Immax 08491L Outdoor Solar Light User Manual
- June 9, 2024
- immax
Table of Contents
Immax 08491L Outdoor Solar Light
TECHNICAL PARAMETERS
- Code : 08491L
- Solar panel : monocrystalline silicon 5V/1.8W
- Battery : 18650 lithium iron phosphate battery 3.2V/1300mAh
- LED TYPE : SMD2835 1*4pcs LED
- Charging time : 4-5 hours
- Working time : 8-10hours ( depending on battery charge)
- Degree of protection : IP54
- Function : light sensor
- Chromaticity : 3000-3500K
- Material : ABS
Please read the instruction manual thoroughly before installing the solar lamp. And follow the instructions given. Let the solar luminaire charge sufficiently in sunlight before first usefor at least 4-6 hours. The luminaire will charge during the day and automatically light up after dark. If the solar lantern is not working properly or the working time is short, place it directly in the sun and let it charge for 2 days in direct sunlight. Do not switch on the solar lamp during this process. The battery should be fully charged.
NOTICE
-
Install the product preferably in a place where there are no trees, gutters or other obstructions, that could block sunlight. If the solar panel does not have sufficient sunlight, this will affect the light duration.
-
Do not install the product under other light fixtures. Lighting generated by other fixtures may cause,
the product to malfunction or flicker. -
The product has a light sensor, use it where there is no light.
-
Rainy, foggy, or cloudy weather will affect the charging of the lamp, working time will be shortened.
-
The performance of the solar reflector depends on the environment, latitude, seasons, etc.
-
Install the product preferably in places where there are no trees, gutters and other obstacles, that could block sunlight. If the solar panel does not have sufficient sunlight, this will affect the duration of illumination
-
The solar spotlight contains batteries, please recycle the batteries in accordance with the relevant laws and regulations of the user‘s country or region.
-
Do not immerse the solar panel in water
MAINTENANCE
In order to allow the PV panel to receive solar radiation to the maximum extent, keep the solar panel clean – wipe it with a soft, damp cloth. Avoid abrasive and cleaning agents!
CONTENTS OF THE PACKAGE
- 1x Solar reflector
- 1x Installation instructions
- 2x Screw
- 2x dowel
ON/OFF CONTROL
Pressing the switch – the luminaire switches on to the working mode
INSTALLATION MANUAL
- Using a paper template, mark the position where the holes are to be drilled.
- Drill the holes with an Accu Drill
- Insert the dowels into the drilled holes and screw in the screws
- Switch on the luminaire and fix only on the screws
Manufacturer and importer: WPB CZ, s.r.o. Pohoří 703, 742 85 Vřesina, Czech Republic www.immax.cz | www.immax.eu