POPPSTAR 12V 2A (2000mA) AC DC Adapter Power Adapter for Docking Stations Instruction Manual
- June 13, 2024
- POPPSTAR
Table of Contents
POPPSTAR 12V 2A (2000mA) AC DC Adapter Power Adapter for Docking Stations Instruction Manual
Please read these instructions carefully before using the universal power
supply.
CAUTION: Ignoring the safety and instructions for use listed here can lead to
serious accidents, injuries or even property damage.
Includes
Universal power supply, manual
Specifications
Safety instructions
-
The product has no main switch: To remove it quickly in an emergency, only use it at easily accessible sockets.
-
Always pull the adapter plug out of the socket directly at its base.
-
Keep the product out of reach of children.
-
Contains small parts that can be swallowed, keep away from small children!
-
Never open the housing.
-
Never cover the product.
-
Never expose the product to extreme conditions such as heat/cold, moisture, direct sunlight, microwaves or mechanical
pressure. -
Never crush the power supply cable, never pull it over sharp edges or hot surfaces and never use it to carry the product.
-
Do not modify or disassemble the product or accessories.
-
Never repair damaged products yourself, please contact our technical support.
-
Use the product only in dry indoor areas.
-
WARNING short circuit hazard: Never insert objects into ventilation slots or connection sockets.
-
WARNING fire hazard: Selecting a higher voltage than specified by the manufacturer can cause serious damage to both the device and the power supply!
-
CAUTION risk of injury from tripping: Make sure that nobody risks of tripping over the cable.
Instructions for use
- Compare the specifications of all the devices you want to use to ensure their compatibility. The voltage (in volts) of the device must match with the power supply (if the power supply provides more voltage than the device requires, this may result in damage. If the voltage is too low, the device will not work). The specified amperage (in amps) of the power supply is the maximum amount of amperage. If your device requires a higher amperage than the power supply can provide, the power supply may be damage.
- Connect your device to the power supply.
- Then plug the power supply into a socket.
- Disconnect both plugs after use.
Storage and maintenance
- Store the product in a cool and dry place.
- Use a dry and soft cloth for cleaning the product, do not expose it to cleaning agents or chemicals!
Liability
Poppstar GmbH is not liable for personal injury or property damage caused by incorrect installation, use or maintenance.
Instructions for disposal
Used symbols (on the power supply)
Contact
Poppstar GmbH
Heidelbergerstraße 49
74746 Höpfingen
Germany
E-Mail: info@poppstar.eu
Tel: +49 (0)6283 21570-27 (Mo.- Fr. 2 PM – 5 PM)
Live chat: www.poppstar.eu (Mo.- Fr. 8 AM- 5 PM)
Misprints and changes to the product, packaging and product documentation reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>