heavy Duty” wall plug
For use when fitting or supporting heavy loads such as shelving, wall cabinets
and coat racks.
No.5 “Hammer Fixing” wall plug
For use with walls stuck with plasterboard. The hammer fixing allows it to be
fixed to the wall rather than the plasterboard. Always check the fixing is
secure to the retaining wall.
No.6 “Shield Anchor” wall plug Heavy loads
For use with heavier loads such as TV & HiFi speakers and satelite dishes
etc.
**** Care & Maintenance
Safety: Always check the fitting and location to ensure your safety in and
around the home.
Fitting: From time to time check the fitting to ensure the wall plugs or
screws do not become loose.
Spare Parts
www.argos-support.co.uk
Help@ClickSpares.co.uk
0345 640 2020
Customer Support
0370 112 1928
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>