aivituvin AIR 21 Wooden Tortoise House Instruction Manual

June 9, 2024
aivituvin

AIR 21 Wooden Tortoise House
Instruction Manualaivituvin AIR 21 Wooden Tortoise
House

AIR 21 Wooden Tortoise House

NOTICE
Please retain these instructions for future reference.

  • Firmly secure all bolts, screws and knobs before use.
  • Reconfirm that all bolts, screws, and knobs are secure every 90 days.
  • Fasten screws loosely during initial assembly. Do not fully tighten screws until the item is completely assembled.
  • Do not use or store this item in the proximity of open flame or flammable/combustible chemicals.
  • Be aware that some parts are heavy and have sharp edges.
  • Be aware that moving parts can injure, crush and cut.
  • If any parts are missing, broken, damaged, or worn, stop using this product until repairs are made and/or factory replacement parts are installed.
  • Do not use this item in a way inconsistent with the manufacturer’ s instructions as this could void the product warranty.

TOOLS REQUIRED

aivituvin AIR 21 Wooden Tortoise House - tool

HARDWARE

aivituvin AIR 21 Wooden Tortoise House - Figrue 1

PARTS

aivituvin AIR 21 Wooden Tortoise House - Figrue 2aivituvin AIR 21 Wooden Tortoise House - Figrue
3

PRODUCT ASSEMBLY

  1. Attach C , D , E to the front panel A by 5xP2 screws.
  2. Attach C , D , E to the back panel B by 5xP2 screws.
  3. Ensure all corners line up before screwing together.

aivituvin AIR 21 Wooden Tortoise House - Figrue 4

  1. Put in the “H” from the bottom.

  2. Screw “H” to the house from the bottom up by 4xP1 screws.
    aivituvin AIR 21 Wooden Tortoise House - Figrue 5

  3. Screw F, G to the house at the hinges by 8xP3 screws.

  4. Ensure F and G are line up before screwing.
    aivituvin AIR 21 Wooden Tortoise House - Figrue 6

Complete the roof by screwing the latch P4 by 8xP3 screws.

aivituvin AIR 21 Wooden Tortoise House - Figrue 7

  1. Rota the metal lamp holder firstly.
  2. Screw it to the cage using the P6 by 2xP3 on the upper part ; then screw the lower part using P7 by 3xP3.

aivituvin AIR 21 Wooden Tortoise House - Figrue 8

  1. Pls ignore the following for only one tortoise house owner!
  2. The below steps are the assembly for the 2nd tortoise house if you buying 2 houses.
    Take out the side panel Part C from one of the tortoise house.
    Take off the lamp holder and assemble it on the right side.

aivituvin AIR 21 Wooden Tortoise House - Figrue 9

Take out the side panel Part E from the other tortoise house.

aivituvin AIR 21 Wooden Tortoise House - Figrue 10

  1. Screw the connect pieces P5 by 4xP3 screws.
  2. Repeat on the other side.

aivituvin AIR 21 Wooden Tortoise House - Figrue 11

WARNING
Manufacturer and seller expressly disclaim any and all liability for personal injury, property damage or loss, whether direct, indirect, or incidental, resulting from the incorrect  attachment, improper use, inadequate maintenance, or neglect of this product.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

aivituvin User Manuals

Related Manuals