aivituvin AIR 65 Morgete Wooden Rabbit Hutch Instruction Manual

June 9, 2024
aivituvin

AIR 65 Morgete Wooden Rabbit Hutch
Instruction Manualaivituvin AIR 65 Morgete Wooden Rabbit
Hutch INSTRUCTION
MANUAL AIR 65
www.aivituvin.com 

AIR 65 Morgete Wooden Rabbit Hutch

NOTICE
Please retain these instructions for future reference.

  • Firmly secure all bolts,screws and knobs before use.
  • Reconfirm that all bolts,screws,and knobs are secure every 90 days.
  • Fasten screws loosely during initial assembly. Do not fully tighten screws until the item is completely assembled.
  • Do not use or store this item in the proximity of open flame or flammable/combustible chemicals.
  • Be aware that some parts are heavy and have sharp edges.
  • Be aware that moving parts can injure,crush and cut.
  • If any parts are missing,broken,damaged,or worn,stop using this product until repairs are made and/or factory replacement parts are installed.
  • Do not use this item in a way inconsistent with the manufacturer’s instructions as this could void the product warranty.

TOOLS REQUIRED

aivituvin AIR 65 Morgete Wooden Rabbit Hutch - fig 1

HARDWARE

aivituvin AIR 65 Morgete Wooden Rabbit Hutch - fig 2

PARTS

aivituvin AIR 65 Morgete Wooden Rabbit Hutch - fig 3 aivituvin AIR 65 Morgete Wooden Rabbit Hutch - fig
4

PRODUCT ASSEMBLY

  1. Attach the panel part A,B,C,D,E,S by 16XP2 screws.aivituvin AIR 65 Morgete Wooden Rabbit Hutch - fig 5

  2. Attach the casters without brakes 2Xpart R in front and the casters with brakes 2Xpart Q in back.aivituvin AIR 65 Morgete Wooden Rabbit Hutch - fig 6

  3. Slide in the tray part F & G.
    Attach the wire pen part H to the left side of hutch by 4XP1 screws.aivituvin AIR 65 Morgete Wooden Rabbit Hutch - fig
7

  4. Attach the wire pen part H & J to the right side of hutch by 4XP1 screws.(Please pay attention the position of part J)
    Attach the ramp support part I to the part J by 2XP1 screws.aivituvin AIR 65
Morgete Wooden Rabbit Hutch - fig 8

  5. Screw the ramp part K to the right side panel by 4XP5 screws.aivituvin AIR 65 Morgete Wooden Rabbit Hutch - fig 9

  6. Attach the 2Xpart R to the front of part L.
    Attach the 2Xpart Q to the back of part L.aivituvin AIR 65 Morgete Wooden
Rabbit Hutch - fig 10

  7. Attach the side wire pen part L by 4XP2 screws each side.

  8. aivituvin AIR 65 Morgete Wooden Rabbit Hutch - fig 11Attach the roof of pen part M by 4XP6 screws each side.
    aivituvin AIR 65 Morgete Wooden Rabbit Hutch - fig 12

  9. Slide in the tray part N.aivituvin AIR 65 Morgete Wooden Rabbit Hutch - fig 13

  10. Attach the roof of hutch part O by 8XP3 screws.aivituvin AIR 65 Morgete Wooden Rabbit Hutch - fig 14

  11. Attach the roof cap part P by 4XP4 screws.aivituvin AIR 65 Morgete Wooden Rabbit Hutch - fig 15

  12. Attach top panel of pen and side panel with 1XP7 by 4XP5 each side.aivituvin AIR 65 Morgete Wooden Rabbit Hutch - fig 16

WARNING
Manufacturer and seller expressly disclaim any and all liability for personal injury,property damage or loss,whether direct,indirect,or incidental,resulting from the incorrect attachment,improper use,inadequate miantenance,or neglect of this product.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

aivituvin User Manuals

Related Manuals