ALPHACOOL 25668 Core 6x 4-Pin PWM-DRGB Splitter Instruction Manual
- June 9, 2024
- ALPHACOOL
Table of Contents
ALPHACOOL 25668 Core 6x 4-Pin PWM-DRGB Splitter
Read the safety instructions before starting the installation.
Accessories
Safety instruction
Note
Switch off the computer. The power switch does NOT turn off the power supply
to the computer. To cut off the power supply to the computer, you must unplug
the power cord from the wall socket. Make sure the power cord is unplugged
before opening the computer chassis.
Mounting
Mount the distributor
- Remove the upper protective film of the adhesive tape and stick it under the Controller.
- Now remove the second protective film of the adhesive tape and stick the Controller to the computer case as shown. The Controller can be detached again through the Velcro layer.
Connect the cable
- Connect the 2 pin aRGB and 4 pin PWM cable to your motherboard aRGB/4pin fan output, ensure the aRBG output is a 3 pin terminal, and not 4 pin, as damage can result of improper connection.
- Connect the 2 pin aRGB IN and 4 pin PWM plug to the controller.
- Connect the SATA power plug from your power supply to the SATA power input of the controller. Ensure power is OFF during this process.
- Connect the 4 pin fans to the relevant sockets (OUT). Socket M1 is the tacho signal and must be populated first.
- Connect the 3 pin aRBG connectors to the relevant sockets
A maximum power consumption of 22.5W (4.5A) can be drawn from the controller.
ALPHACOOL INTERNATIONAL GMBH
MARIENBERGER STR. 1
D-38122 BRAUNSCHWEIG GERMANY
SUPPORT: +49 (0) 531 28874 – 0 FAX: +49 (0) 531 28874 – 22
E-MAIL:
INFO@ALPHACOOL.COM
GENERAL MANAGERS: ANDREAS RUDNICKI, FABIAN NOELTE
WEEE-REG.-NR.: DE 54464644
TRADE REGISTER: AMTSGERICHT BRAUNSCHWEIG HRB 202390
VAT.ID.NR.: DE270458421
TAX NUMBER: 13/207/02047
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>