QUOIZEL LWS7804A1 Renford 4 Light Brushed Nickel Transitional Damp Rated Chandelier User Guide

QUOIZEL LWS7804A1 Renford 4 Light Brushed Nickel Transitional Damp Rated Chandelier User Guide

Thank you for purchasing this QUOIZEL product.
If you have any questions or problems, please call our customer service department, 8:30 a.m. – 5:00 p.m., EST, Monday – Thursday, 10:20 a.m. – 5:00 p.m., EST, Friday.
For the quickest response, please visit : Quoizel.com and click on Contact Us.

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the product.

WARNING

• RISK OF ELECTRIC SHOCK – Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
• RISK OF FIRE – Use bulbs specified by the markings and/or labels on the fixture.

CAUTION

• For your safety, read instructions completely before beginning installation.
• If in doubt about electrical installation, consult a licensed electrician.
• Turn off electricity to fixture before replacing the bulb(s).

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.

LIGHT SOURCE

4 BULBS REQUIRED

*Please check with bulb manufacturer for dimming capabilities.

BULB BASE TYPE
BULB SHAPE

TYPE S/TIPO S
LED*| 8.5
Watts| 800
Lumens
Lúmenes
---|---|---
TYPE S/TIPO S
INCANDESCENT
INCANDESCENTE| 60
Watts| 800
Lumens
Lúmenes

TOOLS REQUIRED

PACKAGE CONTENTS

1. 
   A Assemble Square Ring B (K) with Square Ring A (I) .
   B Insert the protruding portion of Square Ring A (I) into the slot on Square Ring B (K).
   

2. 

3. A Adjust fixture chain length
   B Install fixture chain.
   

4. A Pull the supply wires and ground wire up through the fixture chain alternating links.
   B Push the ends of the supply wires and ground wire up through the canopy loop and into the outlet box. The remaining slack wire will be inserted into the ceiling canopy.
   

5. 

6. 
   

7. 

CARE AND MAINTENANCE

• Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage the finish.

TROUBLESHOOTING

PROBLEM| POSSIBLE CAUSE| CORRECTIVE ACTION|
---|---|---|---
Bulbs will not light.|

1. Bulb is burned out
2. Power is off.
3. Faulty wire connection.
4. Faulty switch.

|

1. Replace light bulb.
2. Make sure power supply is on.
3. Check wiring.
4. Test or replace the switch.

|
Fuse blows or the circuit breaker trips when light is turned on.
Crossed wires or power wire is grounding out.
Check wire connection. Vérifiez les connexions.|

MADE IN CHINA                

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>