Vantron VT-HMI-101NC-TPK12-4 Touchscreen Monitor User Manual
- June 13, 2024
- Vantron
Table of Contents
Vantron VT-HMI-101NC-TPK12-4 Touchscreen Monitor
Product Information
- Product Name: [Insert Product Name]
- Product Model Number : [Insert Model Number]
- Manufacturer: [Insert Manufacturer Name]
- Product Description: [Insert Product Description]
Product Usage Instructions
- Unpacking and Setup:
- Remove all packaging materials from the product.
- Place the product on a stable surface.
- Connect the necessary cables and power supply according to the user manual.
- Ensure that the product is properly connected and powered on.
- Basic Operation:
- Familiarize yourself with the product’s control panel and buttons.
- Refer to the user manual for instructions on navigating the product’s menu or settings.
- Use the appropriate buttons or controls to perform desired functions.
- Maintenance and Cleaning:
- Regularly clean the product using a soft, dry cloth.
- Avoid using harsh chemicals or abrasive materials that may damage the product’s surface.
- Refer to the user manual for specific cleaning instructions and recommendations.
- Troubleshooting:
- If you encounter any issues with the product, refer to the troubleshooting section in the user manual.
- Contact customer support or the manufacturer for further assistance if necessary.
Please note that the above instructions are general guidelines. For specific usage instructions and safety precautions, refer to the complete user manual provided with the product.
Copyright Notice
While all information contained herein have been carefully checked to assure
its accuracy in technical details and printing, Vantron assumes no
responsibility resulting from any error or features of this manual, or from
improper uses of this manual or the software. Please contact our technical
department for relevant operation solutions if there is any problem that
cannot be solved according to this manual.
Vantron reserves all rights of this manual, including the right to change the
content, form, product features, and specifications contained herein at any
time without prior notice. The latest version of this manual is at
www.vantrontech.com.cn. Please contact
Vantron for further information: Vantron Technology (Vantron)
E-mail: sales@vantrontech.com
The trademarks and registered trademarks in this manual are properties of
their respective owners. No part of this manual may be copied, reproduced,
translated or sold. No changes or other purposes are permitted without the
prior written consent of Vantron. Vantron reserves the right of all publicly-
released copies of this manual.
The trademarks and registered trademarks in this manual are properties of their respective owners. No part of this manual may be copied, reproduced, translated or sold. No changes or other purposes are permitted without the prior written consent of Vantron. Vantron reserves the right of all publicly- released copies of this manual.
Notes
Applicable notes are listed in the following table:
Statement
It is recommended to read and comply with this manual before operating VT-HMI-
101NC-TPK12-4 which provides important guidance and helps decreasing the
danger of injury, electric shock, fire, or any damage to the device.
FCC compliance statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Exposure to radio frequency energy:
The radiated output power of this device meets the limits of FCC radio
frequency exposure limits. This device should be operated with a minimum
separation distance of 20 cm (8 inches) between the equipment and a person’s
body.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, it not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Disclaimer
Vantron assumes no legal liability of accidents resulting from failure of
conforming to the safety instructions.
- For direct or indirect damage to this device or other devices of Vantron caused by failure of conforming to this manual or the safety instructions on device label, Vantron assumes neither warranty nor legal liability
- even if the device is still under warranty.
- The VT-HMI-101NC-TPK12-4 should be installed, debugged and maintained by professional people.
- The outside antennas are not permitted to be installed or to be changed by non-professional people. To run the device normally, only specify antennas are approved to be assembled together by professional people.
- Unit shall be used with indoor-use antenna only. No antenna for this unit can be installed outdoor.
Safety Instructions
- Keep and comply with all operation instructions, warnings, and information.
- Pay attention to warnings on this device.
- Read the following precautions so as to decrease the danger of injury, electric shock, fire, or any damage to the device.
- Operations and Service instructions are provided with theequipment.
- Unit shall be used with indoor-use antenna only. No antenna for this unit can be installed outdoor.
- The maximum operation temperature is 61°C.
Precautions
Pay attention to the product labels safety instructions printed on silk
screens.
Do not try repairing this product unless declared in this manual.
Keep away from heat source, such as heater, heat dissipater, or engine casing.
Do not insert other items into the slot (if any) of this device.
- Keep the ventilation slot ventilated for cooling.
- System fault may arise if other items are inserted into this device.
Installation: ensure correct installation according to instructions from the manufacturer with recommended installation tools. Ensure ventilation and smoothness according to relevant ventilation
Safety Instructions for Power Cables and Accessories
WARNING: Proper power source onlyStart only with power source that satisfies voltage label and the voltage necessary according to this manual. Please contact technical support personnel of Vantron for any uncertainty about the requirements of necessary power source. Use tested power source This product still contains a button lithium battery as a real-time clock after its external power source is removed and therefore should not be short-circuited during transportation or placed under high temperature.
Place cables properly: Do not place cables at any place with extrusion danger.
Cleaning Instructions
- Please power off before cleaning the device.
- Do not use spray detergent.
- Clean with a damp cloth.
- Do not try cleaning exposed electronic components unless with a dust collector.
- Support for special fault: Power off and contact technical support personnel of Vantron in case of the following faults:
The device is damaged.
- The temperature is excessively high.
- Fault is still not solved after the operation according to the manual.
VT-HMI-101NC-TPK12-4 Hardware Instructions
Product Appearance
Specifications
Interface Instructions
Dimensions
Interface Description
Ethernet Interface (POE )
Standard RJ45 interface, supporting 10M/100M/1000M self-adaptation, support
POE power supply.
USB2.0 Interface
Standard USB TYPE-A connector
USB Host Connector
- Dual vertical USB A type interface, supporting 1xUSB3.0(Top), 1xUSB2.0(down).
- Upper USB port is USB3.0 port.
- Under USB port is USB2.0 port.
Operation Notice
Power Supply
Please make sure using adapter in the accessory, or the power is not reversed
when powered by other adapter.
POE Power Sourcing Equipment (PSE) type select
- When used Phihong POE8OU or POE6OU PSE, add the CONN jumper,
- When used other standard PSE.remove the CONN iumper.
Tips
Waste Disposal
- It is recommended to disassemble the device before abandoning it in conformity with local regulations. Please ensure that the abandoned batteries are disposed according to local regulations on waste disposal.
- Do not throw batteries into fire (explosive) or put in common waste canister. Products or product packages with the sign of “explosive” should not be disposed like household waste but delivered to specialized electrical & electronic waste recycling/disposal center.
- Proper disposal of this sort of waste helps avoiding harm and adverse effect upon surroundings and people’s health. Please contact local organizations or recycling/disposal center for more recycling/disposal methods of related products.
Comply with the following safety tips:
- Do not use in combustible and explosive environment
- Keep away from combustible and explosive environment for fear of danger.
WARNING: Keep away from all energized circuits.
Operators should not remove enclosure from the device. Only the group or
person with factory certification is permitted to open the enclosure to adjust
and replace the structure and components of the device. Do not change
components unless the power cord is removed.
- In some cases, the device may still have residual voltage even if the power cord is removed. Therefore, it is a must to remove and fully discharge the device before contact so as to avoid injury.
- Unauthorized changes to this product or its components are prohibited.
- In the aim of avoiding accidents as far as possible, it is not allowed to replace the system or change components unless with permission and certification. Please contact the technical department of Vantron or local branches for help.
CAUTION: Pay attention to caution signs. Caution signs in this manual remind of possible danger. Please comply with relevant safety tips below each sign. Meanwhile, you should strictly conform to all safety tips for operation environment.
Notice
- Considering that reasonable efforts have been made to assure accuracy of this manual, Vantron assumes no responsibility of possible missing contents and information, errors in contents, citations, examples, and source programs.
- Vantron reserves the right to make necessary changes to this manual without prior notice. No part of this manual may be reprinted or publicly released in forms of photocopy, tape, broadcast, e-document, etc.
IC statement
Disclaimer:
Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
Warning: This class B digital apparatus complies with Canadian ICES-003.
Industry Canada ICES-003 Compliance Label: CAN ICES-3 (B)/NMB-3(B)
RF exposure warning
This equipment must be installed and operated in accordance with provide
instructions and the antenna used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons and must not
be co-located or operation in conjunction with any other antenna or
transmitter. End-users and installers must be provide with antenna
installation instructions and transmitter operating conditions for satisfying
RF exposure compliance.
CONTACT
- US Office: Vantron Technology, Inc.
- Address: 440 Boulder Court, Suite 300, Pleasanton, CA 94566
- Tel: +1 916-202-7042
- Email: sales@vantrontech.com
- China Office: Chengdu Vantron Technology, Ltd
- Address : 6th Floor, Ist Building, No.9, 3rd WuKe East Street, WuHou District, Chengdu, P.R. China 610045
- Tel: 86-28-8512-3930/3931, 8515-7572/6320
- Email: sales@vantrontech.com.en
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>