PHILIPS 1741F Smart HD Display Sonic ToothBrush User Manual

PHILIPS 1741F Smart HD Display Sonic ToothBrush User Manual

SAFEGUARDS AND WARNINGS

• WARNING! Not suitable for children under 36 months due to small parts. Choking hazard. Keep the appliance, charging base and its cable out of reach of children.
• This appliance should only be used by children old enough to understand the instructions concerning the use of the appliance and its hazards or under direct adult supervision.
• Cleaning and maintenance of the device shall not be completed by children under the age of 10 and requires direct adult supervision.
• When undergoing treatment of any oral condition consult your dental professional prior to use. Replace brush head every 3 months or sooner if the bristles show signs of significant wear or damage.
• Do not use any brush heads other than what is recommended by the manufacturer.
• If damaged, discontinue use. Do not attempt to repair/modify.
• Use only for intended use.
• Do not store or charge Brush link Pro” over water or heat.
• Keep away from strong magnetic fields as it could lead to malfunctions or damage.
• Do not charge the appliance on a metal desktop.

Caution

• Do not clean the brush head, handle and charging base in the dishwasher.
• Do not use the toothbrush in the bath or shower.
• If you had oral or gum surgery in the previous 2 months, consult your dentist before using it.
• If you have medical concerns, consult your doctor before you use the appliance.
• The appliance complies with the safety standard for electromagnetic devices. If you have a pacemaker or other implanted device, consult your doctor before use.
• This appliance has only been designed for cleaning teeth, gums and tongue. Do not use it for any other purpose.
• The toothbrush is a personal care device, suggest to use for use om multiple patients in a dental practice or institution.
• Stop using a brush head with crushed or bent bristles. Replace the brush head every 3 months or sooner if signs of Bristles Fade appear.
• Do not use other brush heads instead of the ones recommended by the manufacturer.
• Supervise children while they are brushing until they have established good brushing habits.

Product Components

Smart Sonic Toothbrush

Baery Charging

• For ultimate performance, charge your sonic toothbrush battery for a full 12 hours, before initial use.
• When the battery is low, the device will vibrate 4 times and the LED indicator will flash red.
• Place the brush handle on the charging base – the LED indicator will flash white during charging.
• The LED indicator light in white color when battery is fully charged.
• Hold down to activate the battery for the first time.

Attention:
Do not charge your sonic toothbrush via computer USB port. After the initial 12 hour battery charge, please ensure subsequent charging time is 8 hours for optimal battery life.

Functions of Smart Toothbrush

Instruction for Use

Cleaning Your Smart Toothbrush

Keep your sonic toothbrush clean by rising it down and wiping it with a clean, damp cloth. A mild soap can be used if needed. Do not place your toothbrush, or any of its components, in the dishwasher.

Storing Your Smart toothbrush

Storing- If you are not going to use it for an extended period of time, unplug the charging base, clean all parts and store them in a cool, dry place away from direct sunlight.

Environment

By doing this, you help to preserve the environment. The built-in rechargeable battery contains substances that may pollute the environment. Always remove the battery before you discard and hand in the appliance at an official collection point. Removing the rechargeable battery. This process is not reversible. To remove the recharge battery, you need a flat-head (standard) screwdriver. Observe basic safety precautions when you follow the procedure above. Be sure to protect your eyes, hands, fingers and the surface on which you work.

Guarantee Restrictions

The terms of the international guarantee do not cover the following:
– Brush head.
– Damage caused by misuse, abuse, neglect, alterations to unauthorized repair.
– Normal wear and tear, including chips, scratches, abrasions, discoloration or fading

FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.

FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance between 20cm the radiator your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>