habitat 3121900 White Paper Origami Table Lamp Instruction Manual

June 1, 2024
habitat

habitat 3121900 White Paper Origami Table Lamp

habitat-3121900-White-Paper-Origami-Table-Lamp-PRODUCT

Specifications:

  • Product Name: Origami Table Lamp
  • Model Numbers: 3121900 (White), 4707426 (Yellow)
  • Usage: For household and indoor use only
  • Bulb Type: Max. 6W LED SES/E14 bulb

Product Usage Instructions

Safety Warning:
For household and indoor use only. Please read and retain these instructions for future reference.

Assembling:

  1. Switch off the mains power supply before assembling.
  2. Allow the lamp to cool down for at least 10 minutes before replacing the bulb.
  3. Do not touch the bulb directly with your fingers, use a cloth to cover it.
  4. Loosen and remove the old bulb from the lamp.
  5. Replace with a new bulb of the same voltage and wattage (Max. 6W LED SES/E14 bulb).

Maintenance:
Recycling electrical products is important for the environment.
Do not dispose of the lamp with normal household waste. Visit www.recycle- more.co.uk to find your nearest recycling site.

Contact Information:
If you have any comments or questions, contact Careline Habitat at 0345 640 2020 or visit Habitat.co.uk

Manufacturer Information:
Made in China for Habitat. Argos Limited, 489-499 Avebury Boulevard, Milton Keynes, MK9 2NW. Argos (N.l) Ltd, Forestside Shopping Centre, Upper Galwally, Belfast, United Kingdom, BT8 6FX.

FAQ:

Q: Can I use a bulb with higher wattage than recommended?
A: It is not recommended to use a bulb with wattage higher than the specified maximum (6W LED SES/E14 bulb) as it may damage the lamp.

Q: How do I clean the lamp?
A: Use a soft, dry cloth to clean the lamp. Avoid using liquids or abrasive materials that may damage the surface.

WHITE PAPER ORIGAMI TABLE LAMP 3121900
YELLOW PAPER ORIGAMI TABLE LAMP 4707426

Care & Instruction

For household and indoor use only.
Please read and retain these instructions for future reference

Safety Warning

Read these instructions carefully and familiarize yourself with the procedure before assembling the unit.

  • Take all the components and fittings out of the plastic bag and separate them into their groups.

  • Ensure you have enough space to lay out all the parts before assembly.
    Always be sure to use the correct type and wattage of bulbs as indicated on the fitting.
    Do not exceed the maximum stated wattage.

  • To avoid scratching it is recommended that you assemble the unit on a soft level surface.

  • When changing the bulb, always switch off at the mains and allow the old bulb to cool down before handling. Dispose of used bulbs carefully.

  • This luminaire is Class II insulated.

  • The luminaire is designed for INDOOR USE ONLY

  • The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged the luminaire shall be destroyed.

WARNING – This product is not intended for use by children. Children should be supervised to ensure that they do not play with the product.

Assembling

  1. Remove all protective materials from the package and place the lamp shade on a smooth surface.
  2. Put the lamp holder ○ A through bracket ○ B then screw on shade ring ○ C ,put the LED S ES/ E 14 bulb ○ D 6 W max) on the lamp holder (bulb not included).
  3. Insert the bracket ring into the transparent plastic buckle.
  4. Align and close the hook and loop fastener .
  5. Clamp the wire into the wire slot , then a lign and close the hook and loop fastener
  6. Once the installation is complete, insert the plug into the socket.

Bulb Replacement

  1. Switch off the mains power supply.
  2. Before replacing the bulb, allow it to cool down for at least 10 minutes.
  3. Never touch the bulb with your fingers directly, cover it with a cloth.
  4. Loosen the bulb and remove it from the lamp.
  5. Replace a new bulb with same voltage and wattage (Max.
  6. W LED S ES/ E 14 bulb)
    Maintenance

CAUTION!
Always disconnect power supply when servicing or cleaning.

  • This luminaire is designed for indoor use only.
  • Use a clean dry soft cloth.
  • Do not use abrasive cloths or polishes as this may cause damage to the product.

habitat-3121900-White-Paper-Origami-Table-Lamp-1

Recycling electrical products
You should now recycle your waste electrical goods and in doing so help the environment. This symbol means an electrical product should note be disposed of with normal household waste.
Please ensure it is taken to a suitable facility for disposal.

Visit www.recyclemore.co.uk, click on “bank locator” and enter your postcode to find your nearest recycling site.

We care about our quality and what you think, If you have any comments, good and bad, Please call our Careline Habitat: 0345 640 2020 or visit Habitat.co.uk Your statutory rights are not affected.

Made in China for Habitat. Argos Limited, 489-499 Avebury Boulevard,Milton Keynes,MK9 2NW. Argos (N.l) Ltd,Forestside Shopping Centre, Upper Galwally, Belfast, United Kingdom, BT8 6FX.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

habitat User Manuals

Related Manuals