ALPHACOOL 7900XTX Eisblock Aurora Acryl Reference Instruction Manual
- June 9, 2024
- ALPHACOOL
Table of Contents
7900XTX Eisblock Aurora Acryl Reference
Instruction Manual Alphacool
Eisblock Aurora Acryl RX 7900XTX Reference
with Backplate
7900XTX Eisblock Aurora Acryl Reference
Safety instructionshttps://www.alphacool.com/m/?acg=1021
Digital guide
https://www.alphacool.com/m/safety.pdf
Accessories
Ceck compatibility and prepare graphics card
Ceck compatibility
Before starting the cooler assembly, compare your card with the pictures in
our configurator. To do so, visit https://www.hwconfig.com and search for
your graphics card or cooler model. For a definitiv identification, you can
also compare the PCB number. The cooler was designed for a special PCB layout.
Occasionally, graphics card manufacturers may revise the design of their card
slightly, causing the cooler not to fit on later models. During assembly,
please make sure taller parts have enough space around them and that the
cooler does not damage your graphics card.
Alphacool International GmbH is not liable for assembly errors occurring due
to negligence, such as selecting an incompatible cooler.
Prepare graphics card
Put the hardware on an antistatic mat. Begin dismantling the original cooler.
Depending on the structure of the cooler, remove the screws at the back of the
card and carefully unhook the fan connector first. If the original cooler uses
thermal glue, extreme care should be taken as you can easily damage parts.
Pick up all the items carefully. Next, clean the hardware of thermal paste or
pad residues with a solvent (e.g. isopropanol alcohol).
Place thermal pads on cooling block
Mount PCI bracket Use the screws
supplied in the accessories (1) and the original screws of the graphics card
(2).
Apply Thermal Grease ![ALPHACOOL 7900XTX Eisblock Aurora Acryl Reference
- fig 5](https://manuals.plus/wp-content/uploads/2023/02/ALPHACOOL-7900XTX- Eisblock-Aurora-Acryl-Reference-fig-5.png)
Install PCB
Place thermal pads on PCB backside
Mount backplate
Connect ARGB lighting
Screw in screw plugs with the tool
Alphacool International GmbH
Marienberger Str. 1
D-38122 Braunschweig
Germany
Support: +49 (0) 531 28874-0
Fax: +49 (0) 531 28874 – 22
E-Mail: info@alphacool.com
https://www.alphacool.com
We care!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>