COMPEX WLW7002E25 WiFi 7 Dual Band Module Instructions
- September 5, 2024
- Compex
Table of Contents
WLW7002E25 WiFi 7 Dual Band Module
Instructions
Component Map
Power Requirements
DC Power 5V (Max)
Power Consumption 13,3W
“For the customer who want to use 5V Extemal Power Pin, please make sure pins
15, 17, 19, 21 and 23 were not connected with your board.
For pins 52, 53 and 55 support either 1.8V or 3.3V. However, it’s important to note that you can only select one voltage option for these pins.
Default voltage for pins 52, 53 and 55 is 1.8V
M.2 Edge Connector Pin Assignment
M.2 edge connector pin assignment
Top side| Bottom side
1| GND| 2| VDD_3V3
3| REFCLK_IO_P0| 4| VDD_3V3
5| REFCLK_IO_NO| 6| PCIE_LEDO(GPIO25)
7| GND| 8| NC
9| PTA2_BT_ACT| 10| NC
11| PTA2_BT_PRIO| 12| NC
13| PTA2_WL_ACT| 14| WSI_DAT_IN(GPI048)
15| VDD_SV| 16| PCIE_LED1(GPIO26)
17| VDD_SV| 18| GND
19| VDD_SV| 20| WSI_CLK_IN(GP1049)
21| VDD_SV| 22| NC
23| VDD_SV| |
33| Mechanical| key E| WSI_DAT_OUT(GPI050)
GND| 32|
35| PCIEO_RXO_P| 34| NC
37| PCIEO_RXO_N| 36| WSI_CLK_OUT(GPI051)
39| GND| 38| NC
41| PCIEO_TXO_P| 40| NC
43| PCIEO_TXO_N| 42| NC
45| GND| 44| PTA1 BT PRIO
47| PCIEO_REFCLK_P| 46| PTA1_WL_ACT
49| PCIEO_REFCLK_N| 48| PTAl_BT_ACT
51| GND| 50| NC
53| PCIEO_CLKREQN| 52| PCIE0 RST N
_
55| PCIEO_WAKE_N| 54| NC
57| GND| 56| WLAN_DISABLE
59| PCIEO_RX1_P| 58| NC
61| PCIEO_RX1_N| 60| NC
63| GND| 62| NC
65| PCIE0 TX1 P| 64| NC
67| PCIEO_TX1_N| 66| NC
69| GND| 68| NC
71| REFCLK JO_N1| 70| NC
73| REFCLK JO_Pl| 72| VDD_3V3
75| GND| 74| VDD_3V3
Copyright © Compex Systems. All rights reserved. COMPEX and the COMPEX logo, are registered trademarks of Compex Systems Pte. Ltd. While every effort is made to ensure the information is accurate, Compex does not accept liability for any errors or mistakes that may arise. All specifications are subject to change without notice.
Compex Systems Pte Ltd
www.compex.com.sg
(+65) 6288 8220
sales@compex.com.sg
Last Updated: 10/01/2024 MW, LL, GS, AT