aivituvin SKY2609 Wooden Cedar Sand Box w Seat Instruction Manual
- June 9, 2024
- aivituvin
Table of Contents
SKY2609 AIR 56
Wooden Cedar Sand Box w Seat
Instruction Manual
SKY2609 Wooden Cedar Sand Box w Seat
NOTICE
Please retain these instructions for future reference.
- Firmly secure all bolts, screws and knobs before use.
- Reconfirm that all bolts, screws, and knobs are secure every 90 days.
- Fasten screws loosely during initial assembly. Do not fully tighten screws until the item is completely assembled.
- Do not use or store this item in the proximity of open flame or flammable/combustible chemicals.
- Be aware that some parts are heavy and have sharp edges.
- Be aware that moving parts can injure, crush and cut.
- If any parts are missing, broken, damaged, or worn, stop using this product until repairs are made and/or factory replacement parts are installed.
- Do not use this item in a way inconsistent with the manufacturer’ s instructions as this could void the product warranty.
TOOLS REQUIRED
HARDWARE
PARTS
PRODUCT ASSEMBLY
-
Attach Part Q, Part P and Part O by 8xP4 screws.
-
Attach the top panel Part R by 4XP4 screws.
Repeat Step 1 &2 to complete the other small houses.
-
① Attach the left side panel Part D with Part E by 1XP1 screw.
② Attach the right side panel Part D with Part F by 1XP1 screw. -
①Attach Part C and Part Bx2 pieces to the side panel by 12XP2 screws.
② Screw Part B by 2XP1. -
Repeat Step 4 on the front view.
-
Repeat Step 4 on the front view.
-
Attached Part T by 8XP4 screws.
-
Attached Part S by 8XP4 screws.
-
Put in Part I.
-
Slide in the tray.
-
① Screw the Part M to Part J from the bottom by 3XP3 screws and then put it into the cage (Please kindly note the the side with metal farm should be OUTWARDS ).
② Screw Part N to Part J by 4XP5 screws. -
① Screw the Part M to Part J from the bottom by 3XP3 screws and then put it into the cage(Please kindly note the the side with metal farm should be INWARDS ).
② Then Screw Part N to Part J by 4XP5 screws. -
Put in the small house.
-
Put in Part K & Part I.
-
Screw Part N to Part K by 4XP5 screws.
-
Put in the other small house and the chewing toy, bowel.
-
Attached Part G by 4XP2 screws.
-
Screw the latch by 4XP5 screws on each side.
-
Repeat on the front view.
WARNING
Manufacturer and seller expressly disclaim any and all liability for personal
injury, property damage or loss, whether direct, indirect, or incidental,
resulting from the incorrect attachment, improper use, inadequate maintenance,
or neglect of this product.