SKG V9 Smartwatch User Guide

SKG V9 Smartwatch

Product Overview

For the best heart rate measurement results, wear the watch away from your wrist bone and fit it comfortably on your wrist, but not too tightly.
The watch and strap are made of materials that are safe to wear, so you can wear the watch with confidence. If you have issues such as skin discomfort while wearing the watch, stop using it and contact a doctor.

INSTRUCTION

1. Enter Pairing Mode
   Press and hold the Function button (side button) for 6 seconds the first time you turn it on. The startup logo will appear on the screen and the watch will vibrate when it turns on to indicate it has entered pairing mode.

2. Download “SKG Watch V9” APP
   Search “SKG Watch V9′ in the APP Store, then download and install it to your phone.

3. Settings and Pairing
   Click the plus icon in the APP “SKG Watch V9″to add device. Select the SKG watch V9 from the device found to bind , or click the upper right corner to scan the QR code on your watch to bind.

Screen Actions

Swipe down to enter the quick settings page

Swipe up to view notifications

Swipe left to view the first widget

Swipe right to return to the previous page

Press and hold for 3 seconds to change the watch face

Holding Your Palm Over the Screen

Turn off screen

Press and Release

Wake up watch

Pause or resume workout

Go back to previous page

Open feature list

Press and Hold

Power on, power off or restart

Press and hold for 12 seconds, then release and the watch will forcely restart.

Charging
To charge the watch, place the watch on the charging base and make sure that the watch charging contacts are aligned with the metal contacts of the charging base.

Note:

• If the watch has not been used for a long time and the battery runs out, it needs to wait for a while before it can be again powered on.
• Before charging, please wipe away sweat or moisture residue to keep the charging contacts of the watch clean.

Changing the Strap
Toggle the switch to remove and attach the strap.

Parameter Information

• Product Name: V9 Smart Watch
• Product Model: S9246AA
• Bluetooth: Supports Bluetooth and Bluetooth Low Energy
• Bluetooth Frequency: 2402 – 2480 MHz
• Bluetooth Transmission Power: :s:10dBm
• Location : GPS/GLONASS/BeiDou/GALILEO/OZSS Device Requirements: iOS 11 or higher, or Android 5.1 or higher
• Water Resistance: IP68
• Power Input: SV :e: 0.SA
• Working Temperature Range: 0 C -45 C
• Storage Temperature Range: -10 C -SOC

In the Box

Smart watch/Charging Base/User manual

Regulatory Information

To view relevant regulatory information, go to Settings – About Watch – Regulatory Information

Safety Instructions

1. If you currently have any preexisting physical diseases, and using this product may have an impact on this disease, please consult your doctor first;
2. Do not check the display information when driving, being distracted or in other potentially dangerous situations;
3. This product is not a toy. Do not allow children or pets to play with this product. Small components of the product may cause suffocation;
4. The product function may be affected by external factors, so the data is for reference only;
5. The product has a heart rate recording function. Wearing it for a long time may cause some users to have skin discomfort and allergic symptoms, or bring certain risks to users with certain diseases. Please consult your doctor before using or stop using the product in any of the following situations:
6. Epilepsy or sensitive to light;
7. Poor blood circulation or prone to have bruises, heart disease or other diseases;
8. You are taking any light-sensitive drugs.

Disclaimer
This product is not a medical device and should not be used as a substitute for professional medical judgment. It is not designed or intended for use in the diagnosis of disease or other conditions, or in the cure, mitigation, treatment,
or prevention of any condition or disease. Please consult your healthcare provider prior to making any decisions related to your health.

EU Declaration of Conformity (DoC)
Hereby, 5KG, declares that this device is in compliance with the essential requirements and other relevant provisions of Radio Equipment Directive 2014/53/EU.
The declaration of conformity may be consulted at https://global.skg.com

Battery warning

The built-in lithium battery of the product is forbidden to be disassembled, impacted, extruded or put into fire. The battery under the very low air pressure may result in explosion or flammable liquid or gas leakage. Avoid the battery in a high-temperature environment or being exposed to strong sunlight to avert explosion. Don’t use the battery continuously in case of serious ballooning. The battery shall be handled pursuant to the local regulations and shall not be disposed as household garbage. Don’t try to repair, remove or refit the battery. The explosion may happen if the battery is replaced by the one subject to incorrect model. Don’t compress or puncture the battery with hard object. The battery leakage, overheating or outbreak of a fire may occur if the battery is destroyed.

Disposal and Recycling Information
This symbol (with or without a solid bar) on the device, batteries (included), and / or the packaging, indicates that the device and its electrical accessories (for example, a headset, adapter or cable) and batteries should not be disposed of as household garbage.

Warning
Thank you for purchasing SKG Products. If any manufacturinng defect problems occur within 12 months from the date of purchase, user can enjoy our our company’s warranty service.

Matters Needing Attention

1. When you buy the product, the sales unit will issue a valid proof of purchase.
2. The warranty card and the proof of purchase should be kept by the user properly, and it will not be replaced if lost.
3. If the product fails due to non-human factors, the user can present the warranty card and proof of purchase to the SKG customer service center for free maintenance during the warranty period.

Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycle valuable raw materials and the treatment
of toxic substances.
If you experience discomfort or skin irritation when wearing your smart watch, then we recommend you try cleaning your device. Sometimes residue or foreign materials build up around your device and may aggravate your skin. It’s also possible that you are not wearing the watch correctly. We recommend making sure to clean and adjust your watch regularly for a more comfortable fit.

Caution:

• If you experience skin irritation when wearing your watch, please refrain from wearing, and wait two to three days to see if your symptoms ease. If symptoms persist or worsen, please consult a physician.
• If you have eczema, allergies or asthma, you may be more likely to experience a skin irritation or allergy from a wearable device.

FCC

15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

15.21 Information to user.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
  The device has been evaluated to meet general FCC&IC RF exposure requirement. The device can be used in portable exposure condition without restriction.
  Use only the supplied or an approved antenna.

This device was tested for typical body – worn operations. To comply with RF exposure requirements, a minimum separation distance of 0cm must be maintained between the user’s body and the handset, including the antenna.
Third – party belt – clips, holsters, and similar accessories used by this device should not contain any metallic components. Body – worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.
This device in compliance with the essential requirements and other relevant provisions of UKCA. All essential radio test suites have been carried out.

1. CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
2. The device complies with RF specifications when the device used at 0mm form your body.

IC Caution
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>