anslut 015181 Portable Heater Fan Instruction Manual

: June 9, 2024
: anslut

Table of Contents

SAFETY INSTRUCTIONS
WARNING
SYMBOLS
TECHNICAL DATA
DESCRIPTION
USE
HOW TO USE
MAINTENANCE
STORAGE
TROUBLESHOOTING
Care for the environment
CUSTOMER SUPPORT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

anslut 015181 Portable Heater Fan Instruction Manual

SAFETY INSTRUCTIONS

Keep children less than 3 years old under supervision when they are near the product.
The product can be switched on/off by children from 3 to 8 years old only if it is mounted in the correct position to use, and if they are supervised or receive instructions concerning the safe use of the product and understand the risks involved.
Do not allow children from 3 to 8 years old to connect, use, clean or maintain the product.
This product can be used by children from 8 years and upwards and by persons with physical, sensorial or mental disabilities, or persons who lack experience or knowledge, if they are supervised or receive instructions concerning the safe use of the product and understand the risks involved. Keep children under supervision to make sure they do not play with the product.
Do not allow children to clean or maintain the product without supervision. Keep children less than 3 years old under supervision when they are near the product.
The product is only intended for household use.
Pull out the plug if the product is not going to be used for some time.
Do not run the power cord in front of the product.
The product must only be connected to a correctly installed and earthed power point. Check that the mains voltage corresponds to the rated voltage on the type plate.
Make sure to plug the plug firmly in the power point. Do not touch the power cord or the plug with wet hands.
Put the switch in the OFF position and pull out the plug when the product is not in use.
Do not route the power cord under carpets etc. Place the power cord so that there is no risk of treading on it, or tripping over it.
Do not expose children to the flow of air from the product for long periods.
Only use the product in a well-ventilated area.
Do not place the product near walls or corners, where incoming or outgoing air can be blocked.
Do not put the product near curtains, or other flammable materials – fire risk.
Do not expose the product to vibrations, knocks or blows when in use.
The product is not intended to be controlled with an external timer or a separate remote control that can make the product start automatically.
Do not use longer than necessary extension cords. Always unfold the complete extension cord.
Do not connect other appliances to the same power outlet the product is using.
Never leave the product unattended when plugged in. Keep children and pets at a safe distance.
Never put the product in a vehicle that is moving or on any other surface where there is a risk of it tipping over.
Place the product where the air flow cannot be blocked by furniture or curtains, etc.
Do not use the product in explosive environments, for example in the vicinity of flammable liquids, gas or dust. Do not place the product near a naked flame or other source of heat.
Do not attempt to dismantle or repair the product. Repairs should be carried out by qualified personnel or an authorized service center.
A damaged cord or plug must be replaced by an authorized service center or qualified person to ensure safe use.
Switch off the product immediately and pull out the plug in the event of any abnormal noise, smell, smoke or other sign of a problem.

WARNING

Some parts of the product get very hot risk of burn injuries. Keep the product under careful supervision when it is used by, or near children or persons with functional disorders.
Do not put any foreign objects on the product.
Never poke your fingers or any other objects into the inlet or outlet openings.
Do not use the product near a bath, shower or swimming pool.
Do not cover the product, this can result in overheating.

SYMBOLS

Symbol | Read the instructions.
---|---
Symbol | Do not cover.
| Approved in accordance with the relevant directives.
****| Recycle discarded product in accordance with local regulations.

TECHNICAL DATA

Rated voltage	230 V ~ 50 Hz
Output	2000 W
Power settings	25/1000/2000 W
Overheating protection	65°C
Safety class	I
Protection rating	IP20
Size	21 x 16 x 21.7 cm
Weight	1.7 kg

DESCRIPTION

Status light
Thermostat dial
Mode selector
Fan mode
Low output mode + fan
High output mode + fan
FIG. 1

USE

BEFORE USE

Unpack the product and all the parts from the packaging and place them on a level surface.
Check that the mains voltage corresponds to the rated voltage on the type plate. Plug in the plug. The product is now ready to use.

IMPORTANT:

Do not place the product near walls or corners, where incoming or outgoing air can be blocked.
Do not place the product directly below a power outlet.

HOW TO USE

Place the product standing upright on a level, stable surface at a safe distance from flammable objects and substances.
Plug the plug into the power point.
Set the thermostat dial to the required mode.
Start the product by setting the mode selector to the required output.
The heating element switches off when the set room temperature is reached, including the fan.
The heating element and fan start again when the temperature drops .
The product starts and switches off automatically to maintain a constant room temperature.
To switch off the product, set the thermostat to MAX and put the mode selector in fan mode.
Allow the product to run for two minutes to cool and then switch off the product and pull out the plug.

MAINTENANCE

NOTE:
Switch off the product, pull out the plug, and wait until the product has completely cooled before cleaning and/or maintenance.

Wipe off any dust from the surface of the product with a soft cloth.
When necessary clean with a cloth moistened with a mild detergent and then dry with a soft cloth.
Do not use petrol, solvent or strong detergent. This can damage or dis colour the product.

STORAGE

Pull out the plug and cover over the product to protect it from dust if it is not going to be used for some time.
Store the product in a cool, dry and well ventilated place.