belkin WIA004 Portable Wireless Charger Pad with MagSafe User Guide

June 9, 2024
belkin

belkin WIA004 Portable Wireless Charger Pad with MagSafe

REGULATORY AND SUSTAINABILITY INFORMATION
Portable Wireless Charger Pad with MagSafe
SKU/MODEL: WIA004

Regulatory and Sustainability Information
NORTH AMERICA

Safety Instructions

WARNING: Failure to follow these instructions could result in fire, electric shock, injury, or damage to the user, product, or other property.

  1. Connect the wall adapter of the wireless charger into a power outlet that is close by and is easy to disconnect from the source.
  2. Use indoors and in a dry location only; Avoid charging near sources of heat and humidity.
  3. Keep the wireless charger and wall adapter away from any liquids or moisture.
  4. Unplug the wireless charger when not in use for long periods of time.
  5. Do not store your device in very hot or very cold locations. It is recommended to use your device at room temperature.
  6. Do not use if visible defects are observed on the wireless charger or wall adapter.
  7. Do not attempt to service, modify, or disassemble the wireless charger or wall adapter.
  8. Use of a wall adapter not recommended or sold by Belkin may result in an increased risk of fire, electric shock, injury, or damage to the user, product, or other property.
  9. Keep this device out of reach of children to prevent them from playing with it.
    CAUTION: If you experience problems with the wireless charger, please discontinue use, unplug the wall adapter from the AC socket, and contact Belkin for assistance.
    The marking information is located on the bottom of the apparatus.

FCC Statement

DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY
We, Belkin International, Inc., of 12045 E. Waterfront Drive, Playa Vista, CA 90094, Tel: +1(310) 751 5100, declare under our sole responsibility that the product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Federal Communications Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the distance between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consulf fhe dealer or an experienced radio/ I V fechnician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Radiation Exposure Statement:
The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.

IMPORTANT NOTE:
Innovation, Science and Economic Development Canada Statement (ISED)
This device complies with RSS-216 of the Industry Canada Rules. Operation is subject to the following two conditions:

  1. This device may not cause interference, and
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

Radiation Exposure Statement:
The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.
This digital apparatus complies with CAN ICES-3(B) / NMB-3 (B).

EUROPE
Simplified EU Declaration of Conformity
Hereby, Belkin International, Inc., declares that the radio equipment is in compliance with Directive 2014/53/EU and RoHS Directive 2015/863. The full text of the EU declaration of conformity is available at the following Internet address: www.belkin.com/doc.
Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. Frequency band in which the radio equipment operates: 360 kHz
Maximum power transmitted: -5 dBuA/m

Electrical Static Discharge (ESD)
Under certain usage scenarios, ESD phenomenon may occurred and caused your iPhone to stop charging while on MagSafe. If this happen, simply unplug the power adapter to reset the system.

Waste Electrical and Electronic Equipment Directive
Disposal Information for User
Pursuant to and in accordance with Article 14 of the Directive 2012/19/EU of the European Parliament on waste in electrical and electronic equipment (WEEE).

UKCA Conformity:

  • Radio Equipment Regulations 2017 (S.I. 2017/1206)

The barred symbol of the rubbish bin shown on the equipment indicates that, at the end of its useful life, the product must be collected separately from other waste.
Therefore, any product that has reached the end of its useful life must be given to waste disposal centers specializing in separate collection of waste electrical and electronic equipment, or given back to the dealer when purchasing a new WEEE, pursuant to and in accordance with Article 14 as implemented in the country.
The adequate separate collection for the subsequent start-up of the equipment sent to be recycled, treated and disposed of in an environmentally compatible way contributes to preventing possible negative effects on the environment and health and optimizes the recycling and reuse of components making up the electronic equipment. Abusive disposal of the product by the user involves application of the administrative sanctions according to the laws in force.
For information on product disposal, please refer to http://www.belkin.com/uk /weee-regulations/

belkin-WIA004-Portable-Wireless-Charger-Pad-with-MagSafe-
FIG-3belkin-WIA004-Portable-Wireless-
Charger-Pad-with-MagSafe-FIG-4

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals