Loolinn U61 Drones for Kids with Camera Mini Drone Installation Guide

Loolinn U61 Drones for Kids with Camera Mini Drone

Overview of drone and transmitter Drone

Main parameter

Drone Size| 140x140x43.5mm| Flying Distance/Radius| 50m

20~30m

2.4Ghz

---|---|---|---
Weight of drone| 63g| Streaming Video

Range/Radius

Flight time| 6~ 7 mins
Drone battery| 3.7V x 500mAh| Frequency
Charging time of drone battery| ~80 mins

Exploded View

Transmitter

Notice: Taking photos and recording videos are available after connecting with a smartphone.

Key Function

Left click: Move the Stick forward/backward/left/right to fly the drone up / down / turn left / turn right.

Right stick : Move the Stick forward / backward/left/right to fly the drone forward / backward/ left/ right.
Photo: Press the key to take one photo.
Video : Press down the button, and start to record the video. Press again to exit the video recording.
Power switch: Press down the power switch to turn on the transmitter, and press down again to turn off the transmitter.
Headless mode: Press to enter Headless Mode. Press again to exit Headless Mode.
High / medium /low-speed mode: Press the key to switch to High

/Medium/ Low Speed.

Takeoff / landing g/emergencystop key: After frequency pairing, press once, and the drone will take off automatically. Press again and the drone will land automatically. Press and hold the button for more than 1 second for an emergency landing. The drone propellers will stop and land.
Trimmer Mode Button: Press this button and move the right stick to the required trimmer direction, then it will adjust the direction accordingly. Release the stick-to-end trimmer mode.

Battery Installation

Open the battery cover of the transmitter, insert 4 AA batteries following the polarity indicators ( Picture 1, battery is not included) and then screw it.(Picture 2)

Notice:

1. Make sure the electrodes are correct.
2. Do not mix new batteries with the old ones.
3. Do not mix different kinds of batteries.
4. Do not charge the nonrechargeable battery

Phone Holder Installation Instruction

1. Take out the phone holder and insert it into the transmitter(Picture 3).
2. Pull out the upper lamp of the holder ( Picture 4/5), and put the phone obliquely into the holder. then release the clamp, and the phone will be fixed on the holder( Picture 6).
3. When taking out the phone clip, you need to press the clip buckle behind the phone clip at the same time, so that the buckle can be closed and removed easily.

Notice: Do not pinch the buttons on the mobile phone.

Parts installation

Charging Instruction for Drone Battery

1. Connect the drone battery with USB cable first and then choose one of the method as below picture shown to connect with USB plug.
2. The indicator light on drone battery will become red and It will turn green when fully charged.

For faster charging, it is recommended to use an adapter with 5V 2A output

Li-Po Battery Disposal & Recycling

• Wasted Lithium-Polymer batteries must not be placed with household trash.
• Please contact the local – environmental or waste agency or the supplier of your model or your nearest Li-Po battery recycling center

Assemble/Disassemble the Propellers

• To disassemble, press the motor and gently pull the propeller upward with another hand.
• To install the propeller, align and snap on the propeller blade to the motor.

Note: Align propeller A with the motor marked A, and align propeller B with the motor marked B.

Drone battery installation
When installing, insert the battery into the drone as per diagram (on picture 8) and the battery sticker should be facing upward. When removing, pull up the drone buckle and pull out the battery buckle (Picture 9).

Precautions before flying

1. Make sure the transmitter and the battery of the drone are fully charged.
2. Before starting, please confirm that the left stick of the transmitter is in the middle position.
3. Please follow the correct steps to turn on the drone/trans- mitter. Before flight, turn on transmitter and then the the drone. After flight, turn off the drone and then transmitter. Turning ON/OFF incorrectly may cause the drone to lose control.
4. Make sure to correctly install the battery, motor, etc.
5. Check the rotation direction of the propellers. The left front & right rear propeller A should rotate clockwise. The left rear & right front should rotate counterclockwise.
6. Improper operation may cause drone crash, which may cause a motor defect, prevent you from flying, and other issues. Please go to the local distributor to buy new parts for replacement so that the drone will return to its best

Flying steps Syncing Frequencies

• Turn on the transmitter and the power indicator light flashes rapidly.
• Pull the left stick to the lowest position and then release.
• The power indicator on the transmitter will flash slowly and the controller is ready for pairing.
• Turn on the drone. The drone body lights will stop flashing and turn a solid color, indicating successful frequency pairing, and then enter the remote control mode.

Take off

• After calibration successfully, press this button, and the drone will fly up and keep flying at an altitude of approximately 1.2 meters automatically.

Landing

• Press it to land the drone automatically. (In this mode,
• DO NOT touch the left stick, otherwise, it might not work).

Emergency Landing

• In an emergency situation, such as if it is about to hit people or obstacles, press the Take Off/ Landing / Emergency Stop
• Button and hold it for more than 1 second. The propellers will stop immediately and the drone will fall.
• Note: Do not activate this function unless in an emergency situation. Because the drone will fall when the motors stop working.

Calibration (This action is operated when flying abnormally)

• Push the right stick as the picture shows after successful frequency pairing. Please lose it when the drone body light flash quickly, indicating that gyro calibration is completed.
• Tips: Crashing the drone may cause the connection to fail, making the drone hard to control. If this occurs, try repairing and recalibrating. It must be placed on a surface!

Unlocking/locking the motor

Unlock the motor:

• Move the left stick and right stick at the same time 45 degrees inward.

Lock the motor:

• When the motor is working, it could be used to stop the motor urgently (Move the left stick and right stick at the same time 45 degrees inward).

Flight Control

Forward/Backward Trimmer

• When flying, if the drone tilts forward, press the trimmer button, and push the right stick backward. Otherwise, push forward.

Left/Right Tilts Trimmer

• When flying, if the drone tilts to the left, press the trimmer button, and push the right stick to the right. Otherwise, push to the left.

Left/Right Rotates Trimmer

• When flying, if the drone head rotates to the left, press the trimmer button, and push the left stick to the right. Otherwise, push to the left.

Functions Instruction

Constant Height Mode

The intelligent flight control system calculates the hovering position, making it easier for beginners to control. Release the stick, the drone will keep hovering, capturing clear aerial photos & videos.

High / Medium/Low-Speed Mode Switch
Press down on the key, it will beep, this indicates the low-speed mode “L”; Press down again, and it will beep twice, for the middle-speed mode “M”; Press down again it’ll beep three times, and for the high-speed mode “H”.

Low-Speed Mode “L”

• It’s suitable for beginners to operate in calm weather, with no breeze.

Medium speed Mode “M”

• It’s suitable for those practicing (hobbyists) to operate, with or without a breeze.

High-Speed Mode “H”

• It’s suitable for professionals in most outdoor wind conditions.

Headless Mode

• The default setting is NOT Headless Mode.
• Under headless mode, the users can operate the drone without worrying about the orientation (left is left and right is right all the time, regardless of where your drone is pointing at).
• You can activate the headless mode function before taking off or in flight. Flying under headless mode, your drone direction should be aligned with you. DO NOT change the direction of your transmitter, keep it flying in front of you at all the times. (See below picture).
• WARNING: THE DRONE SHOULD BE IN FRONT OF YOUR TRANSMITTER BEFORE ENTERING THIS MODE AND KEEP IT. OR THE DRONE MIGHT LOSE CONTROL OR FLY AWAY.
• Press the headless mode button to activate the function, at this time the LED light on the rear of drone keeps shiny for three times and stops for 1s; To exit the Headless Mode, press the button again, at this time the An LED light on the rear of the drone will turn a solid color.

Low Battery Alarm

• When the transmitter or drone has a low battery, it will beep to remind the user to land the drone and replace the batteries as soon as possible Or it might be out of control.

Range Alarm

• When the drone is out of range or almost at the max remote control distance, it will beep to alert the user to fly back ASAP. Otherwise, the drone might be out of control or fly away.

Stuck Protection

1. When the propeller is stuck, the LED light of the drone will have a quick flash. Then the Stuck Protection will be activated and the motors will stop working.
2. Pull down the left stick to the lowest position and then release it, the drone LED will become a solid color and stuck protection will be released and the drone can fly again.

To know your APP

Download and install APP: Loolinn
This software is suitable for mobile phones in the 10S and Android systems, please surf the mobile phone application store website to download and install it.

1. The user of an ISO mobile phone can surf Loolinn in APP Stores to download.
2. The user of Android can surf Google play to search Loolinn.
3. You can scan the QR code on the right or the QR code on the color box directly to download and install it.

How to connect the drone to the phone via WiFi

• A. Power on the drone (or insert the battery), then place the drone on a flat surface.
• B. Go to phone Setting ›WLAN(WiFi) ->Select and connect to the WiFi”cooling
• C. Open the APP”Loolinn” and click “Start” to enter the remote control interface to experience real-time transmission.
• Notice: For more details about App operation, please surf the Help” in App first before entering the operation interface.

Display the photos and video

• The photos and videos are stored in the phone’s local gallery, you can display on the phone directly. You also can display it in the APP through a shortcut icon to enter the media interface.
• Notice: The app must be authorized to access the phone gallery, if not, then maybe unavailable to display the video and photos.

Assembly Parts List

(Sold separately)

There are components for choice below. For your convenient purchase, we list each part for you, you can purchase ones you want from local distributor

Statement

Our products are constantly improved,so designs and specifications are ready to change without notice.
All the information on this guidebook is carefully proofread, we make every effort to be accurate. If any wrong printing, our company reserves the right of final interpretation.

Replace the batteries with the same type.
2. Mixed battery positive and negative pole.| 2. refer to the instructions of battery installa tion, install them.
3. Poor Connection.| 3. Clear out the dirt between the battery and the cells.
2| ** The transmitter can’t connect to the drone.| 1. The indicator lights don’t work.| 1. Refer to the solutions above.
2. There are interterence signals nearby.| 2. Restart the drone and the transmitter.
3. Incorrect operation.| 3. Operate it according to the instructions.
4. Damage caused by repeated heavy impact on the transmitter or drone.| 4. To purchase new ones or replace them in time from the local distributor.
3| ** Lack ot power or unable to try.| 1. The propellers are in severe deformation.|

1. Replace the new propeller with the same type.

2. Low battery.| 2. Charge the battery according to the instruction.
3. Incorrect installation of propellers.| 3. Refer to the instructions, and replace the right and new propellers.
4| Can 1 hover and stop to one side?| 1. The drone is not calibrated.| 1. Refer to the Calibration Step in the guidebook.
---|---|---|---
2. Propellers are decorated.| 2. Replace the new propellers with the same type.
3. Motor seal is not vertical after deformation.| 3. Replace the new components of the motor seal.
4. The gyroscope did not reset after a violent impact.| 4. Place the drone on the horizontal ground for about 10 seconds or restart the drone,

then operate ii according to the inst ructions.

5. Motor is damaged.| 5. Refer to the instruction, replace the right motor.
5| The indicator lights don’t work.| 1. Low battery.| 1. Charge the battery refer to the instruction.
2. Battery expired or over­ charged protection.| 2. Purchase new batteries from the local distributor or charge the battery according to the procedures.
3. Poor contact.| 3. Unplug the power plug and insert again correctly.
6| Unable to sellhe height.| 1. Severe propeller deformatoi n.| 1. Replace new propeller.
2. Motor damage.| 2. Replace new motor.
3. Instability of atmospheric pressure.| 3. Refer to the fixed height mode in the guide.
7| Hardto control by cellphone.| Not experienced enough.| Practice and read the cellphone controlling instructions carefully.

FCC Note

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Notice

The equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. Modifications not authorized by the manufacturer may void the user’s authority to operate this device.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>