Andeman W1 Wireless Air Pump Instruction Manual

Andeman W1 Wireless Air Pump

Related identification for compliance certification.

OVERVIEW OF OPERATION INSTRUCTIONS

This product is applicable to:

• All models of vehicles (excluding trucks and construction vehicles at 5 tons or above), motorcycles, bicycles, and ball products.
• This product functions as automatic inflation for items that need to be inflated. When air pressure lives up to a standard value, it can automatically stop. It is intelligently set and easy to operate.
• This product is provided with LED lighting functions capable of allowing you to operate clearly in dimly lit environments in fear of no darkness.
• This product has a smart USB reverse charging interface, and supports portable charging for mobile phones and other products, with multiple purposes using one unit.
• When the product has no power, use a Type C power cord to connect the onboard interface for charging, which is convenient and fast.
• This product has four inflation modes: vehicles, motorcycles, bicycles, and balls. You can choose an appropriate mode as you require.
• Each mode has different default air pressure values. You will not have to set them yourself.
• Of course, if these default values fail to meet your needs, you can set air pressure values yourself, and then inflate them. When the air pressure lives up to your set value, the air pump will stop automatically.

CAUTIONS

• This product is prohibited from being used by children under 5. Children must be accompanied by adults when they use it!
• Never insert the air duct into a human body or an animal’s mouth, ear, nose, or eye for inflation!
• Do not use this product as a toy-like product!
• It is prohibited to use this product near a place of flammable or explosive liquid and gas (such as a gas station)!
• During inflation, there will be physical heating due to high air pressure running. When air ducts are removed, please do take care, and note burns of hands!
• After continuous operation for 10 minutes, it will stop automatically to prevent the unit from overheating. It is recommended that it be stopped for 2 to 5 minutes before it is turned on once again.
• If the product lies idle for long, it may damage the battery. It is recommended that charging be made at least every three months!

Special reminder
Balloons, toy leather balls, swimming rings, and other products have an inflation pressure lower than the range of the inflation pump, and cannot automatically stop the inflation pump through the preset tire pressure. They need to be used with caution.

OVERVIEW OF PRODUCT PHOTOS

1. LED lighting lamp
2. Air pipe connector
3. Туре-С socket
4. USB-A (output 5V/2A)
5. DC12V input socket
6. Display window
7. Battery power display

PRODUCT PARAMETERS

LIST OF ACCESSORIES

PRODUCT CHARACTERISTICS

1. It is mini, small, light in weight, and convenient for carrying and storage. It is a necessity for self-driven travel, outdoor activities, and daily life.
2. Multiple functions integrated into one: tire pressure detection, inflation pump, nighttime lighting, built-in power bank function, and multiple purposes by one device.
3. Ultra-strong inflation capacity, capable of reaching 150PSI maximum.
4. High-accuracy tire pressure detection at 0.1 BAR.
5. Wide range of h and low working temperatures ranging between – 10°C and +45°C.

CONFIRMATION OF REMAINING POWER AFTER POWER ON

Vehicles, motorcycles, electric vehicles, and bicycles Long press
Long press OK for power on, and after monitoring air pressure value is zero. Confirm that whether the set values are within the reasonable air pressure range of tires to be inflated and other objects. Connect the air nozzle duct in the accessory to the air outlet of the inflation pump and tighten it. After fastening the air nozzle onto the tire core, press the pressure handle to confirm whether the inflation mode is proper. Press OK the button to enable the air pump to start inflating. When the set value is reached, it will stop automatically.

Balls and air cushions
Long press OK for power on. After monitoring the air pressure value and setting it to zero, confirm whether the set value is within the reasonable range of air pressure for tires and other objects that need to be inflated. Connect the air nozzle ducts in the accessory to the air pump outlet hole and tighten it. Attach the air nozzle to the ball needle (or the other two types of conversion nozzles) and then attach the pressure handle. After confirming whether the inflation mode is proper, press the button to start inflating, and stop automatically when the set value is reached.

SELECTING CORRESPONDING TIRE PRESSURE

Mode switching:
This product provides four inflating modes for your option to facilitate your switching and use on different occasions. These four modes are vehicles, motorcycles, bicycles, and balls. You can use the Mode button (M) for switching and selection. After selection, the air pressure default values will change synchronously and automatically.

Air pressure setting:
The product provides four air pressure units for your option: PSI, BAR, KPA, and Kg/cm2. You can switch and select them with the Unit button . The proposed inflation pressure lists for the following commonly used products are for reference only.

FORM OF INFLATION PRESSURE PROPOSED FOR COMMONLY SEEN PRODUCTS

Prompt:
The proposed pressure range values for inflation are for reference in the range values. The requirements set out in the operation instructions for inflation products shall prevail.

ENABLE AIR PUMPS

After power is on, shortly press Start/Stop inflation, and there will be power off if there is no use within 1 minute.

POWER OFF FOR STORAGE

At the end of charging, you can put the air pump and its accessories into the container to be kept.

REVERSE CHARGING

In the power-on state, connect the charging cord of your mobile phone, and the indication of the power display lattice of the charging pump drops in cycle lattice by lattice. After it is long pressed for 3s, the power switch of the charging pump can be turned off.

AIR PRESSURE VALUE SETTING AND ADJUSTMENT BY DEFAULT (+/- SIGNS)

Default air pressure values have been set for this product. However, if they fail to meet your demands, you can independently adjust air pressure values manually. Press the + – button to increase or decrease numbers (Shortly press it to increase or decrease 0.1 (Bar) value each time, and long press it for rapid adjustment, and it is also rapid adjustment with the value of 0.1 as the unit). After it is adjusted to the value you desire, wait 3 seconds to complete the automatic setting. Now, the set values of the air pump have changed the figures you have set. Just press the OK button to start up the air pump.

LED LIGHTING LAMP (LIGHTING SIGNS)

This product is provided with the LED lighting function, which helps you with lighting in dark places. Long press the button to light up the LED light, and press the button once again to turn off the LED light.

FAQ AND TROUBLESHOOTING

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>