BURG WACHTER 610 Scan and Lock Instruction Manual
- June 17, 2024
- BURG WACHTER
Table of Contents
Scan & Lock 610 / 53
610 Scan and Lock
Manual video
(German)
https://www.youtube.com/watch?v=NZnWSOHIdxU
www.burg.biz
Structure
A
Lock body and shackle
B USB type-C port
C Emergency lock
D Fingerprint sensor
E Indicator light
Features
Easy Operation:
Up to 10 fingerprints can be programmed (1x administrator, 9x user)
Waterproof & Dustproof:
IP65, protected from rain and dust.
Unlocking in 1 second:
Quick-recognition technology, identify your fingerprint quickly.
Low Power Consumption:
After being fully charged, up to 1,800-2,000x locking and unlocking possible.
Ways to unlock
Note:
Pull the shackle after release via the fingerprint or open it upwards using
the key.
Operating instructions: Fingerprint sensor
Opening with fingerprint
| Action | Beeps | LED | Explanation |
|---|---|---|---|
| To activate: press the shackle once | Blue flashing | Note: At the |
factory and in delivery
condition, the lock can be opened with
any fingerprint. The lock is individualised
when it is set-up by the administrator.
To open: place your finger on the sensor for around 1 sec.| Two beeps| Blue
shining
Set administrator account
Action
| | Beeps| LED|
Explanation
---|---|---|---|---
To activate, press the shackle down once| | | Blue flashing|
Press fingerprint sensor around 3s| | Two beeps, 3 sec. pause, one beep| Blue
shining|
Input administrator fingerprint, 10 times| | One beep| Blue flashing, lx|
Input finger again
| Neli piiksu Four beeps| Vilgub punaselt Red flashing| Finger not registered,
input again
| | Pikk piiks Long beep| Poleb siniselt Blue shining| Programming finished
| Uks piiks One beep| Poleb punaselt Red shining| Restart programming with 1st
step
Set user account
| Action | Beeps | LED | Explanation | |
|---|---|---|---|---|
| To activate: press the shackle down once | Blue flashing | |||
| Press fingerprint sensor around 3s | Two beeps | Blue/red flashing | ||
| Place administrator fingerprint | One beep | Vilgub siniselt, lx | Blue |
flashing, lx
| Four beeps| Red flashing| Place administrator finger again
Place user fingerprint, 10 times| | One beep| Blueflashing, lx| Place finger
again
| Four beeps| Red flashing| Finger not registered, input again
| | Long beep| Blue shining| Programming completed
| One beep| Red shining| Restart programming with 1st step
Reset
| Action | Beeps | LED | Explanation | |
|---|---|---|---|---|
| To activate: press the shackle down once | Blue flashing | |||
| Place administrator fingerprint, 8 sec. | Two beeps | Blue/red flashing, | ||
| pause, red flashing | ||||
| Place administrator fingerprint | Long beep | Red shining | Lukk lahtestatud | |
| Four beeps | Red flashing | Finger not registered, place again |
Charging
If the green light flashes after you unlock it, it means the battery is low.
Please charge it in time to avoid locking unsuccessful by fingerprint when the
battery runs out. In order to charge, use the included Type-C USB-cable.
| Action | Beeps | LED | Explanation |
|---|
| | Green
flashing| Note: If the battery is already completely discharged, the lock
can still be opened with the enclosed key.
Charging with enclosed USB-cable| | Green shining
Troubleshooting
| Symptoms | Reasons | Solution |
|---|---|---|
| The light is off when you press the sensor | Battery discharged | Charging the |
fingerprint padlock
In standby status| Please press the shackle
Any finger can unlock| The lock is in factory setting, any finger can be be
used to open be used to open it.| Set administrator account
Cannot unlock| Sensor does not identify finger| Sensor surface or fingerprint
dirty; please clean
Warnings
Please note the following information:
- The output voltage of the adapter must be 5 V when charging.
- Do not insert any extraneous objects into the lock or the USB port.
Warranty
BURG-WÄCHTER products comply with the technical standards at the time of
production and adhere to our own quality standards. The guarantee only covers
defects which can be proved to have resulted from production or material
defects at the time of purchase. The warranty ends after two years, further
claims are excluded. Defects and damage caused by e.g. transport, incorrect
operation, improper use, wear etc. are excluded from the warranty. A short
description of any defects identified must be made in writing and the device
returned to the place it was purchased, together with the original packaging.
After the device has been tested, and within a appropriate period of time, the
guarantor will decide whether or not to repair or exchange the item.
For returns, all undamaged device parts must furthermore be in the factory
setting due to your right of revocation. Failure to comply with this will
invalidate the warranty.
Disposal of the device
Dear customer, please help us to avoid unnecessary waste. Should you
intend to dispose of this device at any time, please remember that many
components of this device contain valuable materials that can be recycled.
Please be aware that electrical and electronic equipment and batteries marked
in this way must not be disposed of with household waste but collected
separately.
Please obtain information on the collecting points for electrical waste from
the responsible authority of your city/ municipality.
BURG-WÄCHTER KG hereby declares that this device complies with the Directives
2014/30/EU, (EMC) and 2011/65/EU (RoHS).
The complete text of the EU Declaration of Conformity is available at the
following Internet address: www.burg.biz
Eesti keeles
Scan &Lock 610 / 53
Printing and typesetting errors as well as technical changes reserved.
BURG-WÄCHTER KG
Altenhofer Weg 15
58300 Wetter
Germany
www.burg.biz
www.burg.biz
SWI/MLO Scan & Lock 610 / 53 ET -EN 040523
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>