OPTONICA 9353 LED Solar Garden Lights User Manual
- June 9, 2024
- OPTONICA
Table of Contents
OPTONICA 9353 LED Solar Garden Lights
PACKAGE CONTENTS
The
above number of parts is the amount of one lamp. If there is a PACK set, the
number of parts will be a multiple of the above. *There is only 1 pc user
manual in each individual package.
INSTALLATION
Choose a place that can get enough sunshine to install the light, the more it gets sunshine, the longer it can illuminate.
Method 1: Ground Inserted
- Connect the main body and the base with a nut and a hand-tightened screw, but do not need to tighten too much.
- Connect the ground spike and the base with the light.
- Insert the whole spike into the ground vertically.
- Then, adjust the angle of main body and tighten the knob.
Method 2: Wall Mounted
- Punch 3 holes(diameter 6mm, depth 40mm) on the wall with a drill bit and insert the attached wall plugs into holes. Then, twist the screws through the screw holes of holder into the wall plugs.
- Adjust the angle, then tighten the holder and the light through the knob screw. Adjustable Angle: 150°
OPERATION GUIDE
The solar Landscape light can automatically detect surrounding brightness, it will not light up in the day, and it will automatically light up in darkness or at night. The default mode of the product is OFF. Press the back button to adjust modes when using the product.
For Mono-Color Temperature Model
(LED Color: 3000K)
It has 2 modes, You can adjust to a desired mode by pressing the back button.
-
LOW Light Mode:
Press the button for once. -
HIGH Light Mode:
On the basis of LOW Light Mode, press the button again.
Daytime
During the daytime or in a bright environment, if you want to test if it
works, just cover the solar panel with your hand (or your body, a book, etc.)
and turn on the switch.
Low Battery
When the battery is low, the brightness will automatically decrease, even in
HIGH Light Mode, It is normal and not damaged.
Battery Protection
When the battery is extremely low, it will enter the battery protection mode
and the solar Landscape light will stop working.
About Charging
No matter which mode the power button is in, if the sun is shining enough, the
solar panel will always charging until the battery is full.
APPLICATIONS
Perfect for patio, front porch, yard, garden, wall, driveway, pathway, attic, deck, etc.
FEATURES
Easy to install, waterproof and dust proof High quality polysilicon solar panel Can be used as a spike light or wall light Continuous dusk to dawn when full recharged Built-in smart battery management chip
SPECIFICATIONS
| SKU: | 9353 | Dimensions | 101x168x310 mm |
|---|---|---|---|
| Solar Panel | Polysilicon | Material | PC |
| Charging Time | 5-6 Hours | Battery | 3.7V/1800mAh Lithium Battery |
| LED Type | SMD 3528 | Working Time | Max. 15+ Hours |
| Surface Color | Matt Black | LED Q’ty | 13 Pcs |
| IP Class | IP65 | Color Temp. | 3000 K |
| Working Temp | -10~45℃ | Weight | 0.25 Kgs |
IMPORTANT:
- This is a solar powered light and must be installed where can get enough sunlight.
- Install in direct sunlight for best results.
- Recommended installation is facing South, with no shade or obstruction above the light.
- Keep it away from other light sources, such as street lights, corridor lights, etc. Because when the solar panel detects sufficient light from these light sources, it will mistakenly think it is daytime and the lamp will not work.
- Fallen leaves, built-up dirt or dust will affect the performance of solar charging. Please wipe off the debris gently on the solar panel with a damp cloth monthly.
When you get the light, the battery may be low due to natural discharge
BEFORE USING IT FOR THE FIRST TIME, PLEASE BE SURE TO CHARGE IT IN THE SUN FOR AT LEAST 8 HOURS!
IMPORTER : Prima Group 2004 LTD, Bulgaria, 1784 Sofia, Mladost 1, bl. 144, Ground Floor; Phone: +359 2 988 45 72;