SKG V3 Smart Band Watch User Guide

V3 Smart Band

User Guide

Product Summary

Prompts:
※To make heart rate measurement more accurate, please wear the bracelet on the wrist away from the carpal bone; Please wear it close to the skin but not too tight.
※The bracelet and watchband are made of healthy materials, and which can be worn safely. If you feel dis-comfortable during wearing it for personal differences, such as skin
discomfort, please stop wearing and consult your doctor.

1. Enter the mode to be paired
   When using the watch for the first time, long press the power button (side button) for 6 seconds, the watch will vibrate and the logo will appear. Then the watch will start up and enter the mode to be paired.

2. Download “Band V3” App
   Search for “Band V3” in the app market to download and install.

https://moyang-v3-us.skg.com/app-download/skg

3. Setting and Pairing
   Click the plus icon in band V3 to add the device. Select the SKG band V3 from a nearby device.

Main screen operation
Slide downward for rapid setting
Slide upward for the list of functional menu
Slide leftward, check the first small part
Press and hold for 2s for editing the watch face
Slide rightward, check the information

Press
Wake the watch up
Lighten the screen, turn the screen off
Go back to the previous screen
Press
Turn on, off

Recharging:
If you need to charge the bracelet, place the bracelet on the charging stand and make sure that the charging contact of the bracelet is aligned with the metal contact of the recharging base.
Prompts:
※If the bracelet hasn’t been used for a long time, the electricity quantity is used up, the watch needs a long time to start automatically;
※Before recharging, please clean up the bracelet’s contract point, to avoid residual sweat or water.

Replacement of the watch band
Toggle the switch and press it, you can remove or install the watch band.

Packing List

V3 smart band/recharging base/user’s guide

Product Parameters

Type: S9246LA
Bluetooth: Support BLE
Bluetooth frequency: 2402-2480 MHz
Bluetooth’s transmitting power: ≤10dBm(Max)
Equipment requirements: ios 11 and above or
Android 5.0 and above
Waterproof grade: IP68
Input: 5V ****0.09A
Working temperature: 0℃~45℃
Storage temperature: -10~50℃

Regulation Information

To view the relevant regulatory information, please go to set the regulatory information about the bracelet.

Medical Disclaimer

Warning: This product is not a medical device.
This Product and its related applications are not intended to diagnose, treat or prevent any disease or medical condition.
Always consult a medical professional before you adjust your exercise, sleep, or nutrition schedule.

Safety and Cautions

Before using and operating the device, please read and observe the following precautions to ensure the best performance of the device and avoid dangerous or illegal situations.
Routine use

• When the bracelet is actively used to measure the heart rate or blood oxygen, please keep the wrist rest.
• Waterproof grade of this product is IP68, you can wash your hands during wearing it, or wear it under the conditions of sweating, rain, dust, but it can’t be worn in situations of swimming, showering, sauna, and diving.
• The bracelet’s touch screen does not support underwater operation, after being touched with water, it’s surface shall be dried with a soft cloth before operation.
• Please avoid wearing tightly in daily use; Keep dry and clean at the contact area between the bracelet and skin, the bracelet shall be cleaned with water regularly. If there is
  redness and swelling at the contact position, please discontinue use it immediately and consult your doctor.

Electronic equipment
In the places where the use of wireless devices have been expressly forbidden, do not use this device, otherwise it will interfere with other electronic equipment or cause other
dangerous.

Safety of the battery

• Keep the recharging base and device being in a dry environment when recharging; Do not touch the recharging base with your hands. Do not immerse the recharging base with water or other liquids.
• Do not disassemble or modify the battery, insert foreign matter, or immerse the battery in water or other liquids to avoid battery leakage, overheating, fire, or explosion.
• Do not drop, squeeze, or puncture the battery. Do not expose the battery to excessive external pressure, which may cause internal short circuit and overheating.
• The device is equipped with a non-removable built-in battery. Do not replace the battery by yourself to avoid damage to the battery or the device. The battery can only be replaced by authorized service centers.
• Please dispose of the battery according to local instructions. Do not dispose of the battery as household garbage.

Repair and maintenance

• Before cleaning and maintaining the device, stop using of the device, close all applications, and disconnect all connections or cables from other devices. Use a clean, dry,
  soft cloth to wipe the device and its accessories. Do not use strong chemicals, cleaning agents or strong detergents to clean the equipment and its accessories.

• Do not touch magnetic stripe cards (such as bank cards and phone cards) with the device for a long time. Otherwise, the magnetic stripe cards may be damaged by magnetic fields.

Operating environment

• Please use the equipment in the temperature range of 0 ℃~45℃, and store the equipment and its accessories in the temperature range of -10℃~50℃. When the ambient temperature is too high or too low, the device may be faulty. When temperatures are below 5℃, battery performance may be limited.

Transportation safety

• Wireless devices may interfere with the flight system of the aircraft: Please comply with the relevant regulations of the airline and do not use this device where the use of wireless devices is prohibited

Access and Information Safety

Go to the “Band V3” App and click “Mine > Settings > About” Band V3 “to view the user agreement, privacy statement, etc.

Disclaimer

This product is not a medical device and should not be used as a substitute for professional medical judgment. It is not designed or intended for use in the diagnosis of disease or other conditions, or in the cure, mitigation, treatment, or prevention of any condition or disease. Please consult your healthcare provider prior to making any decisions related to your health.

EU Declaration of Conformity (DoC)

Hereby, SKG, declares that this device is in compliance with the essential requirements and other relevant provisions of Radio Equipment Directive 2014/53/EU. The declaration of conformity may be consulted at https://global.skg.com

Battery warning

The built-in lithium battery of the product is forbidden to be disassembled, impacted, extruded or put into fire. The battery under the very low air pressure may result in explosion or flammable liquid or gas leakage. Avoid the battery in a high-temperature environment or being exposed to strong sunlight to avert explosion. Don’t use the battery continuously in case of serious ballooning. The battery shall be handled pursuant to the local regulations and shall not be disposed as household garbage. Don’t try to repair, remove or refit the battery. The explosion may happen if the battery is replaced by the one subject to incorrect model. Don’t compress or puncture the battery with hard object. The battery leakage, overheating or outbreak of a fire may occur if the battery is destroyed.

Disposal and Recycling Information
This symbol (with or without a solid bar) on the device, batteries (included), and / or the packaging, indicates that the device and its electrical accessories (for example, a headset, adapter or cable) and batteries should not be disposed of as household garbage.

Warning

Thank you for purchasing SKG Products. If any manufacturinng defect problems occur within 12 months from the date of purchase, user can enjoy our our company’s warranty service.

Matters Needing Attention

1. When you buy the product, the sales unit will issue a valid proof of purchase.
2. The warranty card and the proof of purchase should be kept by the user properly, and it will not be replaced if lost.
3. If the product fails due to non-human factors, the user can present the warranty card and proof of purchase to the SKG customer service center for free maintenance during the warranty period.

To avoid the potential effects on the environment and human health as a result of the presence of hazardous substances in electrical and electronic equipment, end users of electrical and electronic equipment should understand the meaning of the crossed-out wheeled bin symbol. Do not dispose of WEEE as unsorted municipal waste and have to collect such WEEE separately.
Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances.

§ 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
§ 15.21 Information to user.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general FCC&IC RF exposure requirement. The device can be used in portable exposure condition without restriction.
Use only the supplied or an approved antenna.

This device was tested for typical body ‐worn operations. To comply with RF exposure requirements, a minimum separation distance of 0cm must be maintained between the user’s body and the handset, including the antenna. Third ‐party belt ‐clips, holsters, and similar accessories used by this device should not contain any metallic
components. Body ‐worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.
This device in compliance with the essential requirements and other relevant provisions of UKCA. All essential radio test suites have been carried out.

1. CAUTION : RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
2. The device complies with RF specifications when the device used at 0mm form your body.

IC Caution
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

References

• 抱歉，站点已暂停

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>