belkin MMA006 iPhone Mount with MagSafe for Mac Notebooks User Guide
- June 9, 2024
- belkin
Table of Contents
MMA006 iPhone Mount with MagSafe for Mac Notebooks
User Guide
Model :MMA006
Attaching to iphone®
Attaching to MacBook®
Aligning camera
Screen angle
Kickstand/Ring grip
How to attach the Belkin MMA006 to your MacBook
The Belkin MMA006 allows you to mount your MagSafe®-compatible iPhone® securely onto your Mac® notebook to utilize the Continuity Camera feature found in the latest versions of iOS and macOS®. This article will walk you through how to connect and orient your phone to the Belkin MMA006 and your MacBook®.
Attaching the Belkin MMA006 to your iPhone
The Belkin MMA006 is designed to work with MagSafe-compatible iPhones and
official MagSafe cases. To attach the Belkin MMA006 to your phone, gently
place the flat side of the mount in the center of your phone or case where the
MagSafe ring is.
Attaching the mount to your MacBook
After the mount is attached to your iPhone you can then attach it to your
MacBook. Place your finger under the Belkin logo and gently pull out the
mount.
Once fully extended, the mount will stop moving. At this point, you can rest
it on the top of your MacBook screen.
Adjusting the mount for proper camera framing
The mount allows you to use your iPhone in either portrait or landscape
orientation by simply rotating it on the back of your phone. Doing this will
change the orientation and location of your iPhone’s camera in relation to
you.
While you can certainly place the mount anywhere on the top of your MacBook
screen, it is recommended to align your iPhone’s camera with the center of
your MacBook screen for proper camera framing.
Setting the proper screen angle when using the mount
The mount will attach securely to your iPhone using a MagSafe connection. It
also holds securely onto the top of your MacBook’s screen. To prevent any
accidental damage to your iPhone or MacBook screen, it is recommended to keep
your MacBook screen either 90° vertically or at a shallow angle when using the
mount.
Opening the MacBook at too far of an angle or pulling close can cause the
iPhone and the mount to slip off of your MacBook.
How to use the Belkin MMA006 as a ring grip or kickstand
The Belkin MMA006 allows you to mount your MagSafe®-compatible iPhone®
security onto your Mac® notebook to utilize the Continuity Camera feature
found in the latest versions of iOS and macOS®. This article will show you how
to utilize the ring grip and kickstand features of the mount.
Attaching the Belkin MMA006 to your iPhone
The Belkin MMA006 is designed to work with MagSafe-compatible iPhones and
official MagSafe cases. To attach the Belkin MMA006 to your phone, gently
place the flat side of the mount in the center of your phone or case w here
the MagSafe ring is.
Opening the ring grip / kickstand on the mount
The mount features a metal kickstand with a hole in the center designed to
place your finger in. Using your finger on the edge of the kickstand, gently
pull out the kickstand to the desired angle. The kickstand will go from 0°
(closed) to a full 90° and stop when it is fully open.
Using the mount as a kickstand
The Belkin MMA006 can be used as a kickstand to hold your phone in a landscape viewing position. You can set the desired viewing angle by pulling out the kickstand on the unit and then place it on the table. Since the mount attaches to your phone with MagSafe, you can rotate the mount to allow the charging ports and buttons to be on either side that you like.
Using the mount as a ring grip
A great feature of the mount is that it allows you to use it as a ring grip,
allowing for more comfortable grip on your phone while taking advantage of the
holding power of MagSafe. Simply pull out the kickstand to a comfortable angle
and place your finger through the hole in the center. The mount can be rotated
to give you a more comfortable position to hold the phone and allow it to be
used in either your left or right hand.
Mount your iPhone securely onto your Mac notebook to utilize Continuity Camera features in the latest version of macOS for FaceTime, capturing content, video conferencing and more.
02022 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. FaceTime. (Phone, Mac. macOS, MacBook, MacBook Air. MacBook Pro and MagSafe are trademarks of Apple Inc . registered in the U.S. and other coulertes. The trademark -Orton.’ is used in Japan with a license from Amnon. K.K. 0 2022 Belkin International. Inc Tous drain reserves. Inc El Segundo, CA 9020 USA Belkin Asia Pacific Ltd. Hong Kong Begun Ltd . Unit 1, Regent Park, Booth Drive Wellingborough, Northants NN8 6GR United Kingdom Belton B V.. Het ifrerbet Uwe.; 108. Plaze Arena – Jupeer.1101CM, Amsterdam. The Netherlands Belkin Ltd. Tugger ah. Australia
Safe and secure magnetic attachment for easy, seamless, hands-free camera
streaming Flip your I Phone orientation easily to stream
or record in portrait or landscape Magnetic mount doubles as a ring grip and
kickstand for iPhone
belkln.com/support
belkln.com/warranty
Limited Lifetime Warranty (Amencas and Europe)
2•Yoar Limited Wai ranty (rest of globel)
Australian consumers. ptoaso see inside of the packaging to, warranty details
Made in China