beper P202ASP100 Rechargeable Vacuum Cleaner User Manual
- June 9, 2024
- beper
Table of Contents
beper P202ASP100 Rechargeable Vacuum Cleaner
Precautions
Read the following instructions carefully, since they give you useful safety information about installation, use and maintenance and help you avoid mishaps and possible accidents. Remove the packing and make sure that the appliance is intact, with special attention to the supply cable. The elements of the packing (plastic bags, polystyrene, etc) do not have to be accessible to the children, in order to preserve them from danger sources. It is recommended not to throw these packing material in the domestic waste, but to deliver them to the appropriate station of collection or destruction refusals, asking eventually information to the manager of the Sanitation Department of your own municipality. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Before connecting the appliance make sure that the mains voltage corresponds to the data specified on the label. The appliance can be damaged if the voltage is not correct. If the plug does not suit the socket, let it be replaced with another suitable plug by qualified personnel only, which shall also ensure that the section of the socket cables is suitable for your appliance power absorption. Generally, the use adaptors multiple plugs and/or extensions is not recommended; should they be necessary, please use only simple or multiple adaptors and extensions in compliance with the safety rules in force, making sure that the capacity absorption limit marked on the simple adaptors and the extensions and the maximum power limit marked on the multiple adaptor are not exceeded. Do not use the appliance if the cable or the plug shows any damages. Do not use the appliance after a possible irregular working. In this case, switch it off and do not break it open. Refer to an authorized Beper after-sale service for repair and require original spare parts only. Failing to follow these instructions may impair the safety of your appliance. This appliance is to be destined to its special purpose only. Any other use is to be considered as improper and thus dangerous. The manufacturer cannot be responsible for any damages deriving from improper, wrong or incautious use. This appliance is for household use only. To protect against electric shock, do not immerse cord, plug or any parts of the appliance into water or other fluids. Do not use the appliance near explosives, highly flammable materials, gases or burning flames.Do not allow children, disabled people or every people without experience or technical ability to use the appliance if they are not properly watched over. Close supervision is necessary when any appliance used by or near children.
Battery Safety
- This product includes lithium batteries, do not expose to high temperatures, as they may explode.
- Use the original batteries. Using different batteries may cause danger.
- The battery is prohibited to be disassembled, hit, squeeze or thrown into the fire. If severe bulging occurs, stop using it.
- To avoid liquid leakage, do not disassemble or collide the battery.
- Shorting the battery terminals may cause burns or fire.
- When dispose of the product, remove the batteries and dispose of them safely.
Some warnings
This appliance can be used to vacuum only dry materials, it is not waterproof. Do not use it to vacuum liquids or wet dust. Do not use the product to vacuum hot dust or ash. Use the product as indicated on the manual. Do not use this product on concrete, asphalt or other rough surfaces. This appliance is for household use. Do not use to vacuum masonry dust and/or cement dust. Do not use or leave the product in too hot or too cool spaces, it is suggested to leave the product in environments from 0 to 40°C. Do not leave the product in sun light for too long.
Product Description
- Battery pack
- Battery release button
- Handle
- ON/OFF switch
- Speed switch button
- Battery level indicator
- Motor
- Metal tube release button
- Metal tube
- Motorized brush release button
- Motorized brush
- Metal tube bending button
- Dust tank
- Filter
- Tank opener button
- Handle release button
- Nozzle with brushes
- Crevice nozzle
- Battery charger
- Wall support
Wall support installation
The product is equipped with a wall support and relative fixing kit. The support only helps to keep the appliance sturdy when the tube and the brush are inserted. The appliance will not be attached to the support but only supported. Be sure to install the wall mount so that the brush rests on the floor. Ricarica della batteria
Caution: before using the product, the battery has to be fully charged. Do not turn on the product during charging.
- Before a new charge, discharge completely the battery. The charging adapter and the top of the appliance may become hot during the charge: that is normal.
- Once a single line of the battery level indicator flashes, turn off the product and connect the electric plug of the battery charger to a power outlet and the plug into the socket on the side of the battery.
- The three charging lines will light up in sequence and the red light placed near the plug connection on the battery will flash.
- At the end of the recharge, the three lines will all be illuminated and the light near the attack will be blue and not flashing.
- Full recharge in 4 hours – 25 minutes working time in high speed – 35 minutes working time in low speed.
- The battery can be recharged either attached to the handle or detached from it. To detach the battery from the handle, press the battery release button and remove it (Fig.B).
- To reposition the battery under the handle, insert the battery into the grooves until you hear a click.
- The appliance works in two different ways
- As a stick vacuum cleaner simply using the tube and its accessories
- As a handheld vacuum cleaner simply using the accessories without the tube
Instructions for use
- Connect the handle to the dust tank by aligning the arrow ↓ placed on the lower part of the motor, to the symbol and by holding the tank turn the handle clockwise until you hear a click and the arrow ↓ is aligned to the symbol .
- Connect the metallic tube (or the chosen accessory) to the dust tank until you hear a click (Fig.C).
- To insert the motorized brush, connect it to the metallic tube or directly to the dust tank (Fig.D).
- The motorized brush is suitable for cleaning any type of surface and carpets with short and medium bristles.
- It is possible to connect the nozzle with brushes and the crevice nozzle to the dust tank or the metallic tube (Fig.E).
- The nozzle with brushes can be used to clean surfaces and worktops, but also sofas and fabrics.
- The crevice nozzle is suitable for cleaning corners, cracks or areas hard to reach.
- To disconnect the metallic tube or the accessories press the metal tube release button.
- To turn on the appliance press the switch, to turn it off press the switch again.
- With the +/- button placed on the handle is possible to regulate the speed.
- Warning: immediately turn off the product if something gets stuck inside the suction accessory.
Cleaning
- Do not use water, solvents or polishes to clean the exterior of the product, only use a dry cloth. Make sure that no liquid enters the appliance. Do not immerse the product in water and do not clean it in dishwasher.
- Caution clean the dust tank and the filter after each use; the suction power will be reduced if the tank is full and / or the filter is clogged.
- To empty the dust tank press the opener button, to close it replace the lid until you hear a click (Fig.F).
- Press the handle release button to disconnect it from the dust tank and rotate the tank clockwise until the arrow ↓ is aligned to the symbol and extract it (Fig.G).
- Remove the tissue filter and the filter cover (Fig.H) and wash them in water. Let them completely dry at the air before reassembling them. The tissue filter must be repositioned with the tab facing up.
- Be sure the filter and all parts are well positioned before reconnecting the dust tank to the main body.
How to clean the motorized brush
Caution: clean the brush only after removing it from the appliance.
Turn the brush upside down to have the bristles facing up, push the lever on the left of the brush downwards, moving it towards the symbol . In this way the cylinder with the bristles is raised and it is possible to remove it. Wash it with water and allow to dry completely. To reinsert the cylinder, insert the round end into the right side of the brush and press the left side down until you hear a click.
Technical data
- Lithium battery 22,2V, 2200mAh
Power supply
- INPUT: 100-240V ~ 50/60 Hz 0.3A
- OUTPUT: 27V – 0.5A
For any improvement reasons, Beper reserves the right to modify or improve the product without any notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance, it must be separately collected.
GUARANTEE CERTIFICATE
This appliance has been checked in the factory. From the date of original purchase a 24 month guarantee applies to material and production defects. The purchase receipt and the guarantee certificate must be submitted together in case of claim to guarantee. The guarantee is valid only with a guaranty certificate and proof of purchase (fiscal receipt) indicating the date of purchase and the model of the appliance For any technical assistance, please contact directly the seller or our head office in order to preserve the appliance’s efficiency and NOT TO void the guarantee. Any intervention on this appliance by non-authorized persons will automatically void the guarantee.
GUARANTEE CONDITIONS
If the appliance shows defects as a result of faulty material and/or production during the period of guarantee, we guarantee repair free of charge on condition that:
- The appliance has been used properly and for the purpose for which it has been intended.
- The appliance has not been tampered with, otherwise it is not maintainable.
- The purchase receipt shall be presented.
- The appliance showing a fair wear and tear shall not be covered by this guarantee.
Therefore, any part that could be accidentally broken or having visible signs of use in consumable products (such as lamps, batteries, heating elements…) the aesthetic parts are excluded from the guarantee, and any defect whatsoever resulting from non-respect of the rules for use, negligence in usage and/or maintenance of the appliance, carelessness, wrong or improper installation, damage during transport and any other damage not attributable the supplier. For every defect that could not be repaired within the guarantee period, the appliance will be replaced free of charge. In any case, if the part to be replaced for defect, breakage or malfunction is an accessory and/or a detachable part of the product, Beper reserves the right to replace only the very part in question and not the entire product Contact your distributor in your country or after sales department Beper.
E-mail: assistenza@beper.com which will forward your enquiries to your distributor.
BEPER SRL
- Via Salieri, 30 – 37050 – Vallese di Oppeano – Verona
- Tel: 045/7134674
- Fax: 045/6984019
- beper.com
CUSTOMER CARE BEPER
Documents / Resources
|
beper P202ASP100 Rechargeable Vacuum
Cleaner
[pdf] User Manual
P202ASP100, Rechargeable Vacuum Cleaner, Vacuum Cleaner, Rechargeable Cleaner,
Cleaner, P202ASP100 Vacuum Cleaner
---|---