CHAUVET PROFESSIONAL Rogue Outcast 3 Spot Compact IP65 LED Moving Head User Guide

CHAUVET PROFESSIONAL Rogue Outcast 3 Spot Compact IP65 LED Moving Head

About This Guide

The Rogue Outcast 3 Spot Quick Reference Guide (QRG) has basic product information such as mounting, menu options, and DMX values. Download the User Manual from www.chauvetprofessional.com for more details.

Disclaimer

The information and specifications contained in this QRG are subject to change without notice.

LIMITED WARRANTY

FOR WARRANTY REGISTRATION AND COMPLETE TERMS AND CONDITIONS PLEASE VISIT OUR WEBSITE.
For Customers in the United States and Mexico: www.chauvetlighting.com /warranty-registration.
For Customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, and Germany: www.chauvetlighting.eu /warranty-registration.

Chauvet warrants that this product shall be free from defects in material and workmanship under normal use, for the period specified in, and subject to the exclusions and limitations set forth in the full limited warranty on our website. This warranty extends only to the original purchaser of the product and is not transferable. To exercise rights under this warranty, you must provide proof of purchase in the form of an original sales receipt from an authorized dealer that shows the product name and date of purchase. THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES.

This warranty gives you specific legal rights. You may also have other rights that vary from state to state and country to country. This warranty is valid only in the United States, United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, Germany and Mexico. For warranty terms in other countries, please consult your local distributor

Safety Notes

These Safety Notes include important information about installation, use, and maintenance.

• The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 16.4 ft (5 m) is not expected.
• If the external flexible cable or cord of this luminaire is damaged, it shall be replaced by a special cord or cord exclusively available from the manufacturer or his service agent.
• The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
• The luminaire is intended for professional use only.
• DO NOT open this product. It contains no user-serviceable parts.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.
• DO NOT look at the light source when the product is on.
• CAUTION: This product’s housing may be hot when lights are operating. Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
• DO NOT leave any flammable material within 20 cm of this product while operating or connected to power.
• CAUTION: When transferring product from extreme temperature environments, (e.g., cold truck to warm humid ballroom) condensation may form on the internal electronics of the product. To avoid causing a failure, allow product to fully acclimate to the surrounding environment before connecting it to power.
• USE a safety cable when mounting this product overhead.
• DO NOT submerge this product (IP65). Regular outdoor operation is fine.
• Not for permanent outdoor installation in locations with extreme environmental conditions.
• DO NOT operate this product if the housing, lenses, or cables appear damaged.
• DO NOT connect this product to a dimmer or rheostat.
• ONLY connect this product to a grounded and protected circuit.
• ONLY use the hanging/mounting bracket to carry this product.
• In the event of a serious operating problem, stop using immediately.
• The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at higher temperatures.
• The minimum startup temperature is -4°F (-20°C). Do not start the product at lower temperatures.
• The minimum ambient temperature is -22°F (-30°C). Do not operate the product at lower temperatures.

FCC Compliance

This device complies with Part 15 Part B of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Contact
Outside the U.S., U.K., Ireland, Benelux, France, Germany, or Mexico, contact your distributor to request support or return a product. Refer to Contact Us at the end of this QRG for contact information.

What is Included

• Rogue Outcast 3 Spot
• Seetronic Powerkon IP65 power cord
• omega brackets with mounting hardware
• Quick Reference Guide

AC Power
This product has an auto-ranging power supply that can work with an input voltage range of 100–240 VAC, 50/60 Hz.

Power Linking
It is possible to link up to 2 Rogue Outcast 3 Spot products at 100 V, 3 products at 120 V, 5 products at 208 V, 6 products at 230 V, or 6 products at 240 V. Never exceed this number. Power linking cords can be purchased separately.

AC Plug

To eliminate unnecessary wear and improve its lifespan, during periods of non- use completely disconnect the product from power via breaker or by unplugging it.

Replacing the Fuse

1. Disconnect the product from power.
2. Using a flat head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove blown fuse and replace with a good fuse of the same type and rating.
4. Screw the fuse holder cap back in place and reconnect power.

DMX Linking

The Rogue Outcast 3 Spot will work with a DMX controller using a 5-pin DMX serial connection. A DMX Primer is available from www.chauvetprofessional.com.

DMX Connection

The Rogue Outcast 3 Spot uses a 5-pin DMX data connection for its DMX personalities: 20CH and 25CH. See the User
Manual for information about connecting and configuring the product for DMX operation.

RDM (Remote Device Management)

Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally along existing DMX cabling. Check the DMX controller’s User Manual or with the manufacturer as not all DMX controllers have this capability. The Rogue Outcast 3 Spot supports RDM protocol that allows feedback to make changes to menu map options. Download the User Manual from www.chauvetprofessional.com for more details.

Mounting

Before mounting this product, read the Safety Notes. Use at least 2 mounting points per product. Make sure the mounting clamps are capable of supporting the weight of the product. For our Chauvet line of mounting clamps, go to http://trusst.com/productcategory/truss-clamps.

Mounting Diagram

Control Panel Description

Button Function

• : Exits from the current menu or function
• : Enables the currently displayed menu or sets the currently selected value into the selected function
• : Navigates upwards through the menu list or increases the numeric value when in a function
• : Navigates downwards through the menu list or decreases the numeric value when in a function

Menu Map

Refer to the Rogue Outcast 3 Spot product page on www.chauvetprofessional.com for the latest menu map

Run Mode

| DMX| 20CH| Selects the DMX personality
25CH
Auto Test| Auto test all functions

Manual Test

| Pan Pan Fine

Tilt Tilt Fine P/T Speed Dimmer

Dimmer Fine Shutter

Virtual Shaking Color1 Color2 Gobo2 Gobo

Gobo Rotate Gobo Index Gobo2 Focus Focus Fine Auto Focus Zoom

Zoom Fine Prism

Prism Rotate Iris

Frost

Special Function

|

0–255

|

Manually control and test all settings through the control panel

Setup

| Pan Reverse| NO| Normal pan
YES| Reversed pan
Tilt Reverse| NO| Normal tilt
YES| Reversed tilt

Screen Reverse

| NO| Normal screen display
YES| Inverted screen display
AUTO| Automatic screen orientation

Pan Angle

| 540| 540° pan range
360| 360° pan range
180| 180° pan range

Tilt Angle

| 270| 270° tilt range
180| 180° tilt range
090| 90° tilt range
BL.O.P/T Move| NO| Enable/disable blackout while panning/ tilting
YES
Main Level| Programming Levels| Description
---|---|---

Setup

(cont.)

| BL.O.

ColorMove

| NO| Enable/disable blackout while color wheel is moving
YES
BL.O.

GoboMove

| NO| Enable/disable blackout while gobo wheels are moving
YES

Backlight Timer

| 30S| Display turns off after 30 seconds
1M| Display turns off after 1 minute
5M| Display turns off after 5 minutes
ON| Display stays on
Swap XY| NO| Do not swap pan and tilt
YES| Pan controls tilt, tilt controls pan
Loss of Data| Hold| Holds last signal received
Close| Blacks out fixture

Fans

| Auto| Fan speed set by product temperature
ECO| Quiet mode
Full| Fan speed set on high

Dimmer Curve

| Linear|

Set the dimmer curve

Square
I Squa
SCurve
Linear2

PWM Option

| 600Hz|

Sets the PWM frequency

1200Hz
2000Hz
4000Hz
6000Hz
15000Hz
USB Update| NO| Update firmware via USB C
YES

Reset

| Pan/Tilt|

NO YES

|

Reset individual functions or all functions from start-up

Prism
Color/Iris
Gobo/Gobo2
Frost
All
Factory Set| NO| Reset to factory default settings
YES

Sys Info

| Ver| V_| Shows firmware version
Running Mode| _| Shows current running mode
DMX Address| _| Shows current DMX address
Temperature| _| Shows the product temperature in °C
Fixture Hours| _| Shows time product has been on
LED Hours| _| Shows time LED has been on
UID| | Shows UID information
_Fan __ (x3)| _| Shows speeds of fans
Base Fan1| _| Shows speed of base fan

DMX Values

077 ó 145

| Synchronized strobe, slow to fast

Pulse strobe, slow to fast

 |  |  | 146 ó 215| Random strobe, slow to fast
 |  |  | 216 ó 255| On
 |  |  | 000 ó 001| No function
8| 9| Virtual shaking| 002 ó 128| Shaking effect, slow to fast
 |  |  | 129 ó 255| Fade effect, slow to fast
 |  |  | 000 ó 006| Open
 |  |  | 007 ó 013| Yellow
 |  |  | 014 ó 020| Light blue
 |  |  | 021 ó 027| Green
 |  |  | 028 ó 034| Red
9| 10| Color wheel 1| 034 ó 041

042 ó 048

| Magenta

Dark blue

 |  |  | 049 ó 059| Orange
 |  |  | 060 ó 187| Color wheel indexing
 |  |  | 188 ó 219| Color scroll, fast to slow
 |  |  | 220 ó 223| Stop
 |  |  | 224 ó 255| Reverse color scroll, slow to fast
 |  |  | 000 ó 006| Open
 |  |  | 007 ó 013| CTO 3200K
 |  |  | 014 ó 020| CTO 5600K
 |  |  | 021 ó 027| Green
 |  |  | 028 ó 034| UV
10| 11| Color wheel 2| 034 ó 041

042 ó 048

| Orange

Pink

 |  |  | 049 ó 059| Light blue
 |  |  | 060 ó 187| Color wheel indexing
 |  |  | 188 ó 219| Color scroll, fast to slow
 |  |  | 220 ó 223| Stop
 |  |  | 224 ó 255| Reverse color scroll, slow to fast
20CH| 25CH| Function| Value| Percent/Setting
---|---|---|---|---

11

| ****

12

| ****

Gobo wheel 1

(see Gobo Wheels)

| 001 ó 007

008 ó 015

016 ó 023

024 ó 031

032 ó 039

040 ó 047

048 ó 055

056 ó 063

064 ó 071

072 ó 079

080 ó 087

088 ó 095

096 ó 103

104 ó 111

112 ó 119

120 ó 127

128 ó 191

192 ó 255

| Open Gobo 1

Gobo 2

Gobo 3

Gobo 4

Gobo 5

Gobo 6

Gobo 7

Gobo 7 shaking, slow to fast Gobo 6 shaking, slow to fast Gobo 5 shaking, slow to fast Gobo 4 shaking, slow to fast Gobo 3 shaking, slow to fast Gobo 2 shaking, slow to fast Gobo 1 shaking, slow to fast Open

Gobo scroll, slow to fast

Reverse gobo scroll, slow to fast

12

| ****

13

| ****

Gobo wheel 1 rotate

| 000 ó 063

064 ó 145

146 ó 149

150 ó 231

232 ó 255

| Gobo index Rotation, fast to slow Stop

Reverse rotation, slow to fast

Alternating clockwise/counterclockwise rotation, short to long

–| 14| Fine gobo rotation| 000 ó 255| Fine control (16-bit)

13

| ****

15

| ****

Gobo wheel 2

(see Gobo Wheels)

| 000 ó 005

006 ó 011

012 ó 017

018 ó 023

024 ó 029

030 ó 035

036 ó 041

042 ó 047

048 ó 053

054 ó 063

064 ó 069

070 ó 075

076 ó 081

082 ó 087

088 ó 093

094 ó 099

100 ó 105

106 ó 111

112 ó 117

118 ó 127

128 ó 191

192 ó 255

| Open Gobo 1

Gobo 2

Gobo 3

Gobo 4

Gobo 5

Gobo 6

Gobo 7

Gobo 8

Gobo 9

Gobo 9 shaking, slow to fast Gobo 8 shaking, slow to fast Gobo 7 shaking, slow to fast Gobo 6 shaking, slow to fast Gobo 5 shaking, slow to fast Gobo 4 shaking, slow to fast Gobo 3 shaking, slow to fast Gobo 2 shaking, slow to fast Gobo 1 shaking, slow to fast Open

Gobo scroll, slow to fast

Reverse gobo scroll, slow to fast

14| 16| Focus| 000 ó 255| 0–100%
20CH| 25CH| Function| Value| Percent/Setting
---|---|---|---|---
–| 17| Fine focus| 000 ó 255| Fine control (16-bit)

–

| ****

18

| ****

Auto focus

| 000 ó 010

011 ó 030

031 ó 050

051 ó 070

071 ó 090

091 ó 110

111 ó 130

131 ó 150

151 ó 170

171 ó 190

191 ó 210

211 ó 255

| No function 0-5 meters

6   meters

7   meters

8   meters

9   meters

10  meters

12.5 meters 15 meters

17.5 meters 20-60 meters

Auto detect distance

15| 19| Zoom| 000 ó 255| 0–100%
–| 20| Zoom fine| 000 ó 255| Fine control (16-bit)
16| 21| Prism| 000 ó 004

005 ó 255

| No function

Prism insert

17

| ****

22

| ****

Prism rotate

| 000 ó 127

128 ó 189

190 ó 193

194 ó 255

| Prism index

Clockwise rotation, fast to slow Stop

Counterclockwise rotation, slow to fast

18

| ****

23

| ****

Iris

| 000 ó 063

064 ó 127

128 ó 191

192 ó 255

| Big to small

Auto change, slow to fast

Slow open, fast close, slow to fast Fast open, slow close, slow to fast

19| 24| Frost| 000 ó 255| 0–100%
20CH| 25CH| Function| Value| Percent/Setting
---|---|---|---|---

20

| ****

25

| ****

Control

(3 second hold)

| 000 ó 007

008 ó 015

016 ó 023

024 ó 031

032 ó 039

040 ó 047

048 ó 055

056 ó 095

096 ó 103

104 ó 111

112 ó 119

120 ó 127

128 ó 135

136 ó 143

144 ó 151

152 ó 159

160 ó 167

168 ó 175

176 ó 183

184 ó 191

192 ó 199

200 ó 215

216 ó 255

| No function

Blackout during pan/tilt

Blackout while color wheels are moving Blackout while gobo wheels are moving Blackout during pan/tilt/color wheel Blackout during pan/tilt/gobo wheels

Blackout during pan/tilt/color wheel/gobo wheels No function

Pan reset Tilt reset

Color wheels reset Gobo wheels reset No function

Prism reset No function All reset Iris reset Frost reset Zoom reset Fan ECO Fan Full Fan Auto

No function

Gobo Wheels

Documents / Resources

| CHAUVET PROFESSIONAL Rogue Outcast 3 Spot Compact IP65 LED Moving Head [pdf] User Guide
Rogue Outcast 3 Spot, Compact IP65 LED Moving Head, Rogue Outcast 3 Spot Compact IP65 LED Moving Head, IP65 LED Moving Head, LED Moving Head, Moving Head
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>