Habitat 326/0971 Elaina Storage Cabinet Instruction Manual
- June 9, 2024
- habitat
Table of Contents
Habitat 326/0971 Elaina Storage Cabinet
Safety and Care Advice
Product Details
Elaina Woven front Bookcase 1937361
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
- Keep children and animals away from the work area, small parts could choke if swallowed.
- Make sure you have enough space to lay out the parts before starting.
- This product has been constructed to be used in the domestic environment only and not for commercial purposes.
- Assemble the item as close to its final position (in the same room) as possible.
- Assemble on a soft level surface to avoid damaging the unit or your floor.
- We do not recommend the use of power drills/drivers for inserting screws as this could damage the unit. Only use hand screwdrivers.
- Parts of the assembly will be easier with 2 people.
- Dispose of all packaging carefully and responsibly.
Care and maintenance
- Only clean using a damp cloth and mild detergent. Do not use abrasive cleaners.
- Use a dry cloth to clean the product, furniture polish is not recommended.
- From time to time check that there are no loose screws, nuts or bolts. If there are please re-tighten.
- This product should not be discarded with household waste. Take to your local authority waste disposal center.
Additional Guidance
- Assemble all parts and bolts loosely during assembly, only once the product is complete should you fully tighten the bolts.
- Regularly check and ensure that all bolts and fittings are tightened properly.
- This product is compliant with EN 14749; BS4875-7.
Fittings Shown to scale
Bag 1
Bag 2 
Hardware
Tools required
Panels
INSTALLATION
- WARNING: To prevent possible overbalancing this unit must be secured to a wall using the overbalance protector kit supplied.
- A unit that is allowed to topple can cause serious or fatal injury. In addition to wall fixing the unit, place heavy items on the lower shelves, do not put any heavy objects on top of the unit, and never allow children to climb or hang on drawers, doors, or shelves.
IMPORTANT
On a regular basis please check that the screws and fittings have not become
loose as this could present a potential choke hazard.
Wall Mounting & Fixings
Important note:
If plastic wall plugs are supplied with your product:
- These are only suitable for use in masonry walls. If you are in any doubt about the correct wall plugs for your wal, seek professional advice. Failure of the product due to using incorrect fixings is the responsibility of the installer.
Important:
When drilling into walls always check that there are no hidden wires or pipes
etc.
Make sure that the screws and wall plugs being used are suitable for supporting your unit. Consult a qualified tradesperson if you are unsure.
Hints:
- General rule: & Always use a larger screw and wall plug if you are not sure.
- Ensure you use the recommended drill bit to match the wall plug and hole size.
- Ensure you drill the hole horizontally, do not force the drill or enlarge the hole.
- Take extra care when drilling high walls, ceilings, and ceramic tiles. Ensure wall plugs are inserted beyond the thickness of the ceramic tiles to avoid the tiles splitting or cracking.
- Ensure wall plugs are well fitted and are a tight fit in the drilled hole.
Types of walls
You can use one of the following types of wall plugs if your walls are made
of brick, breeze block, concrete, stone, or wood.
-
“General Purpose” wall plug
Generally, aerated blocks should not be used to support heavy loads, use a specialist fitting in this case. For light loads, general-purpose wall plugs can be used. -
“Plasterboard” wall plug
For use when attaching light loads onto plasterboard partitions. -
“Cavity Fixing” wall plug
For use with plasterboard partitions or hollow wooden doors. -
“Cavity Fixing-Heavy Duty” wall plug
For use when fitting or supporting heavy loads such as shelving, wall cabinets and coat racks. -
“Hammer Fixing” wall plug For use with walls stuck with plasterboard. The hammer fixing allows it to be fixed to the wall rather than the plasterboard. Always check the fixing is secure to the retaining wall.
-
“Shield Anchor” wall plug Heavy loads
For use with heavier loads such as TV & HiFi speakers and satellite dishes etc.
Care & Maintenance
Safety:
Always check the fitting and location to ensure your safety in and around the
home.
Fitting:
From time to time check the fitting to ensure the wall plugs or screws do not
become loose.
Spare Parts
- www.argos-support.co.uk.
- Help@ClickSpares.co.uk.
- 0370 112 1928
Customer Support
- 0345 640 2020
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>