Rubicson 49026 Keyfinder with Remote User Manual
- June 6, 2024
- rubicson
Table of Contents
Rubicon 49026 Keyfinder with Remote
Specification
- Batteries: 2x AAA (not included), 4x CR2032 (included)
- Working distance: 15 – 35 m (open space)
- Volume: 75- 80 dB
- Frequency: 433.92 MHz
- Frequency Range: 0.849 dBm
Batteries
Follow the steps below to install batteries into the transmitter and receiver.
Transmitter
Remove the battery door located on the back of the transmitter. Insert two
AAA batteries according to the(+) and(-) marks inside the battery compartment.
Push the battery door back into place.
Receivers
Each receiver requires a CR2032 button cell battery (included). Put the battery into the battery compartment, make sure the “+” side of the battery is facing up. Put the battery cover back.
Use
Attach the color-coded receivers to your frequently lost items with the keyrings or double side tape. Press and release the corresponding color-coded button on the transmitter. If the receiver is in range, it will beep and meanwhile, the LED indicator will flash. If no beep is heard, change your location or use new batteries and press the button again.
Safety information
Replace used batteries with new ones of the same type. Dispose of used batteries according to local regulations.
Note:
If you encounter any problems with the manual, please go to
www.kjell.com/49026 for an updated version.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>