habitat 1233670 Mushroom Table Lamp Instruction Manual
- October 30, 2023
- habitat
Table of Contents
MUSHROOM TABLE LAMP
1233670
Assembly and User Instructions – Please keep for future reference
Important –Please read these instructions fully before using If you need
help please call our
Customer Services on 0345 6400800
Parts and Components Listing
| A. | Pre-wired base x 1 |
|---|---|
| B. | Metal shade x 1 |
| C. | Shade support frame x 1 |
| D. | Shade ring x 1 |
| E. | Decorative nut x 1 |
Safety Information
IMPORTANT – Please read these instructions fully before installation and
keep for future reference
For your safety, this product must be installed in accordance with local
building regulations. If in any doubt, or where required by law, consult a
competent person who is registered with an electrical self-certification
scheme. Further information is available online or from your local authority.
IMPORTANT -This product has been designed for non-professional, domestic
use only.
IMPORTANT – Carefully unpack and examine the product for any damage. If
you think there is a defect, do not use the product and contact our customer
services on 0345 6400800.
IMPORTANT – Dispose of all packaging correctly and responsibly and in
accordance with all local laws and regulations. Never leave packaging
components within reach of children as they can be a source of danger.
IMPORTANT – Before inserting or replacing bulb(s) ensure the power is
switched off and the bulb(s) have cooled down.
WARNING – Do not modify or alter any product before or after
installation. This may render the product un-safe.
WARNING – This is a Class 2 product and does not require an earth
connection.
WARNING – Accessible parts become hot during use, young children must be
kept away.
WARNING – If replacing the fuse in the plug do not exceed the maximum
rated amps as specified on the plug.
WARNING – This product is not intended for use by persons (including
children) with reduced physical, sensory and mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or
instruction concerning use of the product by persons responsible for their
safety.
WARNING – Children should be supervised to ensure that they do not play
with the product.
WARNING – Do not place this fitting in a damp atmosphere.
WARNING – The luminaire should be positioned so that prolonged staring
into the luminaire at distance closer than 0.2m is not expected.
CAUTION – Ensure the power is switched off before cleaning or carrying
out any maintenance.
Maintenance
CAUTION! Always disconnect power supply when servicing or cleaning.
Cleaning
- Use a clean dry soft or slightly damp cloth.
- Do not use abrasive cloths or polishes as this may cause damage to the product.
Changing the bulbs
IMPORTANT! Ensure that the bulb has cooled down before replacing.
- Ensure that the power supply has been disconnected.
IMPORTANT!
If the external flexible cable or cord if this luminaire is damaged this
product must be destroyed.
Installation
IMPORTANT ! – Electrical connections must be carried out by a suitably
qualified person and in accordance with all relevant local building and
installation regulations. If in doubt consult a qualified electrician.
Installation
- Place the support shade frame onto the lamp holder section.
- Screw the shade ring onto the lamp holder to secure support frame inplace.
- Screw the bulb (not supplied) into the lamp holder, ensuring you do not exceed maximum bulb size Heigh:78mm , Diameter:45mm suitable for this product and the maximum wattage stated on the product.
- Place the metal shade over the top section of the support frame.
- Screw the decorative nut into the support frame to secure shade in placed
- Remove the pin plug cover and plug into a normal household socket.
- Using the in-line switch, turn on and test.
Replacement Lamp
Maximum wattage – See lamp holder Light bulb shape- See lamp holder
Customer Helpline 0345 6400800
Produced for Argos, UK – 489-499 Avebury Boulevard, Central Milton Keynes, MK9
2NW / Ireland – Unit 7,
Ashbourne Retail Park, Ballybin Road, Ashbourne , County Meath
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>