OPTONICA 5027 LED Linear Suspended Light Instruction Manual
- June 9, 2024
- OPTONICA
Table of Contents
OPTONICA 5027 LED Linear Suspended Light
INSTALLATION INSTRUCTIONS
Hoisting mode
-
Turn off the main power switch
-
Take out the fitting and fix it on the wall.
-
Hoisting instruction
-
Shaped instruction
-
Turn on the main power switch and complete the installation.
Cautions
- Input voltage: 200-240VAC, 50Hz.
- Maximum rated power for linkable linear light is 1000W.
- Please cut off the power before installtion, maintenance and replacement.
- Please do not connect the power before the luminaries have been installed correctly.
- Please do not install luminaries on any damaged or deformed ceiling.
- Please cut off the power immediately if any exceptional cases happen,
and contact the professional engineer.
IMPORTER: Prima Group 2004 LTD, Bulgaria, 1784 Sofia, Mladost 1, bl. 144, Ground Floor; Phone: +359 2 988 45 72;
-
Turn off the main power switch
-
Take out the fitting and fix it on the wall.
-
Hoisting installation
-
Shaped installation
-
Turn on the main power switch and complete the installation. Cautions
Cautions
- Input voltage: 200-240VAC, 50Hz.
- Maximum rated power for linkable linear light is 1000W.
- Please cut off the power before installtion, maintenance and replacement.
- Please do not connect the power before the luminaries have been installed correctly.
- Please do not install luminaries on any damaged or deformed ceiling.
- Please cut off the power immediately if any exceptional cases happen, and contact the professional engineer.
IMPORTER: Prima Group 2004 LTD, Bulgaria, 1784 Sofia, Mladost 1, bl. 144, Ground Floor; Phone: +359 2 988 45 72;
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>