TECNO Spark 8 Pro Smartphone User Manual

June 9, 2024
TECNO

TECNO logo Spark 8 Pro Smartphone
User Manual

Spark 8 Pro Smartphone

Mobile Phone
Model :KG8
Hereby, TECNO MOBILE LIMITED declares that this Mobile Phone is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.

Know your phone

TECNO Spark 8 Pro Smartphone - Figure 1

  1. Front camera
  2. Volume + key
  3. Volume – key
  4. Power key & side fingerprint sensor

SIM/SD card installation

  1. Power off mobile.
  2. Refer to the following picture for SIM / SD card installation.

TECNO Spark 8 Pro Smartphone - Figure 2 Charging the phone
You can charge your device using a charger or by connecting it to the computer using a USB cable (comes with the phone).
Use only TECNO Mobile charger and cables.
Other chargers or cables may damage the device. This will invalidate your phone warranty.

This device may be restricted for use, depending on the local network.
Restrictions in the 5GHz band:
According to 10(10) of Directive 2014/53/EU, the packaging shows that this radio equipment will be subject to some restrictions when placed on the market in Belgium  (BE), Bulgaria (BG), Czech Republic (CZ), Denmark (DK), Germany (DE), Estonia (EE), Ireland (IE), Greece (EL), Spain (ES), France (FR), Croatia (HR), Italy (IT), Cyprus (CY), Latvia (LV), Lithuania (LT), Luxembourg (LU), Hungary (HU), Malta (MT), Netherlands (NL), Austria (AT), Poland (PL), Portugal (PT), Romania (RO), Slovenia (SI), Slovakia (SK), Finland (FI), Sweden (SE), Norway (NO), Iceland (IS), Liechtenstein (LI), Switzerland (CH) and Turkey (TR).
The WLAN function for this device is restricted to indoor use due to its operation in the 5.15 to 5.35 GHz frequency range.

Operating Frequency (RF):

E-GSM900: 880-915MHz (TX), 925-960MHz (RX);
DCS1800: 1710-1785 MHz (TX), 1805-1880 MHz (RX);
WCDMA BAND I:1920-1980 MHz (TX), 2110-2170 MHz (RX);
WCDMA BAND VIII: 880-915MHz (TX), 925-960MHz (RX);
LTE BAND 1:1920-1980MHz(TX),2110-2170MHz(RX);
LTE BAND 3:1710-1785MHz(TX),1805-1880MHz(RX);
LTE BAND 7:2500-2570MHz(TX),2620-2690MHz(RX);
LTE BAND 8:880-915MHz(TX),925-960MHz(RX);
LTE BAND 20:832-862MHz(TX),791-821MHz(RX);
LTE BAND28: 703-733MHz (TX), 758-788MHz (RX);
LTE Band 38: 2570 -2620 MHz(TX),
2570-2620MHz(RX);
LTE Band 40: 2300-2400 MHz(TX), 2300 -2400 MHz(RX);
BT: 2402-2480 MHz (TX/RX);
Wi-Fi (2.4G): 2412-2472 MHz (TX/RX);
Wi-Fi (5G):
Band 1: 5150-5250 MHz(TX/RX);
Band 2: 5250-5350 MHz(TX/RX);
Band 3: 5470-5725 MHz(TX/RX);
Band 4: 5725-5875 MHz (TX/RX);
GPS:1.57542GHz(RX)
FM:87.5-108 MHz(RX)
Modulation mode:
GMSK, 8PSK (GSM)
BPSK, QPSK, 16-QAM (WCDMA)
QPSK, 16-QAM, 64-QAM (LTE)
GFSK, π/4-DQPSK, 8DPSK (BT) GFSK (BLE)
BPSK/QPSK/16QAM/64QAM/DSSS/OFDM/ CCK (WIFI b/g/n)
IEEE 802.11a/n: OFDM (BPSK / QPSK / 16QAM /64QAM)
BPSK (GPS)
FM(FM)
RF output power:
GSM900:33dBm±2dB
DSC1800:30dBm±2dB
WCDMA BAND I/VIII:24dBm+1.7dB/-3.7dB
LTE BAND1/3/7/8/20/28/38/40:23dBm+2.7dB/-2.7dB
Bluetooth:0-10 dBm
Wi-Fi:14dBm +/-3dB
Specific Absorption Rate (SAR) Certification
THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO WAVES

Body parts Test value Test distance Limit
Head 1.263W/Kg 10g 0cm 2.0 W/Kg 10g
Body 1.442W/Kg 10g 0.5cm 2.0 W/Kg 10g

This device complies with the ETSI TS 122 268 standard or the national and international standards that replace this standard and the technical specifications in these standards.

AT BE CY CZ DK EE Fl DE GR
HU IE IT LV LT LU MT NL PL
PT SK SI ES SE GB IS LI NO
CH BG RO TR

This device complies with the technical specifications of ETSI TS.123.038.V8.0.0 (or later version code) and ETSI TS.123.040V8.1.0 (or later version code) including all Turkish characters.
CAUTION:

  1. Use careful with the earphone maybe excessive sound pressure from earphones and headphones can cause hearing loss.

  2. Risk of explosion if battery is replaced by an incorrect type, dispose of used batteries according to the instructions.
    – disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
    – leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;
    – a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

  3. The product shall only be connected to a USB interface of version USB 2.0.

  4. Adapter shall be installed near the equipment and shall be easily accessible.

  5. EUT Temperature: 0~+40 ℃ (with adapter).

  6. Adapter1: U330TEA
    Input: 100-240V~50/60Hz 1.5A
    Output: DC 5.0V 3.0A 15.0W or 10.0V 3.3A 33.0W MAX
    Adapter2: U330TKA
    Input: 100-240V~50/60Hz 1.5A
    Output: DC 5.0V 3.0A 15.0W or 10.0V 3.3A 33.0W MAX

  7. The device complies with RF specifications when the device used at 5 mm from your body, and the holder must not be of metal composition.

  8. To prevent possible hearing damage, do not listen at high volume levels for long periods.

  9. Earphone and USB cable are shielded.

TECNO Spark 8 Pro Smartphone - Figure 4TECNO
logoHiOS runs on Android™ OS.
Android is a trademark of google LLC.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals