aivituvin SKY2609 47x47in Kids Large Wooden Sandbox for Backyard Instruction Manual
- June 9, 2024
- aivituvin
Table of Contents
aivituvin SKY2609 47x47in Kids Large Wooden Sandbox for Backyard
Instruction Manual
NOTICE
Please retain these instructions for future reference.
- Firmly secure all bolts, screws and knobs before use.
- Reconfirm that all bolts ,screws, and knobs are secure every 90 days.
- Fasten screws loosely during initial assembly. Do not fully tighten screws until the item is completely assembled.
- Do not use or store this item in the proximity of open flame or flammable/combustible chemicals.
- Be aware that some parts are heavy and have sharp edges.
- Be aware that moving parts can injure, crush and cut.
- If any parts are missing, broken, damaged ,or worn ,stop using this product until repairs are made and/or factory replacement parts are installed.
- Do not use this item in a way inconsistent with the manufacturer’ s instructions as this could void the product warranty.
TOOLS REQUIRED
-
PHILLIPS SCREWDRIVER
-
DRILL (RECOMMENDED)
-
2PERSON ASSEMBLY
-
APPROXIMATELY 30MIN. ASSEMBLY
HARDWARE
PARTS
CARTON 1/2
CARTON 2/2
PRODUCT ASSEMBLY
-
Pls line up the Part C & Part D as shown on the picture before attach the Part A & B to Part C & D by 8xP1. Screw the connector 2XP7 by 8XP8 screws
-
Put in bottom floor 2XPart E.
-
Screw the curtain Part G to the INSIDE of Part F by 3xP3 screws. Screw Part H to the INSIDE of Part F by 2xP2 screws.
-
Pls line up the Part C & Part D as shown on the picture before attach the Part F & I to Part C & D by 8xP1.
-
Screw the divider panel to the bottom panel by 1xP2 screw. Screw the connector P7 by 4XP8 screws on each one.
-
Attach 6pcs of plastic feet P6 by 12xP3 screws.
-
Screw the connector 3XP7 to the INSIDE of the roof by 4XP8 screws on each one. Screw the roof hinge to the back by 3xP4 screws on each one. Notice to level up before screwing together.
-
Screw the roof hinge P5, one side to the roof by 2xP4 screws, the other side to the left side panel by 2xP4 screws. Repeat on the other side.
-
Screw the waterproof strip Part L to the OUTSIDE of the roof by 8XP3 screws
-
Screw the connector 4XP7 by 16XP8 screws each side.
WARNING
Manufacturer and seller expressly disclaim any and all liability for personal
injury, property damage or loss ,whether direct, indirect, or incidental,
resulting from the incorrect attachment, improper use ,inadequate
maintenance, or neglect of this product.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>