Rubicson 47103 DCF Wall Clock User Guide
- June 6, 2024
- rubicson
Table of Contents
47103 DCF Wall Clock
STRÅLA
User Guide
Use
Insert one AA battery. Mind the polarity. The clock sets itself at 12 o’clock and waits for a radio signal. After approx. 20 minutes the time sets automatically. Do not move the clock while it receives a radio signal. Try a different location if the clock fails to set, prefer ably near a window or outside. Remove the battery and reinsert it after 1 minute to restart the signal reception.
SET
Set the time manually with the SET button. Press and hold the SET button until the correct time is displayed.
RESET
The RESET button is used to reset the time after repairs and assembly of the watch.
REC
Press the REC button for 3 seconds if the signal reception is not working correctly. The clock sets itself to 12 o’clock and searches for a radio signal again. The time set itself when a radio signal is received correctly.
Specifications
Battery:
1 x AA (not incl.)
www.rubicson.com
Box 50435 Malm~
Sweden
2021-03-02
Documents / Resources
|
Rubicson 47103 DCF Wall
Clock
[pdf] User Guide
47103 DCF Wall Clock, 47103, DCF Wall Clock
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>