aivituvin AIR 26 Rabbit Hutch Indoor Bunny Cage Outdoor Instruction Manual
- June 8, 2024
- aivituvin
Table of Contents
aivituvin AIR 26 Rabbit Hutch Indoor Bunny Cage Outdoor
NOTICE
Please retain these instructions for future reference.
- Firmly secure all bolts,screws and knobs before use.
- Reconfirm that all bolts,screws,and knobs are secure every 90 days.
- Fasten screws loosely during initial assembly. Do not fully tighten screws until the item is completely assembled.
- Do not use or store this item in the proximity of open flame or flammable/combustible chemicals.
- Be aware that some parts are heavy and have sharp edges.
- Be aware that moving parts can injure,crush and cut.
- If any parts are missing,broken,damaged,or worn,stop using this product until repairs are made and/or factory replacement parts are installed.
- Do not use this item in a way inconsistent with the manufacturer’ s instructions as this could void the product warranty.
TOOLS REQUIRED
HARDWARE
PARTS
PRODUCT ASSEMBLY
- Attach the front panel Part K,the roof panel Part L to the side panels Part J by 10xP2 to finish the small house.
- Repeat the same way for the second one.
- Screw the ramp Part I to the layer Part G by 2xP4.
- Complete the two sessaws by 2xP2 each.
- Attach the side panels Part C & D to the front panel Part A by 4xP1.
- Notice to align with the dowels.
- Attach the back panels Part B to the side panels by 4xP1.
- Notice to align with the dowels.
- Attach the back panels Part B to the side panels by 4xP1.
- Notice to align with the dowels.
- Slide in the tray Part E.
- Put the down layer to the slot of back & side panel.
- Put the upper layer to the slot of back & side panel.
- Put the small houses to the layers.
- Put the seesaw into the cage.
- Put the chewing toy P6 and bowl Part O & P into the cage.
- Attach the roof Part F to the back panel by 6xP3.
- Attach the hook eye to left side panel.
- Tie the rope to the eye hook.
HELP CENTER
Question about your product? we’re here to help contact us via
service@aivituvin.com
THANK YOU
Thanks for your support to Aivituvin.
Your satisfaction is our #1 priority.
Once the items are received, opened, and deemed to be faulty or other
problems.
Pls contact us at service@aivituvin.com for
the solution.
We will feedback to you within 24 hours.
If you are happy with the shopping ,welcome to share photos and thoughts with
others .
WARNING
Manufacturer and seller expressly disclaim any and all liability for personal
injury,property damage or loss,whether direct,indirect,or incidental,resulting
from the incorrect attachment,improper use,inadequate miantenance,or neglect
of this product.
www.aivituvin.com