TECNO KJ6 SPARK 20 Pro 256GB 2 SIM Moonlit Black User Manual

TECNO KJ6 SPARK 20 Pro 256GB 2 SIM Moonlit Black

Product Specifications

• Model: KJ6
• Operating System: HiOS (Android OS)
• Features: Fingerprint sensor, NFC, Front camera, Volume keys, Power key
• SAR Value: 0.745 W/kg (ear), 0.668 W/kg (body)
• FCC ID: 2ADYY-KJ6

Product Usage Instructions

Know Your Phone

1. Front camera placement
2. Volume up key
3. Volume down key
4. Power key & side fingerprint sensor
5. NFC functionality

SIM/SD Card Installation

1. Power off the mobile phone.
2. Refer to the provided picture for SIM/SD card installation guidance.

Charging the Phone

You can charge your device using a charger or by connecting it to the computer with the provided USB cable.
Only use TECNO chargers and cables to avoid damaging the device and invalidating the warranty.

FCC Caution

This device complies with FCC regulations regarding radio frequency interference. Users should be aware of the guidelines toensure proper operation and safety.

Specific Absorption Rate (SAR) Information
This mobile phone meets government standards for exposure to radio waves, ensuring safety for all users.

FCC RF Exposure Information and Statement
The SAR limit in the USA is 1.6 W/kg. The device has been testedand meets these requirements for safe use both at the ear and when worn on the body.

Body-worn Operation
The phone runs on HiOS, which is based on Android OS developed by Google LLC.

FAQ

• What should I do if my phone doesn’t charge?
  If your phone doesn’t charge, try using a different charger or cable. If the issue persists, contact customer support for assistance.

• How do I clean the fingerprint sensor?
  Gently wipe the fingerprint sensor with a soft, dry cloth to remove any dirt or residue that may affect its performance.

Explosion diagram specification

Know your phone

1. Front camera
2. Volume + key
3. Volume – key
4. Power key & side fingerprint sensor
5. NFC

SIM/SD card installation

1. Power off mobile.
2. Refer to the following picture for SIM / SD card installation

Charging the phone

You can charge your device using a charger or by connecting it to the computer using a USB cable (comes with the phone).
Use only TECNO charger and cables. Other chargers or cables may damage the device. This will invalidate your phone warranty.

FCC

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
2. This device may not cause harmful interference.
3. This device must accept any interference received, including interference that may cause undesired operation.
4. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Information to the user.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• I ncrease the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Specific Absorption Rate (SAR) information:
This mobile phone meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.

FCC RF Exposure Information and Statement The SAR limit of the USA (FCC) is 1.6 W/kg averaging over one gram of tissue. Device types: KJ6 (FCC ID: 2ADYY- KJ6) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the ear is 0.745 W/kg and when properly worn on the body is 0.668 W/kg.

Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 1.0 cm must be maintained between the user’s body and the handset, including the antenna. Third-party belt clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or approved antenna.

HiOS runs on AndroidTM OS.
Android is a trademark of Google LLC.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>