DENVER BTH-205WHITEMK2 Headset Instruction Manual
- June 6, 2024
- Denver
Table of Contents
DENVER BTH-205WHITEMK2 Headset Instruction Manual
facebook.com/denverelectronics
Congratulations with your new Bluetooth headset. Please read this manual before using it to make sure you use it correct.
Headset overview
Pairing
- Ensure that your phone or Bluetooth device is switched on.
- To pair the headset that has not been previously paired with a device, please switch on the headset by push and hold power button for approximately 5 seconds., the headset starts in Bluetooth search mode (red/blue light flashes quickly and alternately and there is a prompt tone). Press and hold the power key for 3 seconds, it will go into reconnection mode.
- Activate Bluetooth on your phone or Bluetooth device, and set it to search for Bluetooth device.
- Select “BTH-205” from the list of found devices on your phone or Bluetooth devices.
- When Bluetooth is paired successfully, there will be prompt tone and the blue light turns to lighting continuously.
Switch On
After unit has been paired (look above), just hold power until the LED lights up and then let go. When it has been paired it will automatically reconnect once turned on.
Switch Off
To switch off, press and hold the Power key about 3 seconds. There is a prompt tone and a red indicating light. If the headset is not connected to a device within 10 minutes, it switches off automatically.
Adjust the Volume
Turn volume up or down by long push on volume +/- key during a calling or while listening to music. When the volume reaches to maximum, there is a warning tone.
Charge the Battery
Please insert the Micro USB end of the included USB cable into the USB micro port charger connector under the left ear-cap of the headphone, and plug the other end into a USB port on your computer or other devices made for USB charging. The indicator light will be red while charging. Once fully charged, the indicator light will be blue. Charge time is approximately 2.5 hours if battery is empty. The fully charged battery has power for up to 15 hours talking and/or music time (and up to 300 hours standby time).
Calls
To answer or end a call, push once on the phone key to answer and long press (approx. 1.5 second) to reject a call. End a call with a short press on phone key.
Passive model
You can use DENVER BTH-205WHITEMK2 as a wired headphone. Simply connect the headset to your MP3 player with 3.5mm audio cable.
Caution:
- Please avoid very high volume for a constant period of time. This may damage your hearing.
- If not used for a long time, make sure to charge it once every 6 months.
- Battery is built-in and it is not replaceable.
- Please keep the headset away from wet areas. Do not use in rain or moist weather.
- The operating temperature is 5°C to 35°C. Please don’t put the headset into fire to avoid battery blast accident.
Please notice – All products are subject to change without any notice. We take reservations for errors and omissions in the manual.
ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S
Electric and electronic equipment and included batteries contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment and batteries) is not handled correctly
Electric and electronic equipment and batteries is marked with the crossed out trash can symbol, seen below. This symbol signifies that electric and electronic equipment and batteries should not be disposed of with other household waste, but should be disposed of separately.
As the end user it is important that you submit your used batteries to the appropriate and designated facility. In this manner you make sure that the batteries are recycled in accordance with legislature and will not harm the environment.
All cities have established collection points, where electric and electronic equipment and batteries can either be submitted free of charge at recycling stations and other collection sites, or be collected from the households. Additional information is available at the technical department of your city.
Hereby, Inter Sales A/S declares that the radio equipment type BTH-205 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address.
Please enter: www.denver-electronics.com and then click the search ICON on
topline of website.
Write modelnumber: BTH-205
Now enter product page, and red directive is found under downloads/other
downloads.
Operating Frequency Range: 2402-2480 MHz
Max Output Power: 14dBm
DENVER ELECTRONICS A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
facebook.com/denverelectronics
facebook.com/denverelectronics
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>