aivituvin AIR 63 Rabbit Hutch Bunny Hutch Instruction Manual

June 9, 2024
aivituvin

aivituvin AIR 63 Rabbit Hutch Bunny Hutch

aivituvin-AIR 63-Rabbit-Hutch-Bunny Hutch

NOTICE
Please retain these instructions for future reference.

  • Firmly secure all bolts,screws and knobs before use.
  • Reconfirm that all bolts,screws,and knobs are secure every 90 days.
  • Fasten screws loosely during initial assembly. Do not fully tighten screws until the item is completely assembled.
  • Do not use or store this item in the proximity of open flame or flammable/combustible chemicals.
  • Be aware that some parts are heavy and have sharp edges.
  • Be aware that moving parts can injure,crush and cut.
  • If any parts are missing,broken,damaged,or worn,stop using this product until repairs are made and/or factory replacement parts are installed.
  • Do not use this item in a way inconsistent with the manufacturer’ s instructions as this could void the product warranty.

TOOLS REQUIRED

aivituvin-AIR 63-Rabbit-Hutch-Bunny Hutch-1

HARDWARE

aivituvin-AIR 63-Rabbit-Hutch-Bunny Hutch-2

PARTS

aivituvin-AIR 63-Rabbit-Hutch-Bunny Hutch-3

PRODUCT ASSEMBLY

  1. Screw the curtain Part B to the INSIDE of Part A by 3xP3 screws.aivituvin-AIR 63-Rabbit-Hutch-Bunny Hutch-4
  2. Screw Part C to the INSIDE of Part A by 2xP2 screw.
  3. Pls line up the Part D & Part E as shown on the picture before attach the Part F to Part E & D by 6xP1.aivituvin-AIR 63-Rabbit-Hutch-Bunny Hutch-6
  4. Put in bottom floor Part H and G.
  5. Pls line up the Part D & Part E as shown on the picture before attach the Part A to Part E & D by 6xP1.
  6. Screw the divider panel to the bottom panel by 1xP2 screw.aivituvin-AIR 63-Rabbit-Hutch-Bunny Hutch-8
  7. Attach the roof Part I ,screw the roof hinge to the back by 3xP4 screws on each one.
  8. Notice to level up before screwing together.
  9. Screw the roof hinge P5, one side to the roof by 2xP4 screws, the other side to the left side panel by 2xP4 screws.
  10. Repeat on the other side.aivituvin-AIR 63-Rabbit-Hutch-Bunny Hutch-10
  11. Attach 4pcs of plastic feet P6 by 8xP3 screws.
  12. Connect each panel with connecting piece 4xP7 by 16xP8 on each side.aivituvin-AIR 63-Rabbit-Hutch-Bunny Hutch-12

WARNING
Manufacturer and seller expressly disclaim any and all liability for personal injury,property damage or loss,whether direct,indirect,or incidental,resulting from the incorrect attachment,improper use,inadequate miantenance,or neglect of this product.

www.aivituvin.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

aivituvin User Manuals

Related Manuals