aivituvin AIR 79 Rabbit Hutch Indoor Bunny Cage Outdoor Instruction Manual
- June 9, 2024
- aivituvin
Table of Contents
aivituvin AIR 79 Rabbit Hutch Indoor Bunny Cage Outdoor
INSTRUCTION
NOTICE: Please retain these instructions for future reference.
- Firmly secure all bolts,screws and knobs before use.
- Reconfirm that all bolts,screws,and knobs are secure every 90 days.
- Fasten screws loosely during initial assembly. Do not fully tighten screws until the item is completely assembled.
- Do not use or store this item in the proximity of open flame or flammable/combustible chemicals.
- Be aware that some parts are heavy and have sharp edges.
- Be aware that moving parts can injure,crush and cut.
- If any parts are missing,broken,damaged,or worn,stop using this product until repairs are made and/or factory replacement parts are installed.
- Do not use this item in a way inconsistent with the manufacturer’ s instructions as this could void the product warranty.
TOOLS REQUIRED
HARDWARE
PARTS
PRODUCT ASSEMBLY
- Attach the back panel Part A to side panel Part B & C by 4XP1 bolts.
- Attach the tray support bar Part D by 4XP1 bolts.
- Attach the wire floor Part E by 4XP1 bolts.
- Attach the front panel Part F by 4xP1 bolts.
- Attach 4 casters Part G & H to the cage.
- Put in the mat Part I, and slide in the plastic tray Part J.
- Attach the roof support bar Part L to roof Part K by 4XP1 bolts.
- Attach the roof by 2XP1 bolts each side.
Please use a screwdriver or wrench to tighten all the bolts !
WARNING: Manufacturer and seller expressly disclaim any and all liability for personal injury,property damage or loss,whether direct,indirect,or incidental,resulting from the incorrect attachment,improper use,inadequate miantenance,or neglect of this product.
References
Read User Manual Online (PDF format)
Loading......