habitat Georgia Bistro Outdoor Dining Set with a Glass Top Table User Guide
- June 4, 2024
- habitat
Table of Contents
habitat Georgia Bistro Outdoor Dining Set with a Glass Top Table
Product Details
IMPORTANT, RETAIN FOR FUTURE REFERENCE
- Keep children and animals away from the work area, small parts could choke if swallowed.
- Make sure you have enough space to layout the parts before starting.
- This product has been constructed to be used in the domestic environment only and not for commercial purposes.
- Make sure you have enough space to layout the parts before starting.
- Assemble the item as close to its final position (in the same room) as possible.
- Assemble on a soft level surface to avoid damaging the unit or your floor.
- Remove all fittings from the plastic bags and separate them into their groups.
- Do not stand or put weight on the product during assembly, this could cause damage.
- We do not recommend the use of power drill/drivers for inserting screws as this could damage the unit.
- Only use hand screwdrivers.
- Parts of the assembly will be easier with 2 people.
- Dispose of all packaging carefully and responsibly.
Care and maintenance
- During assembly do not lay the glass directly onto hard or rough surfaces.
- We recommend laying the glass on a blanket or cardboard during assembly.
- You could even use the box.
- For tables that can be used outdoors, if your table has a parasol, make sure the edge of the parasol cut-out has a protector in place.
- In addition always use a weighted parasol base, and remove the parasol in windy conditions.
- Parasols can put pressure on the table top or even blow the table over in windy.
- Do not use furniture if any parts are missing or broken.
- Contact your retailer immediately.
- Do not drag rough or heavy objects over the top of the glass.
- Do not strike the glass with hard or pointed items, or use the glass as a chopping surface.
- When lifting or moving the product, ask for someone to lend a hand, trying to move a product on your own can lead to accidents.
- We recommend using place mats, weather. coasters and table cloths to help protect against scratches and accidentally dropped items.
- For tables that can be used.
- Do not place very hot or very cold items, such as saucepans or barbecues, directly on the glass surface.
- Extreme temperature differences over small areas can damage glass. outdoors it is advised that the table is kept covered when not in use to protect the glass from the weather and accidental damage.
- Clean the glass regularly to make Sure there are no grit on the top.
- Do not clean glass with washing powders or any other substances containing abrasives, since these substances can scratch glass.
- Do not sit or stand upon the glass surface.
Safety and Care Advice
Additional Guidance
Assemble all parts and bolts loosely during assembly, only once the product is
complete should you fully tighten the bolts. Regularly check and ensure that
all bolts and fittings are tightened properly. Do not fully tighten all screws
until assembly is completed. Make sure the assemble will be easier with 2
people.Only clean using a damp cloth and mild detergent, do not use bleach or
abrasive cleaners. .Make sure each screw matches the corresponding figure to
ensure correct assembly. From time to time check that there are no loose
screws on this chair. This product should not be discarded with household
waste. Take to your local authority waste disposal centre. This product is
compliant BS EN581-1; BS EN581-2; BS EN581-3.
Fittings
30mm Screw x 3
40mm Screw x 8
Washer x 11
Screw Cap x 11
Allen key x 1 Adjustable Screw knot Cap x5 assembled)
Foot Cap x 16 assembled
Components
Chair Seat x 2 (645 x 665 x 560mm) Chair Leg x 2 (600 x 560 x 385mm) Stool Seat x 2 (500 x 490 x 360mm) Table Top Frame (Diam460 x 205mm) Table Leg(Diam460 x 305mm) Seat Cushion x2 (520 x 505 x 50mm)
Back Cushion x2 (510 x 310 x 150mm)
Stool Cushion x2 (455x 445 x 50mm) Table Glass (Diam455 x 5mm)
How we fix it?
Chair Assembly
Chair assemble is completed.
Stool assenbly
Stool assembly is completed. 
NOTE
During assembly do not lay the glass directly on to hard or rough
surfaces. We recommend laying glass on blanket or cardboard during assembly.
You could even use the box.
Table assembly
NOTE
Be careful do not scratch the glass top during the assembling.
Table assembly is completed.