Rubicson 47001 Ice Crusher Instruction Manual
- June 6, 2024
- rubicson
Table of Contents
Rubicson 47001 Ice Crusher
Read the instruction carefully before using your appliance for the first time.
Specifications
Name | Ice crusher | Rated time | 1 minute |
---|---|---|---|
Size | 100x130x285MM | ||
(including base) | Weight | about 0.8kg | |
Voltage | AC 220-240V | Power | 30W |
Rated Frequency | 50Hz/60Hz |
Safety Instruction
-
Before using the appliance, please read this Safety Instruction carefully.
-
Comply with the safety precautions.
-
Please save this instructional manual after the first application.
-
Appliances can be used by persons with reduced physical, sensitive or mental capabilities or lack of experience and knowledge, if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.
-
Children shall not play with the appliance.
-
Switch off the appliance and disconnect it from power supply before changing accessories or approaching moving parts in use.
-
Always disconnect the appliance form the power supply if it is left unattended and before assembling, disassembling, or cleaning.
-
This appliance shall not be used by children. Keep the appliance and its cord out of reach of children.
-
Misuse of this appliance may lead to potential injury
-
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similar qualified person to avoid a hazard.
-
Care shall be taken when handling the sharp cutting blades, emptying the bowl and cleaning the appliance.
-
Be careful if hot liquid is poured into the appliance, as it can be ejected out of the appliance due to sudden steaming.
-
Power cord
-
Power plug
-
ON/OFF switch button
-
Main body
-
Ice press plate
-
Spike
-
Ice box
-
Inner ring (The ice amount can not exceed the height of the inner ring)
-
Ice position
-
Outlet
-
Base
Correct Usage
- Do not use it on the dining table or similar places.
- Prevent the child from using this appliance, and keep it away from the children’s reach.
- Do not connect the plug before inserting the main body into the ice box.
-
Take the main body out from the ice box.
- Please put the product on flat surface hold the ice box firmly with one hand, and rotate the main body clockwise with another hand, to coincide with mark.
- Please put the product on flat surface hold the ice box firmly with one hand, and rotate the main body clockwise with another hand, to coincide with mark.
-
Put the ice cubes into the ice box.
-
Put the ice cubes from the ice making device on the market into the ice box, and make sure the ice cubes are under the maximum line of ice box.
-
Make sure the top surface of ice cubes are flat, then connect ice box with main body. If the amount of ice cubes is over the maximum line or the top surface of the ice cube is not flat, it can’t be closed.
-
Do not use the rock ice sold in the supermarkets or convenience stores.
-
-
Connect the ice box with the main body.
-
First of all, make sure that the ice box is assembled on the base completely.
As shown in the right picture: hold the ice box tightly by one hand, then press the main body hardly with another hand and make sure the mark ▲ fit with coincidentally, rotate the main body counterclockwise to the position of mark, until hearing the sound of “click”, and it means it is installed in place.
-
If the amount of ice cubes is over the maximum position or the top surface of ice cubes is not flat, it can’t be closed.
-
Do not be blocked by the inner reinforcing rib when assembling the main body with ice box.
-
-
Please insert the plug into the socket.
- It is dangerous to touch plug with wet hand, and make sure that your hands are dry before touching the plug.
- It is dangerous to touch plug with wet hand, and make sure that your hands are dry before touching the plug.
-
Shave ice
- Hold the main body and ice box tightly with two hands, slowly lift it and press the switch button during lifting.
- The base is not needed when lifting the appliance for using.
- The appliance will not work without pressing the switch button.
- Even if there is no ice cube in the ice box, the appliance will not stop working when you press the switch button, so do not forget to release the switch button when there is no ice cube in ice box.
Possible Phenomena During Shaving
-
When the ice is stuck, you will hear a locking sound.
Please stop working. This is a normal phenomenon, which is not fault. -
With the reduction of ice cubes, the side of ice cubes touching the blade will become smooth, and the shaving amount will decrease.
Solutions:
No matter what has happened, please turn off the switch and start it again. If
the problem still can’t be solved, please take the ice box away from the main
body, shake the ice box, reduce the amount of ice cubes, and then switch on
after re-assembly.
-
Remove the main body, throw the ice cube way.
-
Because of the structure, it is a normal phenomenon that there might be residual ice cubes in the box, which is not fault.
Make sure to throw the residual ice cubes away for the next application.
If there are residual ice cubes in the ice box, and you continue adding ice cubes, it will cause idling. -
Please pull out the plug after using.
-
Sometimes, the water attaching to the main body will fall, please put the main body on the cloth to absorb the moisture.
-
Do not reverse the main body.
-
- During continuous shaving of ice, please make sure a minimum interval of 30 seconds.
Cleaning and Storage
- Make sure to pull out the plug.
- Put the appliance on the bottom base.
- Remove the main body from the ice box.
- Put the appliance on a flat surface, hold the ice box tightly with one hand, and rotate the main body clockwise with another hand.
- Wipe the main body, ice press plate and spikes with dry cloth. Pour the neutral lotion onto the cloth, dry it gently, and wipe the hard dirt.
- Please store the appliance in dry condition.
- Invert the ice box after cleaning, until moisture is dry. Make sure to keep the blade dry.
- Don’t touch the spikes and blades with hands during cleaning.
- Don’t soak the appliance into the water or pour water on it, it may cause electric shock.
- It may rust or mildew if the appliance is not used for a long time, and you could smear edible oil on the blade and store it after complete drying.
Environment
Meaning of crossed – out wheeled dustbin:
Do not dispose of electrical appliances as unsorted municipal waste, use
separate collection facilities. Contact your local government for information
regarding the collection systems available. If electrical appliances are
disposed of in landfills or dumps, hazardous substances can leak into the
groundwater and get into the food chain, damaging your health and well-being.
When replacing old appliances with new ones, the retailer is legally obligated
to take back your old appliance for disposals at least free of charge.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>