nedis WIFILS51CRGB 5 Meters Smart Wi-Fi LED Strip User Guide

: June 9, 2024
: nedis

Table of Contents

WIFILS51CRGB 5 Meters Smart Wi-Fi LED Strip
Specifications
Intended use
Safety instructions
Installing the app
Connecting the product
Setting up the product
Controlling the product
Declaration of Conformity
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Smart Wi-Fi LED strip
5 meters
WIFILS51CRGB

nedis WIFILS51CRGB 5 Meters Smart Wi-Fi LED Strip

WIFILS51CRGB 5 Meters Smart Wi-Fi LED Strip

nedis WIFILS51CRGB 5 Meters Smart Wi-Fi LED Strip - 1

Specifications

Product	Smart Wi-Fi LED Strip
Article number	WIFILS51CRGB

For more information see the extended manual online: ned.is/wifils51crgb

Intended use

This product is a Smart Wi-Fi LED strip with a wireless remote control.
The product is not intended for professional use.
This product is intended for indoor and outdoor use.
Any modification of the product may have consequences for safety, warranty and proper functioning.
Main parts (image A)

1 Power cable	8 LED strip
2 Controller	9 IR remote
3 Brightness buttons	10 Music mode
4 Power button	11 Speed buttons
5 Mode button	12 Colour buttons
6 Controller plug	13 Start/stop moving pattern
7 IR receiver

Safety instructions

WARNING

Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
Only use the product as described in this document.
Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
Do not drop the product and avoid bumping.
Do not expose the product to water or moisture.
This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
Do not unplug the product by pulling on the cable. Always grasp the plug and pull.
Only power the product with the voltage corresponding to the markings on the product.
Wipe the battery terminals with a clean dry cloth if they are dirty.
Non-rechargeable batteries are not to be recharged.
Do not short-circuit a battery.
Children of less than 8 years should be kept away.
Cleaning and user maintenance shall not be done by children without supervision.
Make sure to match the charger voltage to the voltage on the battery markings. Wrong voltage can destroy the charger and/or battery.
The security circuit ensures that there is no voltage at the battery clamps when there is no battery connected.
Make sure to match the (+) and (-) polarity markings.
Do not clean the inside of the product.

Installing the app

Download the Nedis Smartlife app for Android or iOS on your phone via Google Play or the Apple App Store.
Open the Nedis Smartlife app on your phone.
Create an account with your mobile phone number or your e-mail address and tap Continue.
Enter the received verification code.
Create a password and tap Done.
Tap Add Home to create a SmartLife Home.
Set your location, choose the rooms you want to connect with and tap Done.

Connecting the product

Plug the power cable A1 into the controller A2.
Plug the controller plug A6 into the LED strip A8.
Plug A1 into a power outlet.
Check if A8 is blinking. If so, confirm in the app.
If A8 does not blink, press and hold the power button A4 on A2 for 5 seconds.
Tap + in the top right corner.
Under Search Device, select the product from the list of available devices.
Check if A8 is blinking. If so, confirm in the app.
Enter the password of the Wi-Fi network to which your phone is connected and tap Confirm.
Rename the product after it has been found and added.

Setting up the product

1. Unplug A1 from the power outlet.
Clean the surface from dust and grease.
**** The surface must be smooth. Do not place the product on knitted/wool fabrics, dust wall, rough plastic surface or frosted glass.
Remove part of the 3M tape from the back of A8.
Place the start of A8 in the desired position.
Make sure the power outlet is within reach.
Unroll A8.
Remove the 3M tape and press A8 into the desired position.
Firmly press A8 down with your hand.
Do not use hard objects to press A8 down to prevent damage.
Do not bend A8 at sharp angles to prevent damage.
If desired, cut A8 to size on the indicated cut lines.
Cutting A8 removes the waterproof qualities of the product.
Plug A1 into a power outlet.

Controlling the product

Press A4 to switch the product on or off.
Press and hold A4 on A2 for 5 seconds to factory reset the product.
Press the mode button A5 to change modes.
Press the brightness buttons A3 to adjust the brightness.
Press the colour buttons Ae to adjust the colour.
Press the speed buttons Aw to adjust the speed.
**** The product can be connected to Google Home or Amazon Alexa to enable speech control.

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product WIFILS51CRGB from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via: nedis.com/wifils51crgb#support

Nedis BV
De Tweeling 28, 5215 MC ’s-Hertogenbosch
The Netherlands
08/22 nedis WIFILS51CRGB 5 Meters Smart Wi-Fi LED Strip - qr
code ned.is/wifils51crgb