ACCORD LIGHTING 7060 Wooden Slats Table Lamp Instruction Manual
- June 9, 2024
- ACCORD LIGHTING
Table of Contents
ACCORD LIGHTING 7060 Wooden Slats Table Lamp
WARNING!
Be sure electrical power is OFF before and during installation or maintenance.
The luminaire must be installed by a qualified electrician, in accordance with
all applicable local codes.
Ensure that the rated luminaire voltage requirements are compatible with the
available mains supply in which it will be installed.
All LEDS are included in your lamp. Never touch the LED surface with your bear
hands as this may reduce the life of your LED.
Do not alter, relocate or remove any electrical component.
Line: Stecche Di legno
Family: Table Lamp
Description: Stecche Di Legno Accord Table Lamp 7059
Material: Natural Wood Veneer MDF and Lined Shade Weight:
MOUNTING YOUR LUMINAIRE
Turn OFF the power before start the installation.
-
Once all parts have been removed from box along with any protective packing, rotate the lower support base in the clockwise direction.
-
Once the E-26 socket is visible, install a standard E-26 lightbulb (not included) into the lampholder within the luminaire. Use only lightbulbs that do not exceed the maximum wattage rating (25W).
-
After the E-26 lightbulb is installed, fit the support base to the table lamp shape, rotating in the indicated direction untill it brakes.
-
Align and mark positions of holes using L drilling template. Make the holes with a 8mm drill and install the provided plastic bushing.
-
Attach the support using the supplied screws into the installed plastic wall plugs.
-
Snap the bracket to the L
-
Plug it into a proper electrical outlet.
Turn ON electrical power.
Your luminaire is now ready for use. -
Use the electrical switch to turn it ON/OFF.
ATENTION!
FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY CAUSE ACCIDENTS AND LOSS OF
PRODUCT WARRANTY. Its recommended to read these instructions completely and
carefully before proceeding.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ACCORD Lighting guarantees coverage against manufacturing defects including
electrical components and finishes, for a period of three years, under normal
use, from the date of purchase. For warranty service, please contact your
local dealer for further instructions. Proof of date of purchase will be
required for validation of warranty service.
The responsibility of the manufacturer regarding the product warranty is
related to the correct observation of the instructions contained in this
manual.
The manufacturer is not responsible for any damage to the product caused by
accidents, alterations of any kind, improper usage or improper installation.
See the website for additional warranty details.
ACCORD Lighting reserves the right to change the dimensions and specifications
contained in this manual without prior notice, in accordance with its policy
of continuous product improvement. Please, contact the manufacturer if
additional information is necessary. The illustrations in this manual are for
guidance only and may vary in scale, dimensions and model details.
accordlighting.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>