Danale DA_H1 Indoor Security Camera User Guide
- June 12, 2024
- Danale
Table of Contents
DA_H1 Indoor Security Camera
User Guide
How to connect Danale App
Sept 1 – Download Danale App
Get “Danale” from App store or by scanning the QR code below.
Note: Please select the Blue “Danale” not brown one
|
---|---
https://dl2.danale.com/g132d9/getapp|
https://www.youtube.com/watch?v=lZDfzR6msJs
Sept 2-Log In
Open the App, and log in with your Danale ID, if you don’t have an account,
create one first. 
Sept 3- Add Your Camera
Tap the “Add Device” in the App and select your camera. 
Sept 4- Configure Camera
Follow app instructions to configure your camera and add it to your home network.
-
Power on your camera
-
Press the button for 6 seconds before connecting it
-
Connect you home network(Note: only support 2.4GHz Wi-Fi network)
Sept 4- Configure Camera
Follow app instructions to configure your camera and add it to your home network. -
Connect the camera (2 ways for choose)
Way 1: Scan the QR code at the bottom of the camera
Way 2:
Input the PIN code at the bottom of the camera
Sept 4- Configure Camera
Follow app instructions to configure your camera and add it to your home
network.
4 Connect device Wi-Fi
Select characters starting with Danale-xxxx-xxxx(Note: Please wait the device
Wi-Fi to connect successfully and then back to Danale App, or it may fail to
connect )
Sept
4- Configure Camera
Follow app instructions to configure your camera and add it to your home
network.
(5)Connect to your network
(6)Rename your device
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>