TECNO Spark 8C Smartphone User Manual

TECNO Spark 8C Smartphone

Introduction

Mobile Phone
Model： KG5k
Hereby, TECNO MOBILE LIMITED declares that this Mobile Phone is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.

Know your phone

1. Front camera
2. Volume + key
3. Volume – key
4. Power key

SIM/SD card installation

1. Power off mobile.
2. Refer to the following picture for SIM / SD card installation.

Charging the phone

You can charge your device using a charger or by connecting it to the computer using a USB cable (comes with the phone).

1. Please remind the front and back of the plug
2. Use only TECNO charger and cables. Other chargers or cables may damage the device. This will invalidate your phone warranty.

This device may be restricted for use, depending on the local network. Restrictions in the 5GHz band: According to 10(10) of Directive 2014/53/EU, the packaging shows thatthis radio equipment will be subject to some restrictions when placed on the market in Belgium (BE), Bulgaria (BG), Czech Republic (CZ), Denmark (DK),Germany (DE), Estonia (EE), Ireland (IE), Greece (EL), Spain (ES), France (FR), Croatia (HR), Italy (IT), Cyprus (CY), Latvia (LV), Lithuania (LT), Luxembourg (LU), Hungary (HU), Malta (MT), Netherlands (NL), Austria (AT), Poland(PL), Portugal (PT), Romania (RO), Slovenia (SI), Slovakia (SK), Finland (FI), Sweden (SE), Norway (NO), the United Kingdom in respect of Northern Ireland (UK(NI)) ,Iceland (IS), Liechtenstein (LI), Switzerland (CH) and Turkey (TR). The WLAN function for this device is restricted to indoor use due to its operation in the 5.15 to 5.35 GHz frequency range.

Operating Frequency (RF)

• E-GSM900: 880-915MHz (TX), 925-960MHz (RX);
• DCS1800: 1710-1785 MHz (TX), 1805-1880 MHz (RX);
• WCDMA BAND I: 1920-1980 MHz (TX), 2110 -2170 MHz (RX);
• WCDMA BAND VIII: 880-915MHz (TX), 925-960MHz (RX);
• LTE BAND1: 1920-1980MHz(TX), 2110-2170MHz(RX);
• LTE BAND3: 1710-1785MHz (TX), 1805-1880MHz(RX);
• LTE BAND7: 2500-2570 MHz (TX),2620-2690 MHz (RX);
• LTE BAND8: 880 -915MHz(TX), 925-960MHz(RX);
• LTE BAND20: 832-862 MHz (TX),791-821 MHz (RX);
• LTE BAND28: 703-733MHz (TX), 758-788MHz (RX);
• LTE BAND38: 2570 -2620 MHz(TX), 2570-2620MHz(RX);
• LTE BAND40: 2300-2400 MHz(TX), 2300 -2400 MHz(RX);
• BT: 2402-2480MHz (TX/RX);
• Wi-Fi(2.4G): 2412-2472 MHz (TX/RX);
• Wi-Fi (5G): Band 1: 5150-5250 MHz (TX/RX);
• Band 2: 5250-5350 MHz(TX/RX);
• Band 3: 5470-5725 MHz(TX/RX);
• Band 4: 5725-5875 MHz (TX/RX);
• GPS: 1.57542GHz(RX);
• FM: 87.5-108 MHz(RX);

Modulation mode

GMSK, 8PSK (GSM)
BPSK, QPSK, 16-QAM (WCDMA)
QPSK, 16-QAM, 64-QAM (LTE)
GFSK, π/4-DQPSK, 8DPSK (BT)
GFSK (BLE)
BPSK/QPSK/16QAM/64QAM/DSSS/OFD
M/ CCK (WIFI b/g/n)
IEEE 802.11a/n: OFDM (BPSK / QPSK / 16QAM / 64QAM) BPSK (GPS) FM(FM)

RF Output power

• GSM900: 33dBm±2dB
• GSM1800: 30dBm±2dB WCDMA BAND
• I/VIII: 24dBm+1.7dB/-3.7dB LTE
• BAND1/3/7/8/20/28/38/40: 23dBm+2.7d B /-2.7dB
• BT: 0-10 dBm
• Wi-Fi: 14dBm +/-3dB

Specific Absorption Rate (SAR) Certification

THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO WAVES

CAUTION：

1. Use careful with the earphone maybe excessive sound pressure from earphones and headphones can cause hearing loss.

2. Risk of explosion if battery is replaced by an incorrect type, dispose of used batteries according to the instructions.
   ● disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
   ● leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;
   ● a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

3. The product shall only be connected to a USB interface of version USB 2.0.

4. Adapter shall be installed near the equipment and shall be easily accessible.

5. EUT Temperature: -10℃～+65℃ (Standalone). 5~+40℃(with adapter).

6. Adapter1: XCU32 Input: AC100-240V 50/60Hz 500mA Output: DC 5.0V 2.0A Adapter2: U100TKB Input: 100-240V~50/60Hz 400mA Output: DC 5.0V 2.0A

7. The device complies with RF specifications when the device used at 5 mm from your body, and the holder must not be of metal composition.

8. To prevent possible hearing damage, do not listen at high volume levels for long periods.

9. Earphone and USB cable are shielded

HiOS runs on AndroidTM OS.
Android is a trademark of Google LLC.

Documents / Resources

| TECNO Spark 8C Smartphone [pdf] User Manual
Spark 8C Smartphone, Spark 8C, Smartphone
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>