Rubicson 24320 Karaoke Speakers User Manual
- June 9, 2024
- rubicson
Table of Contents
Rubicson 24320 Karaoke Speakers User Manual
OVERVIEW
- Handle
- Volume -/previous track
- Play/pause
- Power on/off/source
- Volume +/next track
- LED light on/off/effects
- LED indicator
- 3.5 mm AUX port
- Micro SD card slot
- Charging indicator
- USB-C charging port
- Power on/off/mute
- Volume +/echo effect
- Volume –
- Voice effect on/off/effect
- Charging indicator
- USB-C charging port
Specifications
Output power (RMS): 2x 4W
Light effects: 10 LED modes, 7 LED colors
Voice effects: 4 effect modes
Inputs: Bluetooth, 3.5mm audio cable, Micro SD card (up to 64 GB)
Note! Micro SD card require MP3 files (FAT32).
Connectors: USB-C for charging, 3.5 mm AUX in, Micro SD card slot
Bluetooth version: 5.1
Speaker playtime, LED on/off: Up to 5 h/6.5 h (at 70% volume) Battery
time, microphone: Up to 100 h
Charging input: DC 5 V/1 A. Charger is sold separately.
Charging time: Approx. 4.5 h
Size : Speaker: 113x113x146 mm Microphone: 0 36×125 mm Weight
Speaker: 690 g
Microphone: 82 q
Wireless frequency: 2402-2480 Mhz
Transmission power: 20 mW (Max.)
Included:
Karaoke speaker, 2x wireless microphones, USB-C charging cable (50 cm), 3.5 mm
audio cable (50 cm), manual.
Use
Charging Speaker. Connect the included USB-C cable to the speaker’s USB-C charging port (11) and a USB•C charger that you plug into a wall socket. The charging indicator (10) lights up red and turns off when the speaker is fully charged. Charge the speaker fully before first use. If the speaker has not been used for over 7 days, charge it for 20 minutes before using it again. The speaker emits a sound to indicate battery power is low and needs to be recharged.
Microphone: Connect the included USB-C cable to the microphone’s USB-C charging port Ill) and a USB charger that you plug into a wall socket The charging indicator (16) lights up red and turns off when the microphone is fully charged.
Power on/off
Press and hold the Power on/off button (4) on the speaker to turn it on. Press
and hold the Power on/off buttons (12) on the microphones to turn them on.
Press and hold the Power buttons on the speaker and microphones to turn them
off. The microphones connect to the speaker automatically.
Selecting audio source
The speaker can play audio from 3 different sources: a Bluetooth device, a
Micro SD card and an audio source connected to the speaker via cable and the
AUX in connector. The speaker automatically selects the source currently
playing audio. If you want to manually change audio source, press the the
Source button (4) multiple times.
Bluetooth device and pairing
Turn on the speaker, the LED indicator (7) lights up blue and starts flashing,
The speaker automatically enters Bluetooth pairing mode. Open the Bluetooth
settings on your smart device and connect to ‘Bubicson M15’. A sound is
emitted from the speaker to confirm that the connection was successful. The
speaker automatically connects to the last paired smart device the next time
it is powered on. Triple press the Play/pause button (3) on the speaker to
disconnect the current device connected via Bluetooth. The LED indicator (7)
starts flashing blue and the speaker automatically enters pairing mode again.
Note! Make sure not to point the microphone at the speaker, and keep the
distance between speaker and the microphone further than 2 meters to avoid the
risk of audio feedback.
Micro SD card as an audio source
Insert a Micro SD card into the card slot (9). The music starts playing
automatically provided that the card has been formatted to FAT32 and contains
MP3 files. Control the music by using the speaker controls. ISee “Speaker
controls’) Notel Only MP3 files stored on a Micro SD card formatted to FAT32
can be played by the speaker.
Audio source connected via AUX in
Connect the included 3.5 mm audio cable to the 3.5 mm AUX input (8) and your
audio source (e.g. CD player, older MP3 player). Note! The music transport
controls (Play/pause (3), Next/previous track (2,5)) are disabled in AUX in
mode. Use your smart device to control the music.
Speaker controls
Play or pause music: press the Play/pause button (3).
Volume up: press the Volume + button (5).
Next track: press and hold the Next track button (5).
Volume down: press the Volume – button 12).
Previous track: press and hold the Previous track button (2). Change
between Bluetooth, SD card and 3.5 mm MIX audio source: press the Power
button (4) multiple times.
Reset the speaker press and hold the power button (4) for 8 seconds.
Microphone controls
Power on/off: press and hold the Power button (12)
Mute microphone: press the Mute button (12)
Volume up: press the Volume + button (13) multiple times.
Echo effect press and hold the Echo effect button (13) to turn the echo
effect on/off.
Volume down: press the Volume – button (14) multiple times.
Voice effect press the Voice effect button (15) to turn on the voice
effects. Press the button multiple times to cycle through the 5 available
voice effects. Press and hold to turn the voice effect and echo off.
LED lights
Turn on the speaker. Press and hold the LED light button (6) to turn on the
LED light effect. Press the LED light button again to cycle between 10
different light effects that change or react with the music or cycle
independently of the music. Press and hold the LED light button again to turn
the LED light effect off.
Safety information
The speaker contains a rechargeable Li•ion battery, and the battery cannot be replaced. Do not open or disassemble the product. This appliance can be used by children aged 8 years under adults’ supervision or if they have received instructions on how to use the appliance safely and understand the dangers involved. Cleaning and maintenance operations by the user must not be carried out by children unless they are over 8 years of age and operate under supervision. Keep the appliance and its cord out of the reach of children under the age of 8. Simplified EU Declaration of Conformity Kjell & Company hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Full text of the EU declaration of conformity is available at www.kjeficom124320.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>