beper P206ZAN020 Insect Killer Lamp User Manual

beper P206ZAN020 Insect Killer Lamp

Precautions

• Read the following instructions carefully, since they give you useful safety information about installation, use and maintenance and help you avoid mishaps and possible accidents.

• Remove the packing and make sure that the appliance is intact, with special attention to the supply cable.

• The elements of the packing (plastic bags, polystyrene, etc) do not have to be accessible to the children, in order to preserve them from danger sources. It is recommended not to throw these packing material in the domestic waste, but to deliver them to the appropriate station of collection or destruction refusals, asking eventually information
  to the manager of the Sanitation Department of your own municipality.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

• Before connecting the appliance make sure that the mains voltage corresponds to the data specified on the label.

• The appliance can be damaged if the voltage is not correct.

• If the plug does not suit the socket, let it be replaced with another suitable plug by qualified personnel only, which shall also ensure that the section of the socket cables is suitable for your appliance power absorption.

• Generally, the use adaptors multiple plugs and/or extensions is not recommended; should they be necessary, please use only simple or multiple adaptors and extensions in compliance with the safety rules in force, making sure that the capacity absorption limit marked on the simple adaptors and the extensions and the maximum power limit
  marked on the multiple adaptor are not exceeded.

• Do not use the appliance if the cable or the plug shows any damages.

• Do not use the appliance after a possible irregular working. In this case, switch it off and do not break it open. Refer to an authorized Beper after-sale service for repair and require original spare parts only. Failing to follow these instructions may impair the safety of your appliance.

• This appliance is to be destined to its special purpose only. Any other use is to be considered as improper and thus dangerous. The manufacturer
  cannot be responsible for any damages deriving from improper, wrong or incautious use

This appliance is for household use only

• To protect against electric shock, do not immerse cord, plug or any parts of the appliance into water or other fluids.
• Do not use the appliance near explosives, highly flammable materials, gases or burning flames.
• Do not allow children, disabled people or every people without experience or technical ability to use the appliance if they are not properly watched over.
• Close supervision is necessary when any appliance used by or near children.

Warning
Place the electric insect killer lamp on a stable surface, and in case you will decide to hang it take care to place it minimum at 240 cm high from the ground.

• Do not place the electric insect killer lamp on inflammable objects or near gas, smoke explosive substances or steam.
• Do not place the electric insect killer lamp near curtains, shower/ bath, swimming pool, or near any damp place; keep away from heat sources higher than 50°C. Do not expose the appliance to atmosphere agents ( rain, sun, etc.)
• Do not put your hands/fingers or any objects into the protection grid.
• Do not cover the electric insect killer lamp with fabric or others materials; that could be very dangerous and cause fire.
• If the appliance is wet, do not use it until it is completely dry.
• Do not touch the electric insect killer lamp with damp or wet hands.
• Do not pull on the supply cord to unplug the appliance.
• Always unplug the electric insect killer lamp if you need to move it, to clean it, to assembly or disassembly the appliance.
• Take care not to fold the metallic grid.

Product and accessories

Fig.A

1. Switch
2. Hanging chain
3. 2 Neon tube lights (10W)
4. Removable insect collecting tray

Use

• Place the insect killer lamp following and respecting the instructions specified in the paragraph above.
• If you intend to hang the appliance, mount the hanging chain by inserting the karabiners in the two hooks placed at the two side ends (be careful because the hooks must be raised).
• Insert the plug into a socket.
• Turn on the insect killer lamp by setting the switch to “I”.
• The neon lamps will light up and in this way the insects will be attracted by the UV-light emitted, will fly towards the metal grid in tension inside the appliance , remaining fulminated. Fulminated insects will fall into the insect collecting tray.
• At the end of its use, switch off the insect killer lamp by setting the switch to “0”.

Cleaning and care

• Before proceeding with any cleaning and/or maintenance operation, switch off the appliance and disconnect the plug from the power outlet.
  Remove the insect collecting tray. Empty it and wash it using soapy water. Dry the tray thoroughly before replacing it.
  Gently clean the internal metal grid with a soft brush to remove any fulminated insects. Clean the outside grill using a slightly damp soft cloth.

• Do not use metal objects to clean the internal grid, in order to avoid damaging it.

• Do not immerse the appliance in water and/or other liquids.

• Make sure all parts are completely dry before switch on the appliance again.

Replace UV neon lamps

• To replace the UV neon lamps, follow this procedure:
• Switch off and unplug the appliance .
• With the help of a cross-head screwdriver, remove the four screws located on the top of the grid of insect killer lamp.
• Remove the two outer protection grids.
• Replace the tubes.
• Reassemble the insect killer lamp .
  Attention: Make sure that the technical characteristics of the new neon lights have the same characteristics as the exhausted ones.

Technical data

• Power: 20W
• Power supply: 220- 240V ~ 50/60Hz
  For any improvement reasons, Beper reserves the right to modify or improve the product without any notice
  The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance, it must be separately collected.

GUARANTEE CERTIFICATE

This appliance has been checked in the factory. From the date of original purchase a 24 month guarantee ap-plies to material and production defects. The purchase receipt and the guarantee certificate must be submitted together in case of claim to guarantee.
The guarantee is valid only with a guaranty certificate and proof of purchase (fiscal receipt) indicating the date of purchase and the model of the appliance
For any technical assistance, please contact directly the seller or our head office in order to preserve the applian-ce’s efficiency and NOT TO void the guarantee. Any intervention on this appliance by non-authorized persons will automatically void the guarantee.

GUARANTEE CONDITIONS

If the appliance shows defects as a result of faulty material and/or production during the period of guarantee, we guarantee repair free of charge on condition that:

• The appliance has been used properly and for the purpose for which it has been intended.
• The appliance has not been tampered with, otherwise it is not maintainable.
• The purchase receipt shall be presented.
• The appliance showing a fair wear and tear shall not be covered by this guarantee.

Therefore, any part that could be accidentally broken or having visible signs of use in consumable products (such as lamps, batteries, heating elements…) the aesthetic parts are excluded from the guarantee, and any defect whatsoever resulting from non-respect of the rules for use, negligence in usage and/or maintenance of the appliance, carelessness, wrong or improper installation, damage during transport and any other damage not attributable the supplier.
For every defect that could not be repaired within the guarantee period, the appliance will be replaced free of charge.
In any case, if the part to be replaced for defect, breakage or malfunction is an accessory and/or a detachable part of the product, Beper reserves the right to replace only the very part in question and not the entire product
Contact your distributor in your country or after sales department Beper.
E-mail assistenza@beper.com which will forward your enquiries to your distributor.

YOU MIGHT ALSO LIKE

YOU MIGHT ALSO LIKE

CUSTOMER CARE BEPER

BEPER SRL
Via Salieri, 30 – 37050 – Vallese di Oppeano – Verona Tel. 045/7134674 – Fax 045/6984019 beper.com

References

• Home - Beper

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>