OSD Black BK-R82SM 6.5 Weather-Resistant in-Ceiling Speaker Installation Guide
- June 4, 2024
- OSD BLACK
Table of Contents
OSD Black BK-R82SM 6.5 Weather-Resistant in-Ceiling Speaker
Preparation
Tools for Installation
- Pencil
- Drill
- Tape Measure
- Wire Cutter
- Phillips Screwdriver
- Utility Knife
- Safety Eye Wear
- Gloves
- Sandpaper
Speaker Wire Guide
- 18AWG minimum – for distances up to……10 ft
- 16AWG – from…… 10 to 50 ft.
- 14AWG – from…… 50 to 100 ft.
Considerations
- Where is the best place to install the speakers?
- Where do the speakers sound the best?
- Separate the speakers 6 – 10 feet apart.
- (For Ceiling LCR models only) Place speakers with the 15°angled woofer pointed towards the main listening area.
- If you intend to paint the grilles, do so before installation.
Placement
There are many options for proper speaker placement depending upon speaker
type and application. It’s important to carefully plan the placement of your
speakers, as installation requires that you cut a hole in your wall or
ceiling. Typical speaker placement for a 5.1 and 7.1 speaker system.
Installation
Cut Out
NOTE: This is the most important part of the entire installation. If you are not certain whether any obstructions exist behind the desired mounting area, you should start by cutting a small hole in the center of your penciled mounting hole with a drywall saw.
Trace along the included template. Cut along the traced line using a drywall
saw or rotary drill. Use a piece of sandpaper to sand down the cut out edge
for a smoother contour.
Mounting
Tighten the mounting brackets by simply turning the screws on the front of the
speaker baffle slowly clockwise. The quick-turn mounting system and frame will
“sandwich” or clamp around the dry-wall to hold the speaker securely in place
once fully tightened to the locked position.
Connection
When connecting any speakers to the amplifier or receiver, always make sure
the power is off. Locate the connection terminals on the back of your receiver
or amplifier. Always make sure to connect audio out from the back of your
receiver or amplifier to the speakers.
NOTE: Not all Amplifier/Receivers can safely play more than one pair of speakers at once. Please refer to your owner’s manual for impedance and wattage compatibility.
Adjustment
On select models ( *Performance, Reference ) of OSD Black Series, a front mounted 3 position ±3dB treble contour switch can be used to tailor high frequencies according to speaker placement or the listeners preference. Excludes Shallow Mount Series
Pivoting Tweeter
Your Black series speaker comes from the factory with the tweeter centered in
the neutral position. This will provide the smoothest response. However,
select models come with a pivoting tweeter so you can focus the sound directly
towards the listening area if needed. In order to do this, carefully press on
the edge of the tweeter baffle in the direction you wish to focus the sound
.
CAUTION: When adjusting the pivoting tweeter be sure not to touch the dome as you may cause damage to the speaker.
SPECIFICATIONS
-
Model
R62 SM
-
Description
Performance Shallow Mount Weather Resistant Ceiling Speaker -
Woofer
8” PP Cone -
Tweeter
1” PEI Dome -
Freq Response
70-20K -
Power
100W -
Sensitivity
88 dB -
Impedance
8 ohm -
Dimensions
Depth
3.1”
Cut Out
9.4″
NOTE: All specification and dimensions are subject to change without notice.
WARRANTY
All Optimal Speaker Design speaker products have Limited Lifetime Warranty against defects in materials and workmanship. Proof of purchase must accompany all claims. During the warranty period Optimal Speaker Design will replace any defective part and correct any defect in workmanship without charge for either parts or labor Optimal Speaker Design may replace returned speaker with a product of equal value and performance. In such cases, some modification to the mounting may be necessary and are not Optimal Speaker Designs responsibility.
For this warranty to apply, the unit must be installed and used according to its written instructions. If necessary, repairs must be performed by Optimal Speaker Design. The unit must be returned to Optimal Speaker Design at the owner’s expense and with prior written permission. Accidental damage and shipping damage are not considered defects, nor is damaged resulting from abuse or from servicing performed by an agency or person not specifically authorized in writing by Optimal Speaker Design
Optimal Speaker Design sells products only through authorized dealers and distributors to ensure that customers obtain proper support and service. Any Optimal Speaker Design product purchased from an unauthorized dealer or other source, including retailers, mail over dealers and on-line sellers will not be honored or serviced under existing Optimal Speaker Design warranty policy. Any sale of product by an unauthorized source or other manner not authorized by Optimal Speaker Design shall void the warranty on the applicable product.
Damage to or destruction of components due to application of excessive power voids the warranty on those parts. In these cases, repairs will be made on the basis of the retail value of the parts and labor. To return for repairs, you must email customer service at RMA@audiogeargroup.com for a Returned Merchandise Authorization (RMA) number# then the unit must be shipped to Optimal Speaker Design at the owner’s expense, along with a note explaining the nature of service required. Be sure to pack the speaker(s) in a corrugated container with at least 3 inches of resilient material to protect the unit from damage in transit.
This Warranty Does Not Cover: Damage caused by abuse, accident, misuse, negligence, or improper operation (installation)
- Any products that have been altered or modified
- Any product whose identifying number of decal, serial #, etc. has been altered, defaced or removed
- Normal wear and maintenance.
FAQs
Do the ceiling speakers need to be covered?****
Yes. If a back box is not placed, the sound quality of your in-ceiling speakers will be diminished, and this will result in noise pollution in other areas of your home.
How do the speakers in the ceiling work?****
No, ceiling speakers normally perform as passive speakers, which means they are driven by speaker wires connected to an external amplifier because they lack inbuilt amplifiers. To do this, the binding posts on the amplifier are linked to each ceiling speaker.
Are ceiling speakers a good idea?****
The majority of budget-friendly ceiling speakers provide excellent sound and value for the money. So if you’re trying to upgrade your home audio while keeping to a strict budget, you don’t need to worry about it taking up your entire budget.
How are televisions and ceiling speakers connected?****
Right now, it’ll probably be a digital optical output. By putting in an analogue wire from your TV to the amplifier and switching to line output on your TV, you may enjoy TV sound through your ceiling speaker system.
How effectively do the ceiling speakers play music?****
In fact, ceiling speakers are great for playing music. They are capable of giving you an immersive surround sound experience similar to what you may enjoy at a concert or live music performance.
How can I attach my amplifier to the speakers in my ceiling?****
Drill a hole for the wires.
Check to see that the amplifier is unplugged, then shut off the breaker.
Install the wiring.
Start connecting the wires to the terminals on the ceiling speakers.
Connect the wires’ other side to the terminals of the amplifier.
Start your breaker and give it a try.
Does a subwoofer have to be used with ceiling speakers?****
A subwoofer will be useful in handling the bass and low-end frequencies even if ceiling speakers are capable of providing all of them. Additionally, it vastly enhances your sound system’s overall sound quality.
Do in-ceiling speakers work with surround sound?****
Thank you for your inquiry. Naturally, the answer is “yes.” Simply point your in-ceiling stereo speakers in the desired location before configuring your system to offer that immersive additional layer of sound.
What difference do speakers in the ceiling make?****
Ceiling speakers are a great addition to a home theatre if you want a more immersive audio experience. They are a fantastic addition to a surround sound system even if they have to be manufactured specifically for ceilings.
How can insulation around ceiling speakers be protected?****
The only option you have for blown-in insulation is a speaker box. It is also the best option for keeping your house insulated because the speaker box can be covered with insulation to retain sound quality.
What is the operation of Bluetooth in-ceiling speakers?****
A smartphone or other internet-connected device is frequently used to wirelessly control Bluetooth ceiling speakers. The content from the smartphone will be received by the speaker’s Bluetooth chip and played through the speaker.
How far apart should my ceiling speakers be placed?****
As a general rule, if your room is a typical square or rectangle, make sure they are situated evenly apart and down the centre of the room (preferably at least 4 feet).
Can a subwoofer be installed in the ceiling?****
The number of surfaces (walls, ceilings, and floors) that a speaker is placed close to determines how much bass you hear. An in-ceiling subwoofer mounted in the centre of a wall (or ceiling) will acquire 3dB of bass if it is moved up the wall (across the ceiling) and placed next to the ceiling (wall).
Is it possible to install speakers on the wall or the ceiling?****
In-ceiling speakers can be installed in walls and provide a sound that is quite similar to that of in-wall speakers. The major difference you’ll notice is size. In-wall speakers are typically larger than in-ceiling speakers.
Can the ceiling be used to place a centre channel speaker?****
Depending on the height of your ceiling, you can position the centre there. This can work reasonably well as long as the speaker isn’t too far away from the TV and is directed toward the listening position, as we previously discussed. Another option for your centre channel is to use an in-ceiling speaker.