Fronius 50kA-3 Smart Meter Installation Guide
- June 8, 2024
- Fronius
Table of Contents
**
**
Fronius 50kA-3 Smart Meter
Wiring diagrams
Fronius Smart Meter 50kA-3 è ottimizzato per la misurazione con trasformatori di corrente nella rete da 400 V. È possibile configurare Fronius Smart Meter per utiliz-zare trasformatori di tensione. La gamma di tensione non è però adatta ai trasforma-tori di tensione comunemente disponibili sul mercato. Fronius non esprime alcuna raccomandazione per i trasformatori di tensione adatti.
Modbus transmission
Transmission speed: 9600 baud
Address: 1
Parity bit: none
Follow the operating manual Fronius Symo Hybrid in the case of hybrid appli-
cations.
Min. Software version: Datamanager 3.7.2 / Energypackage 1.3.3
Terminal capacity: 0,05 – 4 mm²
Specified operating range: 5 °C …. + 55 °C
Power consumption: 2,5 W
Programming
Only the transformation ratio of the current and voltage transformer must be
set. All other para-meters have already been set in advance.
- Important! Changing the transformation ratios will reset the counters in the Fronius Smart Meter to 0.
- CT Transformation ratio x VT Transformation ratio = max. 1 000 000
- Conversion only with the use of voltage converters (Direct voltage measurement VT = 1)
Fronius Worldwide
www.fronius.com/addresses
Fronius International GmbH 4600 Wels, Froniusplatz 1, Austria
E-Mail: pv-sales@fronius.com
http://www.fronius.com
Under http://www.fronius.com/addresses you will find all addresses of our
sales branches and partner firms!
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>