POPPSTAR 1008821 AC DC Power Supply Unit Instruction Manual
- June 9, 2024
- POPPSTAR
Table of Contents
POPPSTAR 1008821 AC DC Power Supply Unit
Introduction
Please read these instructions carefully before using the universal power supply.
CAUTION: Ignoring the safety and instructions for use listed here can lead to serious accidents, injuries or even property damage.
Includes
Universal power supply, manual
Specifications
Model
| 1008821| 1008822| 1008823| 1008825| 1009691| 1010326
---|---|---|---|---|---|---
Input| 100 – 240V AC| 100 – 240V AC| 100 – 240V AC| 100 – 240V AC| 100 – 240V
AC|
100 – 240V AC
Output
| 12V DC (2A)| 12V DC (2A)| 12V DC (2A)| 12V DC (3A)| 12V DC (2A)| 24V DC
(1.5A)
Output power| 24W| 24W| 24W| 36W| 24W|
36W
Plug connection
| 3.51.35mm| 5.52.5mm| 5.52.5mm| 5.52.5mm| 5.52.1mm| 5.52.5mm
Cable length| 1.5m| 1.5m| 2.4m| 1.5m| 1.5m|
1.5m
Dimensions power supply
| 70 x 42 x 29 mm| 71.2 x 43.2 x 29 mm| 71.2 x 43.2 x 29 mm| 97.1 x 45.1 x 32 mm| 71.2 x 43.2 x 29 mm| 87 x 57.5 x 44 mm
Safety instructions
- The product has no main switch: To remove it quickly in an emergency, only use it at easily accessible sockets.
- Always pull the adapter plug out of the socket directly at its base.
- Keep the product out of reach of children.
- Contains small parts that can be swallowed, keep away from small children!
- Never open the housing.
- Never cover the product.
- Never expose the product to extreme conditions such as heat/cold, moisture, direct sunlight, microwaves or mechanical pressure.
- Never crush the power supply cable, never pull it over sharp edges or hot surfaces and never use it to carry the product.
- Do not modify or disassemble the product or accessories.
- Never repair damaged products yourself, please contact our technical support.
- Use the product only in dry indoor areas.
- WARNING short circuit hazard: Never insert objects into ventilation slots or connection sockets.
- WARNING fire hazard: Selecting a higher voltage than specified by the manufacturer can cause serious damage to both the device and the power supply!
- CAUTION risk of injury from tripping: Make sure that nobody risks of tripping over the cable.
Instructions for use
-
Compare the specifications of all the devices you want to use to ensure their compatibility.
The voltage (in volts) of the device must match with the power supply (if the power supply provides more voltage than the device requires, this may result in damage. If the voltage is too low, the device will not work).
The specified amperage (in amps) of the power supply is the maximum amount of amperage. If your device requires a higher amperage than the power supply can provide, the power supply may be damage. -
Connect your device to the power supply.
-
Then plug the power supply into a socket.
-
Disconnect both plugs after use.
Storage and maintenance
- Store the product in a cool and dry place.
- Use a dry and soft cloth for cleaning the product, do not expose it to cleaning agents or chemicals!
Liability
Poppstar GmbH is not liable for personal injury or property damage caused by incorrect installation, use or maintenance.
Instructions for disposal
Product:
According to the European WEEE Directive, electrical and electronic equipment
must not be disposed of with regular household waste. Their components must be
recycled or disposed of separately because toxic and hazardous components can
cause permanent damage to health and to the environment if disposed
incorrectly.
As a consumer, you are obliged under the Electrical and Electronic Equipment
Act (ElektroG) to return electrical and electronic equipment free of charge at
the end of its service life to the manufacturer, the outlet or the public
collection points set up for this purpose. Details are regulated by the
applicable national law.
The symbol on the product, the instructions for use and/or the packaging
indicates these regulations. By separating, recycling and disposing of old
appliances in this way, you are making an important contribution to protecting
our environment.
Packaging:
Packaging can be disposed of free of charge at the appropriate collection
points: paper in the paper bin, plastics in the plastic bin and glass in the
correct glass container.
EC Declaration of Conformity
By means of the CE symbol, Poppstar GmbH declares that the product complies
with the basic requirements and directives of the European regulations.
Used symbols (on the power supply)
For indoor use only| IEC 60417-5957|
---|---|---
Alternating current| IEC 60417-5032|
Direct current| IEC 60417-5031|
Polarity of the DC mains connection| IEC 60417-5926| ****
Protection classes: appliance class II| |
Power loss in standby mode: energy efficiency class 5 [model 1010326]| |
Power loss in standby mode: energy efficiency class 6 [all other models]| |
Customer support
Contact
Poppstar GmbH
Heidelbergerstraße 49
74746 Höpfingen
Germany
E-Mail:info@poppstar.eu
Tel: +49 (0)6283 21570-27 (Mo.- Fr. 2 PM – 5 PM)
Live chat:www.poppstar.eu (Mo.- Fr. 8 AM- 5 PM)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>