ALPHACOOL Eisbecher Aurora 250mm Glass Reservoir Instruction Manual
- June 9, 2024
- ALPHACOOL
Table of Contents
ALPHACOOL Eisbecher Aurora 250mm Glass Reservoir
Safety Instructions
Read the safety instructions before starting the installation.
Assembly material
Assembly Eisbecher 2 Aurora Glas
Bracket assembly:
To mount the expansion tank, first screw the brackets to the mounting
brackets with the four M4x12 screws. You can then attach the system to any
120mm or 140mm fan and radiator space.
Rising pipe positions:
Remove the pump and stand bracket, unscrew the holder screws marked in red.
Carefully pull out the cover with linkage and then the glass tube. Replace the desired riser tube. The riser tube is plugged in.
Inlay Position:
Make sure that the filter with the inlay is always positioned on the top left.
Only in this position is the water flow guaranteed.
Tower assembly:
Use the four M4x8 screws in conjunction with the M4 nuts. Depending on the enclosure type, there are further fastening options
Radiator assembly:
Use the four M3x5 screws for mounting the radiator.
Note : That depending on the radiator size, as in the example 240-30 and 280-30 X-Flow, the bracket must be rotated.
Radiator example : 120-30 and 140-30 X-Flow. In this example, the holders do not need to be rotated.
Connection options:
Connect the tubing to the Reservoir as you wish. The examples show some possibilities. Close all openings that you do not need with the screw plug.
We recommend only clear cooling liquids from our own production (CKC, Tec Protect or Eiswasser Crystal – no UV”!) or pure distilled or osmosis filtered water for refilling.
aRGB Connection
Imprint:
Alphacool International GmbH Marienberger Str. 1 38122 Braunschweig
- Support : +49 (0) 531 28874 – 0
- Fax : +49 (0) 531 28874 – 22
- E-Mail : [email protected]
General Managers: Andreas Rudnicki, Fabian Noelte WEEE-Reg.-Nr.: DE 54464644 Trade Register: Amtsgericht Braunschweig HRB 202390 VAT.ID.Nr.: DE270458421 Tax number: 13/207/02047