SCANAVENGER SA1100 Wireless Barcode Scanner User Guide
- September 12, 2024
- ScanAvenger
Table of Contents
SA1100 Wireless Barcode Scanner
User Guide
Troubleshooting your scanner
Some barcode types are disabled by default. For more information, please refer
to the Full User Manual or email us at
helpdesk@scanavenger.com
Scan in your browser for the full user manual
https://scanavenger.com/wp-content/uploads/manuals/ScanAvenger-Full-User- Manual-1D-2D.pdf
In order to correctly use the barcode scanner, please read the instructions
carefully. It is advisable to keep this manual for future reference.
If at any stage you accidentally scan configuration codes and the scanner
stops working, please email us at
helpdesk@scanavenger.com for the full reset
process.
Important Note:
Please don’t use Fast Charging AC adapters to charge your scanner, as this may
shorten the lifespan of its buit-in battery.
Led & Buzzer
| LED Light | Description |
|---|---|
| Blue LED ON | Scanner ON and paired |
| Red LED ON | Charging |
| No light ON | Scanner not paired to any de device |
| Buzzer | Description |
| --- | --- |
| A long beep | Power ON/OFF |
| A short beep (low frequency) | Scan common barcode, paired, or wireless |
connection success
5 short beeps (low frequency) and stop scanning| Battery without electricity
3 short beeps (low frequency)| Wireless disconnected
Mini Scanner LED Light
Smart Light Signaling
- Small and Medium lights turn on when scanner is on
- Large light turns on when the scanner is connected.
- Medium light flashes once when successfully reading a barcode.
To correctly use the barcode scanner, please read the instructions carefully.
It is advisable to keep this manual for future reference. No part of this
publication may be reproduced or distributed in any form without written
permission from ScanAvenger.
ScanAvenger reserves the right to make the final interpretation of the above
statement. If you come across any issues with your product, please contact us
via email at helpdesk@scanavenger.com
When contacting our helpdesk please make sure to mention your order number and
scanner model.
| Scanner type | CMOS |
|---|---|
| Light source | Red Light LED 525 ±10nm |
| CPU | 32-bit |
| Resolution | 640*480 |
| Resolution | 1D≥3mil, 2D≥8.7mil@PCS90% |
| Decoding speed | 25CM/S |
| Depth of field | 10mm-500mm |
| Scan mode | Manual, Auto Sense |
| Scan angle | Roll ±360˚, Pitch ±60˚, Skew ±70˚ |
| Print contrast | ≥25% |
| Wireless | 2.4GHz = 150meters, Bluetooth |
| distance | 30meters (open distance) |
| Storage Battery | 16Mb |
| capacity | 2200 mAh (1200 mAH for SA1100) |
| Charging time | Approx. 3 hours |
| Continuous | ≥16 hours |
| working time | USB, Wireless 2.4G, Wireless |
| Communication | Bluetooth 4.2 |
| Power supply | DC 5V@200mA (work) |
| Operating temp | 0˚ C to 50˚C |
| Storage | -30˚C to 60˚C |
| Humidity Drop | 5% to 95% (non-condensing) |
| Height | 1.5mCE, |
| Certificate | FCC, RoHS |
How to connect the scanner using a USB
Wireless Dongle:
2.4G Mode – laptop/computer
- Power the scanner by pressing the button
- Insert the USB dongle into a USB port of your device
- Wait 30 seconds for devices to pair automatically.
For any issues connecting the scanner to the Wireless USB
Dongle please follow the below troubleshooting steps:
-
Unplug USB Dongle
-
Scan the below barcode:
-
Scan below barcode
-
Plug the USB Dongle back into the computer and test again. A blue light on the scanner should turn on, indicating that your scanner is connected to the dongle.
-
If the scanner is in Bluetooth Mode and you want to revert back to the previously connected dongle, all you need to do is scan the 2.4G Mode barcode above.
To test, open a Word document or notes and try scanning a normal barcode (not a configuration barcode from the user guide). If you have any questions about setting up or configuring the scanner please email us at helpdesk@scanavenger.com Our helpdesk operates 24/7 – 365 days a year.
How to connect the scanner via Bluetooth to a mobile phone, tablet, or other Bluetooth devices- Scan:
- Scan:
- Scanner light will be flashing blue. This means you can Connect it to your mobile device. On your mobile/tablet go to Bluetooth devices, search for “ScanAvenger HID” and click PAIR.
- Scanner light will turn solid blue indicating the scanner is connected to your device. Remember you can turn ON/ OFF your mobile phone/tablet keyboard by double tapping the scanner button.
-
If the scanner is in Dongle Mode, and you want to revert back to the previously connected Bluetooth device, all you need to do is scan the Bluetooth Mode barcode above.
If for whatever reason you are having Bluetooth connectivity issues, we recommend you remove the scanner from your Bluetooth devices on your mobile and go through the above steps again. For Bluetooth SPP and BLE Modes please contact us at Helpdesk.
To test, open a word document or notes and try scanning a normal barcode (not a configuration barcode from the user guide). If you have any questions about setting up or configuring the scanner please email us at helpdesk@scanavenger.com
Our helpdesk operates 24/7 – 365 days a year.
Trigger Modes
There are two different trigger modes: Sleep Time Settings**
%%SpecCode33 %%SpecCodeBA180168 %%SpecCode36 %%SpecCode38
Sound Settings
%%SpecCode94 %%SpecCode95 %%SpecCode97
Inverse Barcodes
Inverse barcodes are barcodes that have white lines on black background. The
scanner is configured by default to not read them. Language Settings
%%SpecCode40 %%SpecCode42 %%SpecCode41 %%SpecCode43
Configuring your scanner to automatically hide characters
Note: This method can only hide up to 4 characters.
Please check the extended user manual, or email us at helpdesk@scanavenger.com
for more details.
Follow the steps below to configure your scanner to hide characters:
- Chose if you want to hide from the back or front.
%%SpecCodeA0
Hide Front of Barcode digits (read the same barcode to revert to normal)
%%SpecCodeA1
Hide Back of Barcode digits (read the same barcode to revert to normal)
Chose how many characters you wish to hide (Scan only 1 barcode)
%%01 %%02
%%03
For an extended user manual or any questions, please email us at
helpdesk@scanavenger.com
StorageMode
Once your scanner had been set to Storage mode, each time you scan a barcode,
it will be stored in its internal memory. To upload all the stored barcodes,
simply scan the barcode below:
%%SpecCode11 %%SpecCode16
If you need to clear all the stored data, you simply need to scan the barcode below:
%%SpecCode18
If you wish to exit Storage Mode, scan the barcode below:
%%SpecCode10
To fully reset the scanner to factory settings, email us at helpdesk@scanavenger.com with your scanner’s model number for instructions.
Frequently Asked Questions
1. Can it automatically open a website page, after scanning a QR Code?
The basic idea is that the scanner acts as an automatic keyboard. You have to click where you want the data to be written. Each time you scan a barcode, it will transmit the data as if you would be typing on a keyboard. Your devices will recognize the scanner as a keyboard. Please note that this will not impact your keyboard's functionality.
2. When trying to scan, my scanner makes multiples beeps, without outputting anything. Why does this happen?
The number of beeps and the LED on the back of your scanner will help you identify why this is happening. The most common issues being: • 3 beeps and flashing LED - your scanneer is not connected to your device. To fix this, please follow the Dongle/Bluetooth Pairing from this Quick User Guide. • 5 beeps and stops scanning (shuts down) - your scanner is out of battery. Please charge your scanner and try again.
3. Will ScanAvenger barcode scanners work with any Inventory Management Software?
Your ScanAvenger barcode scanner will work with most Inventory Management Software. That being said, some Inventory Management Software developers restrict what barcode scanners will work. We recommend checking their website for more information
If you need any assistance,
please do not hesitate to contact us at
helpdesk@scanavenger.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>